KOHLER Salient 9053-0 60" x 30" Alcove чоюн душунун негизи үчүн колдонмо

Introduction

The KOHLER Salient 9053-0 60" x 30" Alcove Cast Iron Shower Base is designed for custom-tiled shower environments, offering durability and a spacious showering area. Its versatile design complements various bathroom decors.

Негизги өзгөчөлүктөрү:

• Spacious shower base for ample showering room.
• Safeguard slip-resistant finish for enhanced safety.
• Single threshold for alcove installation with three tile-in flanges.
• Equipped with a left drain.
• Constructed from durable KOHLER Cast Iron.

Орнотуу жана орнотуу

This section provides general guidelines for installing your KOHLER Salient shower base. Always refer to the detailed installation instructions included with your product for complete safety information, required tools, and specific steps.

Орнотууга чейинки текшерүүлөр:

• Ensure the subfloor is level and capable of fully supporting the shower base.
• Remove any packaging materials and inspect the shower base for damage.

Орнотуу кадамдары бүттүview:

1. Remove the cardboard installation block from the shower base and split it into two pieces.
2. Install the drain assembly to the shower base according to the drain manufacturer's instructions.
3. With assistance, carefully move the shower base into position within the shower area. Avoid dropping the base to prevent damage or injury.
4. Press one cardboard installation block onto each side of the front apron, to the inside of the front feet.
5. Carefully lower the shower base to the floor, ensuring it fits properly in the stud pocket.
6. Stand on the shower base to press through the installation blocks, ensuring a secure fit.
7. Remove and discard the exposed portions of the cardboard blocks.
8. Confirm the shower base is level. If necessary, use metal shims to ensure the base sits level.
9. Complete the installation by connecting the drain pipe, installing the finished wall, and installing the bathroom floor.
10. Record the information on the enamel label for future reference.

Иштөө нускамалары

Once installed, the KOHLER Salient shower base is ready for use. Ensure the drain is clear of debris before and after each use to maintain proper water flow.

• The Safeguard slip-resistant finish provides enhanced traction for safety during showering.
• Avoid using abrasive materials or harsh chemicals that could damage the enamel surface.

Кароо жана тейлөө

Proper care will help maintain the beauty and longevity of your KOHLER cast iron shower base.

Жалпы тазалоо:

• Clean the surface regularly with a soft sponge or cloth and a mild, non-abrasive cleaner.
• Тазалоочу каражаттын калдыктарын толугу менен кетирүү үчүн, тазалоодон кийин жылуу суу менен жакшылап чайкаңыз.
• Avoid using steel wool, wire brushes, or abrasive scouring pads, as these can scratch the enamel finish.
• Do not use harsh chemical cleaners, such as those containing ammonia, bleach, or strong acids, as they can damage the cast iron enamel.

Зыяндын алдын алуу:

• Avoid dropping heavy or sharp objects onto the shower base, which could chip or crack the enamel.
• Do not use the shower base as a cutting surface.
• For stubborn stains, consult KOHLER's official cleaning recommendations or contact customer support.

Проблемаларды чечүү

If you encounter any issues with your shower base, refer to the following common solutions:

• Жай дренаж: Check the drain for hair or soap buildup. Clear any obstructions. Ensure the drain pipe is correctly installed and free of blockages.
• Беттик тактар: For most stains, use a mild, non-abrasive cleaner. Avoid abrasive tools or harsh chemicals.
• Суу бассейни: Verify that the shower base was installed level. If not, shimming may be required (consult a professional if necessary).
• Сыныктар же жаракалар: Cast iron is highly durable, but extreme impact can cause damage. For significant damage, professional repair or replacement may be necessary. Contact KOHLER customer support for guidance.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалыматы:

This KOHLER Salient Cast Iron Shower Base is covered by the KOHLER чоюн өмүр бою чектелген кепилдик. Толук жоболор жана шарттар үчүн продуктуңузга кошулган кепилдик документтерин караңыз.

Кардарларды колдоо:

For technical assistance, parts, or warranty claims, please contact KOHLER Customer Support. Refer to the contact information provided in your product packaging or visit the official KOHLER webсайт.

Продукциянын визуалдык көрүнүштөрү жана маалыматы

Сүрөт: жогорудан төмөнгө view of the KOHLER Salient 60" x 30" white cast iron shower base, featuring the left-side drain and textured slip-resistant floor pattern.

Image: A diagram illustrating the superior qualities of KOHLER Enameled Cast Iron, emphasizing its ultra-thick enamel, strength, and durability compared to other enameled steel products.

Image: Technical drawing providing key dimensions of the KOHLER Salient 60" x 30" shower base, including length, width, and height.