Furman PL8C

Furman PL-8C Power Conditioner User Manual

Model: PL8C

Introduction

The Furman PL-8C is an advanced level power conditioner designed to protect and optimize the performance of your electronic equipment. It features Furman's exclusive Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT) жана Extreme Voltage Shutdown (EVS) to provide comprehensive power protection and noise reduction. This unit includes nine AC outlets, dual retractable LED lights for rack illumination, and isolated outlet banks to minimize inter-component interference.

Коопсуздук маалыматы

Please read and understand all safety instructions before operating the Furman PL-8C. Failure to do so may result in injury or damage to the unit or connected equipment.

Өзгөчөлүктөрү

Жайгашуу

Пакеттен чыгаруу жана текшерүү

Carefully remove the PL-8C from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your dealer immediately.

Стойкага орнотуу

The PL-8C is designed for standard 19-inch rack mounting. Secure the unit using four rack screws (not included) through the front panel mounting ears. Ensure the rack provides adequate ventilation.

Кубатка туташуу

Plug the attached AC power cord of the PL-8C into a properly grounded 120V AC, 60Hz wall outlet. Ensure the outlet is capable of supplying 15 Amps.

Туташтыруучу жабдуулар

Connect your electronic equipment to the AC outlets on the rear panel of the PL-8C. The outlets are divided into isolated banks to reduce noise. For optimal performance, connect sensitive audio/video equipment to separate banks from high-current or digital devices. A front panel outlet is available for temporary connections.

Арткы view of Furman PL-8C showing 8 AC outlets, power cord, and circuit breaker reset button.

Image: Rear panel of the Furman PL-8C, illustrating the eight AC outlets, the main power cord, and the circuit breaker reset button. Note the two isolated outlet banks.

Иштөө нускамалары

Күйгүзүү/өчүрүү

Press the main power switch on the front panel to turn the unit on or off. When the unit is on, the front panel outlets and rear panel outlets will be energized.

Фронт view of Furman PL-8C with power switch, LED lights, and dimmer control.

Сүрөт: алдыңкы view of the Furman PL-8C, highlighting the main power switch, the retractable LED lights, and the dimmer control knob.

Using the LED Rack Lights

The PL-8C features two retractable LED lights on the front panel. Pull them out to illuminate your rack equipment. The "LAMP DIMMER" knob controls the brightness of these lights. Rotate the knob clockwise to increase brightness and counter-clockwise to decrease it.

Индикатор жарыктары

Бурчтуу алдыңкы view of Furman PL-8C showing the indicator lights for SMP, EVS, and LiFT.

Сүрөт: бурчтуу алдыңкы view of the Furman PL-8C, detailing the indicator lights for SMP (Series Multi-Stage Protection), EVS (Extreme Voltage Shutdown), and LiFT (Linear Filtering Technology).

Техникалык тейлөө

Тазалоо

Түзмөктүн сыртын жумшак, кургак чүпүрөк менен тазалаңыз. Суюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.

Circuit Breaker

The PL-8C is equipped with a 15 Amp thermal circuit breaker located on the rear panel. If the total current draw of your connected equipment exceeds 15 Amps, the breaker will trip, cutting power to the outlets. To reset, disconnect some equipment, then push the circuit breaker button back in.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
No power to outlets.Unit is off, circuit breaker tripped, or no power from wall outlet.Ensure main power switch is on. Check and reset the rear panel circuit breaker. Verify wall outlet has power.
"Protection OK" LED is off.Surge protection circuit has been compromised.The unit still functions as a power strip, but surge protection is no longer active. Contact Furman support for service.
"Extreme Voltage Shutdown" LED is on.Киргизүү тtage өтө жогору.The unit has automatically shut down power. It will restore power when the voltage returns to a safe level. Investigate the power source for voltagд маселелер.
Noise or hum in audio equipment.Ground loop or AC line noise.Ensure all equipment is properly grounded. Try connecting sensitive equipment to different isolated outlet banks. The LiFT technology should reduce common AC line noise.

Техникалык шарттар

Эскертүү: Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Furman website. You may also contact Furman customer service directly for assistance.

Тектеш документтер - PL8C

Preview Furman PL-PLUS CE Power Conditioner Колдонуучунун колдонмосу
Furman PL-PLUS CE электр кондиционери үчүн комплекстүү ээсинин колдонмосу, анын өзгөчөлүктөрү, коопсуздук нускамалары, иштеши, бузулууларды жоюу жана спецификациялар. SMP, EVS жана LiFT коргоо технологияларын камтыйт.
Preview Furman P-1400 AR E Power Conditioner Owner's Manual
Detailed owner's manual for the Furman P-1400 AR E Power Conditioner, covering features, specifications, installation, operation, troubleshooting, and warranty information. This unit provides True RMS Voltage Regulation, Series Multi-Stage Protection (SMP), and Linear Filtering Technology (LiFT).
Preview Furman PS-8RE III Power Conditioner and Sequencer Owner's Manual
The official owner's manual for the Furman PS-8RE III, detailing its advanced power conditioning, surge protection (SMP+), linear filtering (LiFT), and power sequencing features for audio-visual systems. Includes safety, operation, and troubleshooting guides.
Preview Furman F1500-UPS: 1500VA Uninterruptible Power Supply, Battery Backup, and Power Conditioner
Detailed information on the Furman F1500-UPS, a 1500VA battery backup and power conditioner designed for audio/video professionals, featuring SMP surge protection, LiFT noise filtration, AVR voltage regulation, and True Sine Wave output.
Preview Furman Pro Plugs: Power Conditioners and Distribution Units
Explore Furman Pro Plugs, including power conditioners (SS-6, SS-6B, SS-6B-Pro) and distribution units (PlugLOCK, ACX-25), offering surge protection, noise filtration, and reliable power for audio and video equipment. Features detailed specifications, safety guidelines, and warranty information.
Preview Furman Elite 10 E AC Power Conditioner Owner's Manual
Detailed owner's manual for the Furman Elite 10 E AC Power Conditioner, covering features, installation, safety, connections, warranty, and specifications for optimal audio and video performance.