Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator. Please read this manual thoroughly before using the product.
The Fenwick 20 is a pneumatic 20 oz sausage dispenser designed for consistent application. It features a lightweight design, an adjustable regulator, and a plunger system that provides consistent pressure on the material. Key components are manufactured in the U.K. and assembled in Michigan.
Image: The COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator, showing its main body, handle, and air inlet.
Продукт өзгөчөлүктөрү
- True adjustable air regulator: 125 PSI Maximum; 145 PSI Maximum Input.
- Floating plunger action with secure cord; Plunger Extension for reduced waste.
- Drawn aluminum barrel construction.
- Instant dump valve for quick pressure release.
- Series 3 Air System for efficient operation.
- Integrated silencer for reduced noise during operation.
- Quick release end cap for easy material loading and unloading.
- Rotating air hose connector for flexible movement.
- Includes six white cone nozzles for various application needs.
Орнотуу нускамалары
- Пакеттен чыгаруу: Carefully remove the applicator and all accessories from the packaging. Verify all components listed in the "Included Components" section are present.
- Аба менен камсыздоо байланышы: Connect a compressed air hose (not included) to the rotating air hose connector at the base of the handle. Ensure the connection is secure and leak-free. The maximum input pressure is 145 PSI.
- Regulator Adjustment: The applicator features an adjustable air regulator. Before use, adjust the regulator to the desired operating pressure, typically between 0-125 PSI, depending on the material viscosity and desired flow rate.
- Материалды жүктөө:
- Unscrew the quick release end cap from the rear of the aluminum barrel.
- Insert the 20 oz (600 ml) sausage material into the barrel.
- Ensure the plunger system is retracted to allow for full insertion of the sausage.
- Replace and securely tighten the quick release end cap.
- Сопло тиркемеси: Select an appropriate white cone nozzle for your application and securely attach it to the front of the applicator barrel. Trim the nozzle tip to the desired bead size.
Иштөө нускамалары
- Биринчи коопсуздук: Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the applicator. Ensure adequate ventilation in your workspace.
- Initiating Flow: Point the nozzle at a scrap surface. Gently press the trigger to begin material flow. Adjust the air regulator as needed to achieve a consistent and smooth bead.
- Колдонмо: Apply the material by moving the applicator smoothly along the desired path. Maintain consistent pressure on the trigger for an even bead.
- Stopping Flow: Release the trigger to stop material flow. The instant dump valve will release pressure, preventing material from continuing to dispense.
- Material Change/Removal: To change or remove material, ensure the air supply is disconnected. Unscrew the quick release end cap and carefully remove the sausage.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your COX pneumatic applicator.
- Тазалоо: After each use, especially when using fast-curing materials, clean any residual material from the nozzle and the inside of the barrel. Use appropriate solvents recommended by the material manufacturer.
- Plunger System: Periodically inspect the plunger and its cord for wear or damage. Ensure the plunger moves freely within the barrel.
- Аба байланыштары: Check all air connections and hoses regularly for leaks or damage. Replace worn seals or fittings as necessary.
- Майлоо: Apply a small amount of pneumatic tool oil to the air inlet periodically to lubricate internal components and prevent corrosion.
- Сактагыч: Store the applicator in a clean, dry place away from extreme temperatures and direct sunlight. Disconnect from air supply before storage.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No material flow or inconsistent flow |
|
|
| Байланыштардан аба агып чыгат |
|
|
| Material continues to flow after trigger release |
|
|
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель номери | 63006-600 Fenwick 600 ml. |
| OEM бөлүктүн номери | Fenwick 20 |
| Бренд | COX |
| Кубаттуулугу | 20 Ounce (600 ml) Sausage |
| Максималдуу киргизүү басымы | 145 PSI |
| Максималдуу иштөө басымы | 125 PSI |
| Өлчөмдөрү (L x W x Y) | 22 x 10 x 3 дюйм |
| Элемент Салмагы | 2.79 фунт (1.27 килограмм) |
| UPC | 717647610072 |
| Курулуш түрү | Multi-part, Drawn aluminum barrel |
| Камтылган компоненттер | Product & Instructions Guide, Six white cone nozzles |
Кепилдик жана колдоо
For warranty information or technical support regarding your COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator, please contact COX North America directly.
COX is committed to quality and durability. All products are manufactured in-house at facilities in Haslett, Michigan, and Newbury, England, adhering to rigid quality management processes.
For further assistance, visit the official COX webсайтка же сатып алуу документтериңиз менен берилген байланыш маалыматына кайрылыңыз.
