Introduction
Thank you for choosing the Strata Sankey Beehive Water Butt. This 150-liter rain barrel is designed to collect rainwater efficiently, contributing to sustainable water usage in your garden. Its unique beehive design offers an aesthetic appeal, blending seamlessly with various garden styles. Constructed from 100% recycled materials, with at least 75% post-consumer waste, this product reflects a commitment to environmental responsibility.
This manual provides essential information for the proper setup, operation, and maintenance of your water butt to ensure its longevity and optimal performance.
Figure 1: The Sankey Beehive Water Butt, showcasing its terracotta-like finish, black lid, and integrated tap.
Продукт өзгөчөлүктөрү
- Сыйымдуулугу: 150 liters for substantial rainwater collection.
- Толук комплект: Includes a secure lid and an integrated tap for easy water dispensing.
- Туруктуу курулуш: Lightweight, weather-resistant, and unbreakable design.
- Экологиялык жактан таза: Made from 100% recycled materials, with a minimum of 75% post-consumer waste.
- Эстетикалык дизайн: Beehive shape with a ceramic-like appearance to complement garden aesthetics.
- Шайкештик: Suitable for use with Sankey Premier stands and standard stands (sold separately).
- Connection Ready: Can be used with the separately available Sankey connection kit to divert rainwater from downpipes.
Орнотуу нускамалары
- Жайгашкан жерди тандаңыз: Select a flat, stable surface near a downpipe. Ensure the ground can support the weight of the water butt when full (approx. 150 kg).
- Install a Stand (Optional but Recommended): If using a stand (e.g., Sankey Premier stand), place it on the chosen flat surface. A stand elevates the water butt, allowing easier access to the tap and enabling filling of watering cans.
- Position the Water Butt: Carefully place the water butt onto the stand or directly on the ground. Ensure it is level and stable.
- Tap орнотуу: The water butt comes with a tap. Screw the tap securely into the pre-drilled hole at the bottom of the water butt. Ensure it is hand-tight to prevent leaks.
- Connect to Downpipe (Optional): To collect rainwater from your roof, you will need a rain diverter kit (e.g., Sankey connection kit, sold separately). Follow the instructions provided with the diverter kit to connect it to your downpipe and the water butt. This typically involves cutting a section of the downpipe and inserting the diverter, then connecting a hose from the diverter to an inlet on the water butt.
Сүрөт 2: Мурункуample of the water butt correctly installed on a stand and connected to a downpipe for rainwater collection.
Figure 3: Detail of the integrated tap, showing its position at the bottom for easy water access.
Иштөө нускамалары
Once installed, the Sankey Beehive Water Butt operates passively by collecting rainwater. If connected to a downpipe with a diverter, it will automatically fill during rainfall.
- Collecting Water: Ensure the lid is securely placed on top to prevent debris from entering and to minimize evaporation. The diverter kit (if installed) will direct water into the butt.
- Суу чыгаруу: To access the collected water, turn the tap handle to the 'OPEN' position. Place a watering can or bucket beneath the tap. Turn the handle back to the 'CLOSED' position to stop the flow.
- Толуп кетүү: If the water butt becomes full and a diverter is installed, excess water will typically be redirected back into the downpipe. If no diverter is used, ensure the water butt is placed in an area where overflow will not cause damage or inconvenience.
Figure 4: The water butt in a garden environment, ready for operation.
Техникалык тейлөө
- үзгүлтүксүз тазалоо: Periodically inspect the inside of the water butt for sediment or algae buildup. If necessary, empty the butt, remove the lid, and clean the interior with a brush and mild detergent. Rinse thoroughly.
- Tap Maintenance: Check the tap periodically for leaks or blockages. If the flow rate decreases, the tap may need cleaning.
- Капкактын коопсуздугу: Ensure the lid remains securely in place to prevent leaves, insects, and other debris from contaminating the water.
- Кыштоо: In freezing conditions, it is recommended to empty the water butt to prevent ice expansion from damaging the unit. Disconnect any diverter kits and store them if necessary.
5-сүрөт: Ички view of the water butt, illustrating the ribbed structure and the opening for cleaning and inspection.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Water butt not filling. |
|
|
| Tap leaking. |
|
|
| Slow water flow from tap. |
|
|
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | Strata |
| Модель номери | 1229 |
| Кубаттуулугу | 150 литр |
| Материал | 100% Recycled Plastic (min. 75% post-consumer waste) |
| Түс | Brown (Terracotta-like finish) |
| Өлчөмдөрү (H x W x D) | 77 x 60 x 60 см (болжол менен) |
| Элемент Салмагы | 4 кг |
| Форма | Round / Beehive |
| GTIN | 05012859012290 |
6-сүрөт: Детальдуу view of the water butt's surface texture.
Кепилдик жана колдоо
For specific warranty information and customer support, please refer to the manufacturer's official webсайтка же сатуучуга кайрылыңыз. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.
For general inquiries or further assistance, please visit the Fiskars Store on Amazon (Note: Fiskars is listed as a brand in specifications, while Strata is the manufacturer. This link is provided as it was in the original product data). Or contact Strata directly.
