Продукт бүттүview
The Walker 35017 Exhaust System Hanger Insulator is designed to provide reliable support for your vehicle's exhaust components. This insulator is crafted from high-quality materials to ensure durability and a long service life, effectively dampening vibrations and securing the exhaust system in place. It is engineered for compatibility with specific Toyota 4Runner and Lexus GX470 models, ensuring an OE-style fit and easy installation as part of a complete exhaust repair.
Image: The Walker 35017 Exhaust System Hanger Insulator, a black rubber component with multiple holes for mounting.
Орнотуу жана орнотуу
Proper installation of the exhaust hanger insulator is crucial for the longevity and performance of your exhaust system. Always ensure the vehicle is safely supported on a lift or jack stands before beginning any work under the vehicle. It is recommended to wear appropriate personal protective equipment, including safety glasses and gloves.
Шайкештикти текшерүү
Before installation, verify that the Walker 35017 insulator is the correct part for your vehicle. This insulator is compatible with:
- 2003-2003 Lexus GX470
- 2004-2004 Lexus GX470
- 2003-2003 Toyota 4Runner
- 2004-2004 Toyota 4Runner
- 2005-2005 Toyota 4Runner
- 2006-2006 Toyota 4Runner
- 2007-2007 Toyota 4Runner
- 2008-2008 Toyota 4Runner
- 2009-2009 Toyota 4Runner
- 2010-2010 Toyota 4Runner
Refer to your vehicle's service manual for specific exhaust system diagrams and hanger locations.
Орнотуу кадамдары
- Даярдоо: Ensure the exhaust system is cool to the touch. Locate the existing or intended mounting points for the hanger insulator.
- Removal (if replacing): If replacing an old insulator, use a specialized exhaust hanger removal tool or a pry bar to carefully detach the old insulator from the exhaust rod and vehicle mounting point. Lubrication may assist in removal.
- Орнотуу: Slide the new Walker 35017 insulator onto the exhaust system's hanger rod. Then, align the insulator with the vehicle's mounting stud or bracket and push it into place. Lubricating the holes of the insulator with a silicone-based lubricant can make installation easier.
- Камсыздандыруу: Ensure the insulator is fully seated on both the exhaust rod and the vehicle's mounting point, providing a snug and secure fit.
Image: A hand wearing a blue glove installing an exhaust hanger insulator onto a vehicle's exhaust system.
For optimal performance and a complete exhaust system upgrade, it is recommended to use premium Walker accessories when installing Walker catalytic converters and mufflers.
Image: Text 'BETTER TOGETHER' with a mechanic measuring an exhaust pipe, emphasizing the use of compatible Walker parts.
Иштөө принциби
The Walker 35017 Exhaust System Hanger Insulator functions as a critical component in supporting the vehicle's exhaust system. Its primary role is to absorb vibrations and movements generated by the engine and road conditions, preventing these from being transferred directly to the vehicle's chassis. This helps to reduce noise, prevent damage to exhaust pipes and catalytic converters, and maintain proper alignment of the exhaust system. The durable rubber construction ensures flexibility while providing firm support, allowing for slight movement of the exhaust system without causing undue stress or detachment.
Image: A diagram illustrating the various components of a vehicle's exhaust system, including manifold converters, oxygen sensor ports, catalytic converters, resonator assemblies, and mufflers.
Техникалык тейлөө
Exhaust hanger insulators are generally low-maintenance components. However, periodic inspection is recommended to ensure their continued effectiveness and prevent potential issues with the exhaust system.
Текшерүү графиги
- Inspect the insulators during routine oil changes or vehicle maintenance checks.
- Check immediately if you notice increased exhaust noise, rattling, or a change in the exhaust pipe's position.
Эмне издөө керек
- Cracks or Tears: Look for any visible cracks, tears, or signs of deterioration in the rubber material.
- Stretching or Sagging: Ensure the insulator is not excessively stretched or sagging, which could indicate wear or improper support.
- Secure Fit: Confirm that the insulator is still securely attached to both the exhaust rod and the vehicle's mounting point.
- Коррозия: Check surrounding metal components for rust or corrosion that could affect the hanger's integrity.
If any signs of wear or damage are observed, replace the insulator promptly to maintain proper exhaust system support and prevent further damage.
Image: Text 'PREMIUM MATERIALS' highlighting the durable construction of the insulator, with a close-up inset of the rubber material.
Проблемаларды чечүү
While exhaust hanger insulators are simple components, issues can arise if they fail or are improperly installed. Here are common problems and their potential solutions:
Жалпы маселелер жана чечимдер
- Rattling or Clunking Noise:
Себеби: Loose, worn, or broken insulator; exhaust pipe hitting the chassis.
Чечим: Inspect all exhaust hangers and insulators. Replace any that are damaged or no longer providing a secure fit. Ensure proper clearance between the exhaust pipe and vehicle components. - Exhaust Pipe Sagging or Misalignment:
Себеби: Failed insulator; incorrect insulator size or type.
Чечим: Replace the faulty insulator. Verify that the correct part number (Walker 35017) is used for your specific vehicle model. - Increased Vibration in Cabin:
Себеби: Insulator no longer effectively dampтермелүүлөр.
Чечим: Check insulators for hardening, cracking, or excessive wear. Replace if the rubber has lost its elasticity. - Difficulty Installing Insulator:
Себеби: Tight fit; lack of lubrication.
Чечим: Apply a silicone-based lubricant to the holes of the insulator and the metal rods/studs. Use an exhaust hanger installation tool if available.
Техникалык шарттар
Detailed specifications for the Walker 35017 Exhaust System Hanger Insulator:
| Атрибут | Нарк |
|---|---|
| Бренд | Уокер |
| Өндүрүүчү | Теннеко (Диномакс, Уокер, молочница) |
| Элемент моделинин номери | 35017 |
| Өндүрүүчү бөлүгүнүн номери | 35017 |
| Элемент Салмагы | 2.89 унция |
| Продукциянын өлчөмдөрү (L x W x Y) | 3.75 x 3 x 1.5 дюйм |
| Келип чыккан өлкө | Индия |
| UPC | 086387350174 |
Image: Text 'AVAILABLE IN DIFFERENT SIZES' showing three different shapes of Walker exhaust hanger insulators, indicating variety.
Кепилдик жана колдоо
For specific warranty information regarding your Walker 35017 Exhaust System Hanger Insulator, please refer to the documentation provided with your purchase or visit the official Walker webсайт. Кепилдик шарттары, адатта, өндүрүштүн кемчиликтерин жана нормалдуу колдонуудагы материалдык кемчиликтерди камтыйт.
Кардарларды колдоо
If you have questions about installation, compatibility, or require technical assistance, please contact Walker customer support through their official website or the contact information provided on your product packaging. When contacting support, please have your product model number (35017) and any relevant vehicle information readily available.
