General Electric 24991

GE универсалдуу алыстан башкаруу пульту колдонуучунун колдонмосу

Модель: 24991

Introduction

This manual provides comprehensive instructions for setting up, operating, and maintaining your GE Universal Remote Control (Model 24991). This remote is designed to simplify your home entertainment experience by controlling up to three different audio/video devices, including TVs, Blu-ray/DVD players, cable/satellite receivers, Roku boxes, and other streaming media players.

GE Universal Remote Control, front view

Фронт view of the GE Universal Remote Control, showing all buttons and the GE logo at the bottom.

Жайгашуу

1. Батареяны орнотуу

The GE Universal Remote Control requires two (2) AA batteries (not included). To install:

  1. Алыстан башкаруунун артындагы батарея бөлүмүнүн капкагын алыңыз.
  2. Бөлүмдүн ичинде көрсөтүлгөндөй, туура полярдуулукту (+ жана -) текшерип, эки AA батарейкасын салыңыз.
  3. Батарея бөлүгүнүн капкагын ордуна коюңуз.
GE Universal Remote Control showing battery compartment and device selection buttons

The remote control, highlighting the device selection buttons and indicating battery requirements.

2. Пулуңузду программалоо

This remote is pre-programmed for Roku and Samsung TVs, allowing immediate control without additional setup for these devices. For other brands and devices, follow the manual programming steps below:

  1. Find the remote codes: Refer to the code library list provided with your remote or visit the manufacturer's website for a comprehensive list of codes for your specific device brand.
  2. Орнотуу режимине кириңиз: басып, кармап туруңуз ЖАЙГАШУУ button on the remote until the red indicator light turns on, then release the button.
  3. Түзмөктүн түрүн тандоо: Press and release the device button on the remote that corresponds to the device you want to control (e.g., TV, DVD, CBL, SAT, Видеомагнитофон). The red indicator light will blink once and remain on.
  4. Кодду киргизиңиз: Using the number buttons, enter the 4-digit code for your device. After entering the code, the red indicator light will turn off.
  5. Пультту текшерүү: Point the remote at your device and test different functions (e.g., Power, Volume, Channel). If the device responds, the programming was successful.
  6. Repeat for Additional Devices: If you have more devices to program, repeat steps 2-5 for each one.
Diagram showing steps to program the GE Universal Remote Control

Visual guide for programming the remote control to a device.

For an easy-to-follow online setup video, please refer to the official product video below:

Official product video demonstrating the setup and features of the GE Universal Remote Control.

Иштөө нускамалары

1. Device Selection

Белгилүү бир түзмөктү башкаруу үчүн пульттун жогору жагындагы тиешелүү түзмөк баскычын басыңыз (мисалы, TV, DVD, CBL, SAT, Видеомагнитофон). Андан кийин пульт ал түзмөккө буйруктарды жөнөтөт.

GE Universal Remote Control with icons for various devices it can control

The remote control alongside icons representing various devices it can control, such as sound bars, home theater systems, TVs, DVD/Blu-ray players, cable/satellite boxes, and streaming media players.

2. Негизги функциялар

3. Өркүндөтүлгөн функциялар

The remote supports advanced functions for DVRs and streaming devices, enabling comprehensive control over your media experience.

GE Universal Remote Control resting on a black armrest

The GE Universal Remote Control positioned on a black armrest, demonstrating its compact size and ergonomic design in a typical home setting.

Техникалык тейлөө

Батареяны алмаштыруу

When the remote's performance degrades or the indicator light does not illuminate, it is time to replace the batteries. Always replace both batteries simultaneously with new AA alkaline batteries. Do not mix old and new batteries or different types of batteries.

Тазалоо

To clean the remote, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the remote's surface or internal components.

Проблемаларды чечүү

КөйгөйЧечим
Алыстан башкаруу түзмөгүңүз иштебейт.
  • Пульт түз эле түзмөккө багытталганын жана эч кандай тоскоолдуктар жок экенин текшериңиз.
  • Verify that the correct device button (TV, DVD, CBL, etc.) is selected.
  • Check if the batteries are installed correctly and are not depleted. Replace if necessary.
  • Try programming the remote again using a different code from the code library for your device.
Кээ бир баскычтар иштейт, бирок башкалары иштебейт.
  • This may indicate that the code entered is partially compatible. Try other codes for your device.
  • Some advanced functions may not be supported by all devices or may require specific setup.
The red indicator light does not turn on.
  • Батареянын орнотулушун текшерип, керек болсо батарейкаларды алмаштырыңыз.

Техникалык шарттар

GE Universal Remote Control with dimensions indicated

The remote control shown with its approximate dimensions: 5.5 inches in length, 1.81 inches in width, and 0.75 inches in thickness.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation included with your product or visit the official GE Universal Remote website. You can also find additional support and FAQs online.

Расмий колдонуучу колдонмо (PDF): PDF жүктөп алуу

Тектеш документтер - 24991

Preview Centricity Universal Viewer Zero Footprint (ZFP) DICOM Conformance Statement
This DICOM Conformance Statement for General Electric's Centricity Universal Viewer Zero Footprint (ZFP) details its compliance with DICOM standards for medical imaging data exchange, including supported SOP classes and network features. It serves as a technical guide for integration with PACS and other healthcare IT systems.
Preview GE Universal Remote Control (Model 24991) - Instruction Manual
User manual for the GE Universal Remote Control, model 24991, by Jasco Products Company. This guide provides instructions on setup, programming (Direct Code Entry, Auto Code Search), button functions, and features for controlling TVs, VCRs, DVDs, CBL, and SAT devices.
Preview GE Universal Remote Instruction Manual - Setup, Programming, and Use
Comprehensive guide to programming and using the GE Universal Remote Control (Model 24991). This manual covers button functions, direct code entry, auto code search, master volume, troubleshooting, and warranty information for controlling your TV, VCR, DVD, and other devices.
Preview GE 24991 универсалдуу алыстан көрсөтмө куралы
Comprehensive guide for the GE 24991 Universal Remote Control, covering setup, programming codes via direct entry or code search, button functions, troubleshooting, and warranty information.
Preview GE Universal Remote Instruction Manual - Орнотуу жана иштетүү боюнча колдонмо
GE универсалдуу алыстан башкаруу үчүн комплекстүү нускама колдонмосу (Модель 24991). Телевизорлор, видеомагнитофондор, DVD'лер, CBL жана SAT системалары сыяктуу бир нече аудио/видео түзмөктөрдү башкаруу үчүн пультуңузду кантип оңой орнотууну, программалоону жана башкарууну үйрөнүңүз.
Preview TCL Roku TV Remote коддору: Кабелиңизди же спутниктик пультуңузду программалаңыз
Кабелиңизди, спутникиңизди же универсалдуу пультуңузду программалоо үчүн TCL Roku TV үчүн алыскы коддорду табыңыз. Ар кандай провайдерлерге, анын ичинде AT&T, Comcast, DIRECTV жана башкалар менен шайкеш келет. Пультуңузду негизги жана кеңейтилген функциялар үчүн кантип орнотууну үйрөнүңүз.