DaVinci M4799 Twin/Full Size Bed Conversion Kit Instruction Manual

1. Киришүү

This instruction manual provides essential information for the safe and proper assembly, use, and maintenance of your DaVinci M4799 Twin/Full Size Bed Conversion Kit. This kit is designed to convert compatible DaVinci cribs into a full-size bed or mini cribs into a twin-size bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The DaVinci M4799 Conversion Kit is crafted from 100% sustainable New Zealand pine wood and finished with a non-toxic, multi-step painting process that is lead and phthalate safe.

Сүрөттүн сүрөттөлүшү: A diagram illustrating the conversion possibilities. A full-size crib is shown converting into a full-size bed, and a mini crib is shown converting into a twin-size bed. This visually clarifies the purpose of the conversion kit.

2. Коопсуздук маалыматы

• Always follow all assembly instructions precisely. Incorrect assembly can lead to instability and potential hazards.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
• This conversion kit is designed for use with specific DaVinci crib models only. Refer to the compatibility section for a list of compatible models.
• The maximum weight recommendation for the converted bed is 500 pounds. Do not exceed this limit.
• Mattress and box spring (or slats) are sold separately and are required for proper use of the converted bed. Ensure they fit securely within the bed frame.
• Чогуу учурунда муунуп калуу коркунучун болтурбоо үчүн кичинекей бөлүктөрүн балдардан алыс кармаңыз.
• Do not use this product if any parts are missing, damaged, or broken. Contact customer support for replacement parts.

3. Пакеттин мазмуну

Монтаждоону баштоодон мурун бардык компоненттердин бар экендигин текшериңиз:

• 1 Pair of Twin/Full Conversion Rails (M4799) - Espresso
• Required assembly hardware (bolts, barrel nuts, etc.)

Сүрөттүн сүрөттөлүшү: А ачык view of the two wooden conversion rails included in the kit, laid flat against a white background. The rails are in an espresso finish.

4. Шайкештик

This DaVinci M4799 Twin/Full Size Bed Conversion Kit is compatible with the following DaVinci crib models:

• Anastasia (M7801)
• Emily (M4791)
• Jamie (M7301)
• Kalani (M5501)
• Richmond Crib (M2401)
• Annabelle Mini Crib (M5998)
• Emily Mini Crib (M4798)
• Kalani Mini Crib (M5598)
• Kalani Crib and Changer (M5591)
• Elizabeth II Toddler Bed (M0810)

Маанилүү: Using this kit with non-listed models may result in improper fit, instability, and potential safety hazards.

5. Орнотуу жана монтаждоо нускамалары

Before you begin, ensure you have adequate space and the necessary tools (e.g., screwdriver, Allen wrench, and potentially a drill if your crib's headboard/footboard holes are not pre-drilled all the way through).

1. Prepare Your Crib: Disassemble your compatible DaVinci crib by carefully removing the existing side rails. Retain the headboard and footboard, as these will form the ends of your new bed.
2. Темир жол багытын аныктоо: The conversion rails have specific ends designed to connect to the headboard and footboard. Ensure you orient them correctly.
3. Attach Rails to Headboard: Align one end of a conversion rail with the pre-drilled holes on the headboard of your crib. Insert the provided bolts through the rail and into the headboard, securing them with barrel nuts or other specified hardware. Tighten securely, but do not overtighten.
4. Potential Drilling Requirement: Some crib headboards/footboards may have pilot holes that do not go all the way through. If the hardware does not easily pass through, you may need to carefully drill through the existing pilot holes on your headboard and footboard to allow the bolts to pass through and connect to the barrel nuts. Use a drill bit size appropriate for the hardware.
5. Attach Rails to Footboard: Repeat the process for the other end of the conversion rails, attaching them to the footboard. Ensure the bed frame is square and stable.
6. Install Mattress Support (Sold Separately): This kit provides the side rails only. You will need to purchase and install a separate mattress support system, such as wooden slats or a box spring, to support your mattress. Ensure the chosen support system fits securely within the assembled bed frame.
7. Орун матрасы: Once the mattress support is in place, carefully position your twin or full-size mattress onto the support.
8. Акыркы текшерүү: Before use, double-check all connections to ensure they are tight and secure. Verify the bed is stable and level.

Сүрөттүн сүрөттөлүшү: A fully assembled full-size bed using the DaVinci conversion rails, with a crib headboard and footboard, and a white mattress and bedding. This shows the final appearance after conversion.

6. Иштөө нускамалары (колдонуу)

Once assembled, the converted bed functions as a standard twin or full-size bed, depending on the original crib size. It is designed to accommodate a standard twin or full-size mattress and a corresponding box spring or slat system (sold separately).

• Ensure the mattress is properly seated on the support system.
• Төшөктүн бошоп калган жабдыктарын же эскирүү белгилерин үзгүлтүксүз текшерип туруңуз.
• Do not allow jumping on the bed, as this can stress the frame and connections.

Сүрөттүн сүрөттөлүшү: Мурункуample of a DaVinci crib converted into a twin-size bed, complete with a blue mattress and bedding. The original crib headboard and footboard are used as the bed ends.

7. Техникалык тейлөө жана кам көрүү

• Тазалоо: Wipe the wooden surfaces with a damp кездеме. Абразивдүү тазалагычтарды же катуу химиялык заттарды колдонуудан алыс болуңуз, анткени алар финишке зыян келтириши мүмкүн.
• Текшерүү: Periodically inspect all hardware and structural components for tightness, wear, or damage. Re-tighten any loose bolts.
• Сактагыч: If disassembling for storage, keep all hardware in a secure bag and store the rails in a dry, temperature-controlled environment to prevent warping or damage.

8. Кыйынчылыктарды

• Rails do not align with crib ends: Double-check that your crib model is listed in the compatibility section. Ensure the rails are oriented correctly.
• Hardware does not fit or go through holes: Verify you are using the correct hardware for each connection. Some crib headboards/footboards may require drilling through existing pilot holes to allow bolts to pass through completely (refer to Section 5, Step 4).
• Төшөк туруксуз сезилет: Ensure all bolts are securely tightened. Check that the bed frame is square. Verify that the mattress support (slats or box spring) is properly installed and provides adequate stability.
• Жоголгон же бузулган бөлүктөр: Do not attempt to use the kit with missing or damaged parts. Contact DaVinci customer support for assistance.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information, replacement parts, or any questions regarding your DaVinci M4799 Twin/Full Size Bed Conversion Kit, please contact DaVinci customer support directly. Refer to the product packaging or the official DaVinci webакыркы байланыш маалыматы үчүн сайт.

Please have your model number (M4799Q) and proof of purchase available when contacting support.