Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Progress Lighting P832-TG Remodel Recessed Lighting Housing. Designed for use in existing ceilings, this housing features an integral flange and exclusive locking bars for quick and secure mounting.
Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.
Коопсуздук маалыматы
ЭСКЕРТҮҮ: To avoid fire, shock, or death; always turn off power at the circuit breaker or fuse box before wiring. All wiring must be in accordance with national and local electrical codes.
- Always disconnect power before installing, servicing, or cleaning this fixture.
- Орнотуу квалификациялуу электрик тарабынан аткарылышы керек.
- Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
- This product is UL and CUL listed for damp locations. Do not install in wet locations.
- Rated for 60-degree supply wires in end-of-run applications.
- Rated for 4 #12 90-degree conductors (2 in and 2 out).
Сунуш 65 Эскертүү: Бул продукт сизди Калифорния штатында рак жана тубаса кемтиктер же башка репродуктивдик зыян келтирүүчү химиялык заттарга дуушар кылышы мүмкүн. Көбүрөөк маалымат алуу үчүн төмөнкүгө өтүңүз www.P65Warnings.ca.gov.
Продукт бүттүview
The Progress Lighting P832-TG is a remodel recessed lighting housing designed for easy installation in existing ceilings. Its robust construction and thoughtful design ensure a secure fit and reliable performance.
Негизги өзгөчөлүктөрү:
- Integral flange on housing for a clean finish.
- Exclusive locking bars for quick mounting in ceilings from 1/2-inch to 1-inch thick.
- UL and CUL listed for damp locations and through wiring.
- Rated for 4 #12 90-Degree conductors (2 in and 2 out).
- Medium base lamp розетка.
Компоненттери:
The P832-TG housing consists of a galvanized steel junction box, a flexible conduit connecting to the housing, and the main housing unit with integral flange and locking bars. It is designed to accommodate a medium base lamp and requires a separate trim for a complete fixture.
Figure 1: Progress Lighting P832-TG Recessed Lighting Housing. This image shows the main housing unit, the junction box, and the flexible conduit connecting them.
2-сүрөт: Өлчөмдүү view of the P832-TG housing. Key dimensions include 11-3/8 inches width, 5-1/2 inches height, and 4-13/16 inches extension, with a 4-1/4 inch ceiling opening.
Орнотуу жана орнотуу
Follow these steps for proper installation of the P832-TG housing in existing ceilings. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare Ceiling Opening: Create a 4-1/4 inch diameter opening in the ceiling at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the installation area.
- Зымдарды туташтыруу: Open the junction box cover. Connect the building's electrical supply wires to the corresponding wires in the housing's junction box. Use appropriate wire connectors (not supplied). Ensure proper grounding. The housing is rated for 4 #12 90-degree conductors (2 in and 2 out).
- Корпусту киргизүү: Carefully insert the housing through the ceiling opening. The integral flange will rest against the ceiling surface.
- Коопсуз турак-жай: The exclusive locking bars are designed to secure the housing in ceilings from 1/2-inch to 1-inch thick. As you push the housing into the opening, the locking bars will engage and clamp onto the ceiling material. For thicker ceilings, a small screwdriver or pick can be used to rotate the bar up during installation to ensure proper engagement.
- Install Trim (Sold Separately): Once the housing is securely in place, install the desired recessed lighting trim according to its specific instructions.
- Орнотуу Л.amp: Insert a medium base lamp (bulb) into the socket within the housing.
- Күчтү калыбына келтирүү: Орнотуу аяктагандан жана бардык туташуулар коопсуз болгондон кийин, өчүргүчтөгү кубатту калыбына келтириңиз.
Операция
The Progress Lighting P832-TG Remodel Recessed Lighting Housing operates as a fixture for a medium base lamp. Once properly installed and connected to a power source, the housing will provide illumination when a compatible lamp is inserted and the electrical circuit is activated via a wall switch or dimmer (not included).
l камсыз кылууamp used is compatible with the housing's specifications and your electrical system.
Техникалык тейлөө
The P832-TG housing requires minimal maintenance. Regular cleaning and lamp replacement are the primary maintenance tasks.
- Тазалоо: Before cleaning, ensure power is disconnected at the circuit breaker. Wipe the exterior of the housing and any installed trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Lamp Алмаштыруу: Disconnect power before replacing a lamp. Allow the old lamp to cool completely before removal. Replace with a new medium base lamp of the appropriate wattage жана түрү.
- Текшерүү: Periodically inspect the housing and wiring for any signs of damage or wear. If any issues are found, disconnect power and consult a qualified electrician.
Проблемаларды чечүү
If you encounter issues with your recessed lighting housing, refer to the following table for common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык күйбөйт. | Шайманга күч жок. Lamp is faulty or loose. Зымдарда ката. | Автоматтык өчүргүчтү/ сақтандыргычты текшериңиз. Дубалдагы өчүргүчтүн күйүк экенин текшериңиз. lamp or tighten. Зымдарды текшерүү үчүн квалификациялуу электрикке кайрылыңыз. |
| Жарык жылтылдайт. | Loose lamp. Бошогон зымдар байланышы. Шайкеш келбеген диммер которгучу. | Тартуу лamp. Электр кубатынан ажыратып, зым байланыштарын текшериңиз. Ensure dimmer is compatible with the lamp түрү. |
| Housing is not secure in ceiling. | Locking bars not fully engaged. Ceiling thickness outside specified range. | Ensure locking bars are fully engaged. Re-insert housing if necessary. Verify ceiling thickness is between 1/2-inch and 1-inch. |
Эгерде бул чечимдерди колдонуп көргөндөн кийин да көйгөй чечилбесе, кардарларды колдоо кызматына же квалификациялуу электрикке кайрылыңыз.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | P832-TG |
| Бренд | Прогресс Lighting |
| Материал | иш-аракет кылууга түрткү болот |
| Аяктоо түрү | Бүттү |
| Түс | Бүтпөгөн |
| Жарык булагы түрү | Incandescent (compatible with LED retrofit bulbs) |
| Тtage | 120 вольт |
| Шыптын ачылышы | 4-1/4 дюйм |
| Өлчөмдөрү (L x W x Y) | 5"L x 6"W x 6"H (Product) / 11-3/8" Width x 5-1/2" Height (Housing) |
| Элемент Салмагы | 1.57 фунт |
| Орнотуу ыкмасы | Чыгылган |
| Ceiling Thickness Compatibility | 1/2-inch to 1-inch thick |
| UL/CUL тизмеси | Yes, for damp locations and through wiring |
Кепилдик маалымат
The Progress Lighting P832-TG Remodel Recessed Lighting Housing comes with a 1 жылдык чектелген кепилдик сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or acts of nature. For full warranty terms and conditions, please refer to the documentation included with your product or contact Progress Lighting customer support.
Кардарларды колдоо
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Progress Lighting customer support.
You can also visit the official Progress Lighting store on Amazon for more product information and resources: Прогресс жарыктандыруу дүкөнү
Please have your model number (P832-TG) and purchase information ready when contacting support.
