Furman M-8Lx Standard Level Power Conditioner User Manual

1. Киришүү

The Furman M-8Lx Standard Level Power Conditioner is designed to protect your valuable electronic equipment from power surges and spikes, while also filtering out AC line noise that can degrade audio and video performance. It features a 15 Amp capacity, nine outlets (eight rear, one front), and two retractable incandescent front-panel light fixtures with dimmer control for convenient rack illumination.

Please read this manual thoroughly before installing and operating your M-8Lx unit to ensure proper use and to maximize its performance and longevity.

Маанилүү коопсуздук маалыматы

• Always connect the M-8Lx to a grounded 120V AC power outlet.
• Агрегатты жамгырга же нымдуулукка дуушар кылбаңыз.
• Do not remove the cover. Refer all servicing to qualified service personnel.
• Агрегаттын айланасында жетиштүү желдетүүнү камсыз кылыңыз.

2. Пакеттин мазмуну

Пакетиңизде төмөнкү заттар бар экенин текшериңиз:

• Furman M-8Lx Standard Level Power Conditioner
• Интеграцияланган AC кубат шнуру

3. Продукт бүтүп калдыview

Алдыңкы панелдин өзгөчөлүктөрү

The front panel of the M-8Lx provides essential controls and indicators for operation.

Сүрөт: алдыңкы view of the Furman M-8Lx Standard Level Power Conditioner, showing the switched outlet, light dimmer, protection indicator, and power switch.

• Которуучу розетка: A single convenience outlet on the front panel for temporary connections.
• Жарыктар: Two retractable incandescent light fixtures for illuminating rack equipment.
• Dimmer Control: A rotary knob to adjust the brightness of the pullout lights.
• Protection OK Indicator: A green LED that illuminates when the unit's surge protection circuitry is functioning correctly.
• Кубат которгучу: Controls the main power to all connected outlets.

Арткы панелдин өзгөчөлүктөрү

The rear panel houses the primary power outlets and the main power input.

• Eight Switched Outlets: Standard AC outlets for connecting your equipment. These are controlled by the front panel power switch.
• AC кубаттуулугун киргизүү: The integrated power cord connects here to your wall outlet.
• Ажыраткыч: A resettable circuit breaker protects against overloads.

4. Орнотуу

Стойкага орнотуу

The M-8Lx is designed for standard 19-inch equipment racks. Secure the unit using four rack screws (not included) through the mounting holes on the front panel. Ensure the unit is firmly seated in the rack.

Power Connection

1. Ensure the M-8Lx power switch is in the OFF position.
2. Plug the integrated AC power cord from the M-8Lx into a properly grounded 120V AC wall outlet.

Туташтыруучу жабдуулар

1. With the M-8Lx power switch OFF, connect your electronic equipment (amplifiers, mixers, etc.) to the eight switched outlets on the rear panel.
2. The front panel switched outlet can be used for temporary connections or devices requiring easy access.
3. Ensure that the total current draw of all connected equipment does not exceed the M-8Lx's 15 Amp рейтинг.

5. Иштөө нускамалары

Күйгүзүү/өчүрүү

Press the front panel power switch to the ON position to supply power to all connected outlets. Press it again to the OFF position to cut power.

Using the Pullout Lights

1. Gently pull out the two light fixtures from the front panel until they are fully extended.
2. Rotate the Dimmer Control knob to adjust the brightness of the lights to your desired level.
3. To turn off the lights, push them back into the unit. The dimmer control does not have a full 'off' position for the lights when extended.

Protection OK Indicator

The green 'Protection OK' LED on the front panel indicates that the M-8Lx's surge suppression circuitry is active and providing protection. If this LED is not illuminated, the protection circuitry may have been compromised, and the unit should be serviced.

6. Техникалык тейлөө

Тазалоо

To clean the unit, disconnect it from the power source and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.

Автоматтык өчүргүчтү баштапкы абалга келтирүү

If the M-8Lx experiences an overload (e.g., too many devices drawing excessive current), the rear panel circuit breaker may trip, cutting power to the outlets. To reset, disconnect some equipment, then push the circuit breaker button back in. If it trips repeatedly, reduce the load or investigate the connected equipment for faults.

7. Кыйынчылыктарды

• Розеткаларга электр кубаты жок:
  • Ensure the M-8Lx is plugged into a live wall outlet.
  • Check if the front panel power switch is in the ON position.
  • Verify the rear panel circuit breaker has not tripped. Reset if necessary.
• Pullout Lights Not Working:
  • Ensure the lights are fully extended.
  • Adjust the Dimmer Control knob.
  • Check if the main power switch is ON.
• Protection OK Indicator is Off:
  • This indicates the surge protection may be compromised. The unit will still pass power, but without surge protection. Contact Furman support for service.
• Audible Noise or Hum:
  • While the M-8Lx filters AC line noise, some noise can originate from other sources. Ensure all audio equipment is properly grounded and interconnected.
  • Test equipment directly into a wall outlet to isolate the source of the noise.

8. Техникалык шарттар

9. Кепилдик маалыматы

The Furman M-8Lx is covered by a manufacturer's limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Furman webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

10. Колдоо маалыматы

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Furman customer support. Contact information can typically be found on the official Furman webсайтында же продуктунун таңгагында.

Webсайт: www.furmanpower.com