Kicker 48KXMA8008 KXMA800.8 8-Channel Full-Range Class-D Marine Ampliifier Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Kicker 48KXMA8008 KXMA800.8 8-Channel Full-Range Class-D Marine Amplifier. Please read this manual thoroughly before attempting installation or operation to ensure proper function and safety.

Коопсуздук маалыматы

Жаракат алуунун же бузулуунун алдын алуу үчүн төмөнкү коопсуздук чараларын сактаңыз ampкөтөргүч же унаа:

• Always disconnect the vehicle's battery negative terminal before installing or servicing any audio components.
• Бардык зымдар туура жолго коюлганын жана чымчылып же бузулушун алдын алуу үчүн бекемделгенин текшериңиз.
• Use appropriate gauge wiring for power and ground connections to prevent overheating.
• орнотуудан качыңыз ampтүз күн нуру, ашыкча ысык же нымдуулукка дуушар болгон жерлерде liifier.
• If you are unsure about any part of the installation process, consult a professional installer.

Продукт бүттүview

Негизги өзгөчөлүктөрү

• Conformal-Coated Circuit Boards to Repel Moisture
• 316L Stainless-Steel, No-Rust Hardware
• Small Footprint for Flexible Placement
• Built-In Variable Crossovers for Precise Speaker Performance Matching
• Designed for High-End Tower Speakers or to Augment Existing Systems

Компоненттин идентификациясы

Familiarize yourself with the various parts of your Kicker KXMA800.8 ampөмүр берүүчү:

1-сүрөт: Жогорку view of the Kicker KXMA800.8 amplifier, showing the KICKER logo and model number.

2-сүрөт: Rear panel of the Kicker KXMA800.8 amplifier, detailing power, ground, remote, and RCA input connections for eight channels.

3-сүрөт: Front panel of the Kicker KXMA800.8 amplifier, displaying the gain, crossover, and Kick EQ controls for each ampөмүр бөлүмү.

4-сүрөт: Side view of the Kicker KXMA800.8 amplifier, featuring the illuminated "KX" logo.

Орнотуу жана орнотуу

Монтаждоо

The Kicker KXMA800.8 amplifier is designed for marine environments and can be mounted on boats or boards. Choose a location that is:

• Коопсуз жана туруктуу, кыймылдуу бөлүктөрдөн алыс.
• Protected from direct water spray, though the unit features conformal-coated circuit boards for moisture resistance.
• Accessible for wiring and adjustments, but also discreet if preferred due to its small footprint.
• Allows for adequate ventilation around the ampысып кетүүнүн алдын алуу үчүн көтөргүч.

Use the provided stainless-steel hardware for mounting. Ensure the mounting surface is strong enough to support the ampкөтөргүчтүн салмагы.

Зымдарды туташтыруу

Refer to Figure 2 for the location of all wiring terminals. Proper wiring is crucial for performance and safety.

1. Кубат (BATT +12V): Connect a direct wire from the positive terminal of your vehicle's battery. Install an appropriate fuse (not included) within 18 inches of the battery.
2. Жер (GND): Connect a wire of the same gauge as the power wire to a clean, solid metal chassis point. Ensure good electrical contact.
3. Алыстан күйгүзүү (REM): Connect this to the remote turn-on lead from your head unit or other signal source.
4. RCA Inputs (AMP1, AMP2, AMP3, AMP4): Connect your audio source (head unit) to these inputs using high-quality RCA cables. The amplifier supports 8 channels, typically using four stereo RCA pairs.
5. Динамиктин чыгышы: Connect your speakers to the designated speaker terminals. Pay close attention to polarity (+/-) for each speaker. The amplifier supports bridging for higher power output to specific channels; refer to the wiring diagram for bridging instructions.

Important: Before making any connections, ensure the vehicle's battery is disconnected.

Иштөө нускамалары

The KXMA800.8 amplifier features various controls to optimize audio performance. These controls are located on the front panel (refer to Figure 3).

5-сүрөт: Деталдаштырылган view of the gain, crossover, and Kick EQ adjustment knobs on the ampкөтөргүчтүн башкаруу панели.

Башкаруу

The Gain control matches the ampсиздин баштапкы бирдигиңиздин чыгуу деңгээлине көтөргүчтүн киргизүү сезгичтиги. Пайданы орнотуу үчүн:

1. Turn the gain knob all the way down (counter-clockwise).
2. Turn your source unit up to about 75% of its maximum volume.
3. Акырындык менен буруңуз amplifier's gain knob up until you hear slight distortion, then back it down slightly.
4. The "Gain Match" indicator (if present, refer to Figure 5) can assist in setting the optimal gain level.

Crossover Controls (OFF/HP/LP/BP)

The built-in variable crossovers allow you to filter frequencies sent to your speakers, optimizing their performance and protecting them from damaging frequencies.

• ӨЧҮК: Disables the crossover.
• HP (High-Pass): Allows only frequencies above the set point to pass through. Useful for full-range speakers or tweeters.
• LP (Low-Pass): Allows only frequencies below the set point to pass through. Useful for subwoofers.
• BP (Band-Pass): Allows frequencies within a specific range (between HP and LP settings) to pass through.

Adjust the frequency knobs (FREQ) to select the desired crossover point for each ampөмүр бөлүмү.

Kick EQ

The Kick EQ provides a bass boost feature. Use this control sparingly and adjust it carefully to avoid distortion or speaker damage. Start with the control at its minimum setting and increase gradually if desired.

Техникалык тейлөө

Your Kicker KXMA800.8 amplifier requires minimal maintenance to ensure long-lasting performance:

• Тазалоо: Мезгил-мезгили менен сүртүп туруңуз ampliifier сыртын жумшак, кургак чүпүрөк менен. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз.
• Байланыштары: Occasionally check all wiring connections to ensure they are secure and free from corrosion, especially in marine environments.
• Вентиляция: камсыз кылуу ampКөтөргүчтүн муздатуучу канаттары жылуулуктун тийиштүү түрдө таркалышын камсыз кылуу үчүн тоскоолдуктардан тазаланган.

Проблемаларды чечүү

Эгер сиз менен көйгөйлөр пайда болсо amplifier, consult the following table before contacting support:

Техникалык шарттар

Кепилдик жана колдоо

Kicker products are engineered for reliable performance. For specific warranty information, including coverage duration and terms, please refer to the official Kicker website or contact Kicker customer support directly. Keep your purchase receipt as proof of purchase.

For technical assistance or further inquiries, please visit the official Kicker support page or contact their customer service department.