Introduction
This manual provides essential instructions for the safe and efficient use of your Metabo 6" GW ZA24-T (MAX-Z) accessory. Please read this manual thoroughly before initial operation to ensure proper handling, maximize product lifespan, and prevent injury.
Image: Metabo professionals demonstrating the use of power tools, including a grinding application.
Жалпы коопсуздук маалыматы
Always adhere to general power tool safety warnings and instructions provided with your power tool. This accessory is designed for specific applications; improper use can lead to serious injury. Keep this manual for future reference.
- Көздү коргоочу каражаттарды, угууну коргоочу каражаттарды, кол каптарды жана чаңдан коргоочу масканы камтыган тиешелүү жеке коргонуу каражаттарын (ЖКК) кийиңиз.
- Ensure the accessory is correctly mounted and secured before operation.
- Inspect the accessory for damage or wear before each use. Do not use damaged accessories.
- Maintain a firm grip on the power tool and keep bystanders at a safe distance.
- Кошумча жабдууларды алмаштыруудан же техникалык тейлөөдөн мурун электр куралын кубат булагынан ажыратыңыз.
Орнотуу жана орнотуу
- Даярдоо: Ensure your power tool is unplugged or its battery removed. Clean the spindle and mounting surfaces of the power tool.
- Аксессуарларды текшерүү: Visually inspect the 6" GW ZA24-T (MAX-Z) accessory for any cracks, chips, or deformities. Do not use if damaged.
- Монтаждоо: Place the accessory onto the power tool's spindle, ensuring it sits flush against the inner flange. Secure it with the outer flange and tightening nut, following your power tool's specific instructions for tightening torque.
- Сактоочу жөндөө: Adjust the safety guard on your power tool to provide maximum protection for the specific application, ensuring it covers as much of the accessory as possible while allowing for work.
- Сыноо: Before applying to a workpiece, run the power tool at operating speed for approximately 30 seconds in a safe, clear area to check for excessive vibration or imbalance.
Иштөө нускамалары
The Metabo 6" GW ZA24-T (MAX-Z) is designed for specific grinding or cutting applications. Always operate within the recommended RPM range of your power tool and the accessory's maximum RPM rating.
- Жумушчу бөлүгүн камсыздоо: Иштеп жаткан учурда кыймылга жол бербөө үчүн даярдоо бөлүгүн ар дайым бекем бекитиңиз.
- Баштоо: Allow the accessory to reach full operating speed before making contact with the workpiece.
- Колдонмо: Apply steady, moderate pressure. Avoid excessive force, which can cause the accessory to bind, break, or overheat.
- Багыты: Work in a direction that directs sparks and debris away from yourself and others.
- Муздатуу: For prolonged use, allow the accessory to cool periodically to prevent overheating and premature wear.
Тейлөө жана сактоо
- Тазалоо: After each use, clean the accessory and power tool to remove dust and debris. Use a brush or compressed air.
- Текшерүү: Regularly inspect the accessory for signs of wear, cracks, or damage. Replace worn or damaged accessories immediately.
- Сактагыч: Store the accessory in a dry, cool place, away from direct sunlight and moisture. Keep it in its original packaging or a protective container to prevent damage.
- Жоюу: Dispose of worn or broken accessories according to local regulations.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Ашыкча титирөө | Improper mounting, damaged accessory, unbalanced accessory. | Re-mount accessory, inspect for damage and replace if necessary, ensure flanges are clean. |
| Poor Performance/Slow Material Removal | Worn accessory, incorrect accessory for material, insufficient power tool speed. | Replace accessory, verify accessory suitability, check power tool settings. |
| Accessory Overheating | Excessive pressure, prolonged use without cooling, incorrect accessory. | Reduce pressure, allow accessory to cool, ensure correct accessory for application. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 655787000 |
| Description | 6" GW ZA24-T (MAX-Z) |
| Бренд | Metabo |
| UPC | 662911557877 |
| Стиль | Компакт |
Кепилдик жана колдоо
For detailed warranty information, please refer to the documentation included with your original power tool or visit the official Metabo website. Metabo stands behind the quality of its products.
For technical support, replacement parts, or further assistance, please contact Metabo customer service or visit their official store:
