1. Киришүү
This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your REED MC2 Mini Tubing Cutter. Please read this manual thoroughly before operating the tool.
The REED MC2 Mini Tubing Cutter is designed for cutting copper, steel, stainless steel, and aluminum tubing in extremely tight spaces. Its compact design requires only 1-11/16 inches of swing clearance around the tubing, making it ideal for confined applications.
2. Коопсуздук маалыматы
Кол аспаптарын колдонууда ар дайым негизги коопсуздук чараларын сактаңыз. Муну аткарбоо жаракат алууга же аспаптын же даярдалган бөлүктүн бузулушуна алып келиши мүмкүн.
- Көздү коргоо: Учуучу таштандылардан коргонуу үчүн ар дайым тиешелүү көз коргоочу каражаттарды тагыныңыз.
- Колду коргоо: Consider wearing gloves to protect hands from sharp edges of cut tubing.
- Туруктуу даяр бөлүк: Ensure the tubing is securely held and stable before cutting.
- Текшерүү куралы: Before each use, inspect the cutter wheel for damage or dullness. A dull wheel can cause uneven cuts or tool damage.
- Туура колдонуу: Use the tool only for its intended purpose of cutting tubing within its specified capacity.
3. Продукт бүтүп калдыview
The REED MC2 Mini Tubing Cutter is a robust, compact tool designed for precision cutting in limited access areas. It features a durable body, a sharp cutting wheel, and a knurled feed screw for adjustment.
Image: A compact silver-colored tubing cutter with a black knurled adjustment knob and a cutting wheel visible. The REED logo is embossed on the side.
Негизги өзгөчөлүктөрү:
- Компакт дизайн: Ideal for use in extremely tight spaces.
- Minimal Swing Clearance: Requires only 1-11/16 inches (43mm) of swing clearance.
- Ар тараптуу материалдык шайкештик: Suitable for cutting copper, steel, stainless steel, and aluminum tubing.
- Эргономикалык кармагыч: Features rounded corners and edges for comfortable handling during rotation.
- Сыйымдуулугу: Cuts tubing from 1/8 inch to 15/16 inch (3mm to 24mm).
4. Иштөө нускамалары
Follow these steps for effective and safe tubing cutting:
- Түтүктөрдү даярдоо: Ensure the tubing is clean and free of burrs or obstructions at the intended cut point.
- Open Cutter: kn айлантыңызurled feed screw counter-clockwise to open the cutter jaws sufficiently to place the tubing.
- Position Tubing: Place the tubing between the rollers and the cutting wheel. Ensure the cutting wheel aligns with the desired cut line.
- Алгачкы бекемдөө: Rotate the feed screw clockwise until the cutting wheel makes light contact with the tubing. Do not overtighten initially.
- First Rotation: Rotate the cutter completely around the tubing, ensuring the wheel scores a clean line.
- Акырындык менен бекемдөө: After each full rotation, tighten the feed screw clockwise by approximately a quarter to a half turn.
- Кайталоо: Continue rotating the cutter and gradually tightening the feed screw until the tubing is completely cut through. Apply steady, even pressure.
- Оңдоо: After cutting, use a deburring tool (not included) to remove any internal or external burrs from the cut edge of the tubing.
Маанилүү: Avoid excessive tightening of the feed screw between rotations, as this can deform the tubing, cause uneven cuts, or damage the cutting wheel.
5. Техникалык тейлөө
Proper maintenance ensures the longevity and performance of your REED MC2 Mini Tubing Cutter.
- Тазалоо: After each use, wipe down the cutter with a clean, dry cloth to remove any metal shavings or debris.
- Майлоо: Periodically apply a small amount of light machine oil to the feed screw threads to ensure smooth operation.
- Cutter Wheel Inspection: Regularly inspect the cutting wheel for signs of wear, chips, or dullness. A sharp wheel is crucial for clean cuts.
- Cutter Wheel Replacement: If the wheel is dull or damaged, replace it with a genuine REED replacement wheel. To replace, remove the pin holding the wheel in place, swap the wheel, and reinsert the pin securely.
- Сактагыч: Store the cutter in a dry place to prevent rust and corrosion.
6. Кыйынчылыктарды
If you encounter issues with your tubing cutter, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Uneven or spiraling cut | Excessive tightening per rotation; dull cutting wheel; uneven pressure. | Tighten feed screw gradually (quarter to half turn per rotation). Replace dull cutting wheel. Apply even pressure during rotation. |
| Difficulty cutting or slow progress | Dull cutting wheel; insufficient pressure; incorrect tool for material. | Replace cutting wheel. Ensure sufficient, but not excessive, pressure is applied. Verify tubing material is within tool's capacity. |
| Cutter not advancing smoothly | Dirty or unlubricated feed screw; damaged threads. | Clean and lubricate the feed screw. If threads are damaged, the tool may require professional repair or replacement. |
| Tubing deforms during cutting | Excessive tightening of the feed screw. | Reduce the amount of tightening per rotation. Apply lighter, more consistent pressure. |
7. Техникалык шарттар
- Модел: MC2
- Кесүү кубаттуулугу: 1/8" to 15/16" (3mm to 24mm)
- Minimum Swing Clearance: 1-11/16 дюйм (43мм)
- Шайкеш материалдар: Copper, Steel, Stainless Steel, Aluminum Tubing
- Элемент Салмагы: Болжол менен 4.8 унция
- Продукциянын өлчөмдөрү: Болжол менен 3 x 2 x 1 дюйм
- Өндүрүүчү: REED Manufacturing (Distributed by Standard Plumbing Supply)
8. Кепилдик жана колдоо
For information regarding the product warranty, please refer to the official REED Manufacturing webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдиктин шарттары жана шарттары ар кандай болушу мүмкүн.
If you require further assistance, have questions about operation, or need to order replacement parts, please contact REED customer support:
- REED Manufacturing Webсайт: www.reedmfgco.com (Please check for the most current contact information)
- Кардарларды тейлөө: караңыз website for phone numbers or email contacts.
