Eiko DT50/35/RS

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb User Manual

Model: DT50/35/RS

1. Киришүү

This manual provides essential information for the safe and effective use of your Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. Please read these instructions carefully before installation and retain for future reference.

The Eiko DT50/35/RS is a 50-watt compact fluorescent (CFL) bulb, also referred to as a compact fluorescent halogen bulb, featuring a Duo-Tube design and a 2G11 base. It produces a 3500K cool white light with 4300 lumens brightness, suitable for various lighting applications.

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb

Figure 1: Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. This image shows the elongated, dual-tube design of the bulb with its 2G11 base at the bottom.

2. Коопсуздук нускамалары

WARNING: To prevent electric shock or burns, always turn off the power supply before installing or replacing the bulb.

  • Лампанын кубаттуулугуна ылайыкташтырылганын текшериңизtage (50W).
  • Эгерде шайкеш келүү жөнүндө ачык айтылбаса, диммерлер менен колдонбоңуз.
  • Handle the bulb by its base to avoid touching the glass, as oils from skin can reduce bulb life.
  • If the bulb breaks, ventilate the room and carefully clean up the broken glass and mercury according to local regulations.
  • Балдар жетпеген жерде сактаңыз.

3. Орнотуу жана орнотуу

  1. Кубатты өчүрүү: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker controlling the fixture.
  2. Эски лампочканы алып салуу (эгер бар болсо): If replacing an existing bulb, allow it to cool completely before carefully removing it from the fixture.
  3. Негизги түрүн аныктоо: Confirm your fixture uses a 2G11 base. The Eiko DT50/35/RS bulb has a 2G11 4-pin base.
  4. 2G11 Base Diagram

    Figure 2: Diagram of a 2G11 base. This illustration shows the four-pin configuration of the 2G11 lamp base, indicating its shape and pin arrangement for proper insertion.

  5. Жаңы лампочканы орнотуу: Align the four pins of the Eiko DT50/35/RS bulb with the corresponding slots in the fixture's 2G11 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
  6. Күчтү калыбына келтирүү: Once the bulb is securely installed, turn the circuit breaker back on, then turn on the light switch.

4. Иштөө нускамалары

The Eiko DT50/35/RS bulb operates like a standard fluorescent lamp. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • Initial Warm-up: Fluorescent bulbs may take a few moments to reach full brightness, especially in colder environments.
  • Күйгүзүү/Өчүрүү: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for longer periods when possible.

5. Техникалык тейлөө

  • Тазалоо: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
  • Алмаштыруу: Replace the bulb when it reaches the end of its life (flickering, dimming, or failure to light). Always turn off the power before replacing.
  • Жоюу: This compact fluorescent bulb contains a small amount of mercury. Dispose of it according to local, state, and federal regulations. Many retailers and municipalities offer recycling programs for CFLs. Do not dispose of in regular household trash.

6. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Лампочка күйбөйт.Шайманга күч жок.
Лампочка туура эмес орнотулган.
Bulb is faulty or at end of life.
Fixture ballast is faulty.
Электр өчүргүчтү жана өчүргүчтү текшериңиз.
Turn off power, re-seat bulb firmly.
Лампочканы алмаштырыңыз.
Квалификациялуу электрикке кайрылыңыз.
Лампочка жаркылдайт.Лампочка өмүрүнүн акырына жакындап калды.
Шайкеш келбеген диммер.
Бошоң байланыш.
Cold environment.
Лампочканы алмаштырыңыз.
Remove dimmer or replace with compatible bulb/fixture.
Turn off power, check bulb seating.
Allow time for warm-up.
Лампочка күңүрт.Лампочка өмүрүнүн акырына жакындап калды.
Туура эмес ватtage for fixture.
Лампочканы алмаштырыңыз.
Ensure fixture and bulb wattage дал келүү.

7. Техникалык шарттар

ӨзгөчөлүкДеталь
БрендЭйко
Модель номериDT50/35/RS
Жарык түрүCompact Fluorescent Halogen (CFL)
Ватtage50 Ватт
Негизги түрү2G11 (4-пин)
Түс температурасы3500 Келвин (Муздак Ак)
Жарыктык4300 Lumens
ФормаT4 (Duo-Tube)
ӨлчөмдөрБолжол менен 1 x 1 x 2.7 дюйм
Элемент Салмагы3.2 унция
МатериалВольфрам

8. Кепилдик жана колдоо

Specific warranty information for Eiko products may vary. Please refer to the original product packaging or the official Eiko webэң акыркы кепилдик чоо-жайын алуу үчүн сайтка кириңиз.

For technical support or further inquiries, please contact Eiko customer service through their official channels. Contact information can typically be found on the manufacturer's webсайт же продукт таңгак.

Өндүрүүчү: Эйко

Бөлүмдүн номери: DT50/35/RS

UPC: 031293493040

Тектеш документтер - DT50/35/RS

Preview EIKO LED T8 сызыктуу түтүктү орнотуу боюнча нускамалар
EIKO LED T8 B тибиндеги сызыктуу түтүктүү лампаларды орнотуу боюнча кеңири көрсөтмөлөр, анда коопсуздук чараларын, техникалык тейлөөнү жана флуоресценттик лампаларды модернизациялоо үчүн деталдуу зым схемалары камтылган.
Preview EIKO VL1 сериясындагы LED көлөмдүү трофферди орнотуу боюнча нускамалар
EIKO VL1 сериясындагы LED көлөмдүү трофферин орнотуу боюнча кеңири колдонмо, төмөнкүлөрдү камтыйтview, коопсуздук чаралары, орнотуу кадамдары, зымдардын схемалары жана сенсорлорду орнотуу. Кубаттуулукту жана CCT тандоону камтыйт.
Preview EIKO Z10 микротолкундуу мештин эки деңгээлдүү күңүртөтүүчү сенсору, фотоселлди орнотуу боюнча колдонмо
Фотоселл менен EIKO Z10 микротолкундуу эки деңгээлдеги күңүртөтүүчү сенсор үчүн комплекстүү орнотуу көрсөтмөсү, деталдаштырылган спецификациялар, сенсордун камтуусу жана туура орнотуу жана иштетүү үчүн FCC шайкештиги жөнүндө маалымат.
Preview EIKO CSX1 сериясындагы коммерциялык LED тилкесин орнотуу боюнча көрсөтмөлөр
EIKO CSX1 сериясындагы LED коммерциялык тилкелүү премиум арматураларын орнотуу боюнча кеңири колдонмо, анын ичинде беттик орнотуу, чынжыр орнотуу жана кошумча аксессуарларды орнотуу.
Preview EIKO LED Surface Canopy Square орнотуу нускамалары
Бул документте коопсуздук чараларын, үстүнкү монтаждоону, капталдагы зымдарды, асма монтаждоону, кубаттуулукту тууралоону жана Z10 сенсорун орнотууну камтыган EIKO LED Surface Canopy Square арматура үчүн толук орнотуу көрсөтмөлөрү камтылган.
Preview EIKO SEN5A-ACT сенсорун ишке киргизүү куралы: Колдонуу боюнча нускамалар
EIKO SEN5A-ACT кол сенсорун ишке киргизүү куралы үчүн колдонуучу колдонмосу.view, SEN5A-ACT жана SEN5A-CT программалары үчүн мүнөздөмөлөр, программанын шайкештиги, баскыч функциялары, параметр жөндөөлөрү жана колдонуу боюнча көрсөтмөлөр.