1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of the Raritan Dominion Kx II CIM (Computer Interface Module) with Dual USB Port and Virtual Media capabilities. This device is designed to connect a server to a Raritan Dominion KVM switch, enabling remote access and control, including BIOS-level access and virtual media support.
1-сүрөт: Raritan Dominion Kx II CIM Dual USB Port with Virtual Media. This image shows the blue-colored CIM module with an RJ-45 port on one end and a VGA connector with two USB Type-A connectors on the other, connected by a black cable.
2. Коопсуздук маалыматы
Please read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the equipment.
- Ensure all power is disconnected from the server and KVM switch before connecting or disconnecting the CIM.
- Белгиленген кабелдерди жана аксессуарларды гана колдонуңуз.
- Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
- Бул аппарат имараттын ичинде гана колдонууга арналган.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- 1 x Raritan Dominion Kx II CIM Dual USB Port with Virtual Media (Model D2CIM-DVUSB)
4. Орнотуу
Follow these steps to connect the CIM to your server and KVM switch:
- Өчүрүү: Ensure the server and the Raritan Dominion KVM switch are powered off before making any connections.
- Connect to Server:
- Connect the 15-pin HD-15 Male Video connector of the CIM to the VGA port on your server.
- Connect the two Type A Male USB connectors of the CIM to available USB ports on your server. These connections provide keyboard, mouse, and virtual media functionality.
- Connect to KVM Switch: Connect a standard Cat 5e (or higher) Ethernet cable from the RJ-45 Female Network port on the CIM to an available CIM port on your Raritan Dominion KVM switch.
- Күйгүзүү: Once all connections are secure, power on the Raritan Dominion KVM switch, then power on the server.
The CIM will be automatically detected by the KVM switch.
5. Иштөө нускамалары
The Raritan Dominion Kx II CIM enables remote access and control of your connected server through the KVM switch. Key functionalities include:
- Remote KVM Access: Use the KVM switch's interface to select and control the connected server. This includes full keyboard, video, and mouse (KVM) functionality.
- BIOS-Level Access: The CIM provides access to the server's BIOS, allowing for configuration changes and troubleshooting at a fundamental level.
- Виртуалдык медиа: The dual USB connection supports virtual media, allowing you to mount ISO images or other storage devices from your remote workstation to the connected server. This is particularly useful for operating system installations, software updates, and diagnostics without physically being at the server.
Refer to your Raritan Dominion KVM switch's user manual for detailed instructions on navigating the KVM interface and utilizing virtual media features.
6. Техникалык тейлөө
The Raritan Dominion Kx II CIM is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:
- Тазалоо: Use a soft, dry cloth to clean the exterior of the CIM. Do not use liquid cleaners or aerosols.
- Кабелдик башкаруу: Ensure cables are not kinked or excessively bent to prevent damage.
- Экологиялык шарттар: Operate the device within specified indoor environmental conditions to prevent overheating or damage from moisture.
7. Кыйынчылыктарды
If you encounter issues with your Raritan Dominion Kx II CIM, consider the following:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No video display from server. | VGA cable not securely connected. | Ensure the 15-pin HD-15 connector is firmly seated in the server's VGA port. |
| Клавиатура/Чычкан жооп бербей жатат. | USB cables not connected or faulty. | Verify both USB Type A connectors are securely plugged into the server's USB ports. Try different USB ports. |
| CIM not detected by KVM switch. | RJ-45 cable issue or KVM port problem. | Check the Cat 5e Ethernet cable connection between the CIM and the KVM switch. Try a different port on the KVM or a different cable. Ensure KVM switch is powered on. |
| Virtual Media not functioning. | USB connection issue or KVM software configuration. | Confirm USB connections are active. Refer to your KVM switch's manual for virtual media setup and troubleshooting. |
For further assistance, contact Raritan technical support.
8. Техникалык шарттар
| Модель аты | D2CIM-DVUSB |
| Өндүрүүчү | RARITAN COMPUTER |
| Connector on First End | 1 x 15-pin HD-15 Male Video, 2 x Type A Male USB |
| Connector on Second End | 1 x RJ-45 Female Network |
| Кабель түрү | AUX |
| Ethernet кабелинин категориясы | Cat 5e |
| Шайкеш түзмөктөр | PC |
| Түс | Кара |
| Продукциянын өлчөмдөрү (L x W x Y) | 4.02 x 1.06 x 1.18 дюйм (болжол менен 10.21 x 2.69 x 3.00 см) |
| Элемент Салмагы | 4 унция (болжол менен 0.11 кг) |
| Ички/тышкы колдонуу | Indoor |
| UPC | 785813339508 |
9. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official Raritan webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Raritan Official Webсайт: www.raritan.com
