Intermatic HB300RCL

Intermatic HB300RCL Outdoor Mechanical Timer Instruction Manual

Model: HB300RCL

1. Киришүү

This manual provides detailed instructions for the safe and efficient operation of your Intermatic HB300RCL Outdoor Mechanical Timer. This device is designed to automate the ON/OFF cycles of outdoor electrical appliances, offering convenience and energy management. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Коопсуздук боюнча маанилүү маалымат

ЭСКЕРТҮҮ: Өрт, электр шок же жеке жаракат алуу коркунучун азайтуу үчүн, ар дайым төмөнкү коопсуздук чараларын аткарыңыз:

3. Пакеттин мазмуну

Your Intermatic HB300RCL package should contain the following item:

4. Продукциянын өзгөчөлүктөрү

Intermatic HB300RCL Outdoor Mechanical Timer, showing the gray housing, clear protective cover, rotating dial with red and green trippers, ON/OFF switch, and attached power cord with a two-prong plug.

1-сүрөт: Intermatic HB300RCL Outdoor Mechanical Timer. This image displays the timer's gray plastic housing, a transparent hinged cover for weather protection, the central mechanical dial with time markings, and the red and green trippers used for setting ON/OFF times. A white ON/OFF indicator switch is visible above the dial, and a black power cord with a standard two-prong plug extends from the bottom.

The Intermatic HB300RCL timer offers the following key features:

5. Орнотуу

5.1 Таймерди орнотуу

The HB300RCL timer can be mounted to a wall or post using the keyhole slot located on the back of the unit. Ensure the mounting location is protected from direct heavy rain and is easily accessible for setting and adjustments. If temporary placement is desired, ensure the timer is on a stable, level surface.

5.2 Учурдагы убакытты орнотуу

  1. Locate the rotating dial on the front of the timer. The dial is marked with 24 hours, typically with AM/PM indicators.
  2. Rotate the entire dial clockwise until the current time aligns with the "TIME OF DAY" arrow indicator (usually a small triangle or line) located in the center of the dial.
  3. Ensure you correctly distinguish between AM and PM hours when setting the current time.

5.3 Кубатка туташуу

Plug the timer's integrated power cord into a standard 120V outdoor-rated, grounded electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for outdoor use safety.

6. Иштөө нускамалары

6.1 КҮЙГҮЗҮҮ/ӨЧҮРҮҮ Убакыттарын коюу

The timer uses captured trippers to set the ON and OFF times. There are typically two sets of trippers: a green tripper for ON and a red tripper for OFF.

  1. КҮЙГҮЗҮҮ Убактысын коюу: Locate the green tripper. Push it inwards towards the center of the dial at the desired time you want the connected appliance to turn ON.
  2. ӨЧҮРҮҮ Убактысы: Locate the red tripper. Push it inwards towards the center of the dial at the desired time you want the connected appliance to turn OFF.
  3. You can set up to two ON/OFF cycles per 24-hour period. Ensure the ON tripper is set before the OFF tripper for each cycle.
  4. The dial will rotate continuously. When the current time reaches a set tripper, the timer will switch the power state.

6.2 Using the Manual ON/OFF Switch

A manual ON/OFF switch is located above the dial. This switch allows you to override the timer's program temporarily. Pushing the switch will toggle the power to the connected appliance without affecting the set program. The indicator light will show the current power status.

6.3 Шайманды туташтыруу

Plug the appliance you wish to control into the single receptacle on the bottom of the timer unit. Ensure the appliance's power requirements do not exceed the timer's 12 Amp, 1500 Watt capacity.

7. Техникалык тейлөө

8. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Timer is not turning ON/OFF at set times.
  • Учурдагы убакыт туура эмес коюлган.
  • Trippers not engaged or set incorrectly.
  • Кол менен өзгөртүү которгучу иштетилген.
  • Verify the current time is aligned with the "TIME OF DAY" indicator.
  • Ensure green (ON) and red (OFF) trippers are pushed inwards at the desired times.
  • Check the manual ON/OFF switch and ensure it is in the desired automatic position.
Appliance connected to timer is not receiving power.
  • Timer not plugged into a live outlet.
  • GFCI розеткасы иштебей калды.
  • Appliance itself is faulty.
  • Таймер бузук.
  • Кубат булагын текшериңиз.
  • GFCI розеткасын баштапкы абалга келтириңиз.
  • Test the appliance by plugging it directly into a working outlet.
  • If all else fails, the timer may require replacement.
Protective cover does not stay closed.
  • No latching mechanism, relies on gravity or mounting position.
  • Ensure the timer is mounted upright. If not mounted, the cover may not stay closed. Consider securing with weather-resistant tape if necessary for temporary horizontal use, ensuring ventilation is not blocked.
Time markings on dial are difficult to read.
  • Low contrast printing, especially for nighttime hours.
  • Use in well-lit conditions. A flashlight may be helpful for setting times in low light.

9. Техникалык шарттар

Модель номериHB300RCL
БрендIntermatic
Тtage120 вольт
Ampөчүрүү12 Amps
Ватtage1500 Ватт
Number of ON/OFF Settingsкүнүнө 2
МатериалПластик
ТүсБоз
Элемент Салмагы8 унция
UPC078275110861
Өлчөмдөрү (пакет)11.2 x 6.8 x 2.4 дюйм

10. Кепилдик жана колдоо

10.1 Кепилдик маалыматы

This Intermatic HB300RCL timer comes with a Чектелген Өмүр бою Кепилдик. For specific terms, conditions, and limitations of this warranty, please refer to the official Intermatic warranty documentation or visit the manufacturer's webсайт.

10.2 Кардарларды колдоо

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Intermatic customer support. You can typically find contact information on the official Intermatic webсайт: www.intermatic.com.

Тектеш документтер - HB300RCL

Preview Intermatic EJ341C/EJ343C Жарыктандыруу таймеринин которгучун орнотуу жана программалоо боюнча колдонмо
Intermatic EJ341C (бир уюлдуу) жана EJ343C (үч тараптуу) жарыктандыруу таймеринин которгучтарын орнотуу жана программалоо боюнча кеңири нускамалар. Орнотуу, башкаруу элементтери, программалоо ыкмалары, бузулууларды оңдоо жана спецификацияларды камтыйт.
Preview Intermatic EI200 электрондук дубалга орнотулган санак таймерин орнотуу жана иштетүү боюнча колдонмо
Intermatic EI200 электрондук дубалга орнотулган артка саноо таймерин орнотуу жана иштетүү боюнча кеңири колдонмо. Функцияларына 5-30 мүнөттүк убакыт диапазондору, үзгүлтүксүз КАРМАП туруу режими жана 15А жалпы максаттагы, 1000 Вт вольфрам жана 1/4 HP моторлору үчүн рейтингдер кирет. Кепилдик жөнүндө маалымат камтылган.
Preview Intermatic EI210 электрондук дубалга орнотулган санак таймери - Орнотуу жана иштетүү боюнча колдонмо
Intermatic EI210 электрондук дубалга орнотулган артка саноо таймери боюнча кеңири колдонмо, анын ичинде функциялары, орнотуу кадамдары, иштөө режимдери (таймер жана кармоо) жана кепилдик жөнүндө маалымат. Intermatic Incorporated компаниясынын техникалык мүнөздөмөлөрүн жана байланыш маалыматтарын камтыйт.
Preview Intermatic E-1020 24 сааттык дубалга орнотулуучу таймерди кантип орнотуу жана иштетүү керек
Intermatic E-1020 24 сааттык көп программалуу дубалга орнотулуучу механикалык таймерди орнотуу жана иштетүү боюнча кеңири колдонмо. Зымдарды орнотуу боюнча көрсөтмөлөрдү, программалоо кадамдарын жана кепилдик жөнүндө маалыматты камтыйт.
Preview Intermatic T173 T170 Механикалык Таймерди которуу - 24 саат, 125 В, 5 HP
Intermatic T173 T170 механикалык таймер которуштуруу үчүн толук мүнөздөмөлөрү. Өзгөчөлүктөрү 24 сааттык жөндөө, 125 VAC, 5 HP мотор рейтинги, 2NO DPST байланыштары жана NEMA 1 корпусу. Коммерциялык, өнөр жай, турак жай, сырткы жана HVACR колдонмолору үчүн ылайыктуу.
Preview Intermatic T100 сериясындагы таймер: Иштетүү жана орнотуу боюнча колдонмо
Intermatic T100 сериясындагы механикалык таймерлерди кантип иштетүү, орнотуу жана бузулууларды оңдоо боюнча кеңири колдонмо, анын ичинде коопсуздук боюнча көрсөтмөлөр, компоненттердин сүрөттөмөлөрү жана колдоо үчүн ресурстар.