Introduction
This user manual provides comprehensive instructions for the KERBL Fence Check with LED Display, Model 44669. It covers product overview, setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the device to ensure safe and effective operation.
The KERBL Fence Check is designed for convenient, non-contact measurement of electric fence voltage. It features an LED display for clear voltage indication and a battery status indicator.
Коопсуздук маалыматы
- Always handle electrical testing equipment with care.
- Аппаратты ачууга же өзгөртүүгө аракет кылбаңыз. Ичинде колдонуучу тейлей турган бөлүктөр жок.
- Keep the device dry. Exposure to moisture can damage the electronics and pose a safety risk.
- Аппаратты балдар жетпеген жерде сактаңыз.
- Ensure the battery is correctly installed before use.
- This device is for testing electric fence voltage only. Do not use it for other purposes.
Продукт бүттүview
The KERBL Fence Check is a compact, handheld device designed for quick and easy electric fence voltage testing. It operates wirelessly, eliminating the need for a ground spike.
Сүрөт 1: Алдыңкы view of the KERBL Fence Check device, highlighting the LED voltage indicators, low kV warning, battery status light, and the 'PUSH' button.
Компоненттери:
- Тtage Indicator LEDs: Four green LEDs indicating voltage levels (2.5 kV, 4.0 kV, 6.0 kV, 8.0 kV).
- Low kV LED: A red LED indicating low voltage.
- Батареянын абалы LED: An LED indicating the battery charge level.
- PUSH баскычы: Activates the measurement function.
- Батарея бөлүмү: Located on the back (not visible in Figure 1).
Жайгашуу
Батарея орнотуу:
- Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
- Carefully slide or unclip the cover to open it.
- Insert one 9-volt block battery, ensuring correct polarity (+ and -). The device comes with a 9-volt block battery included.
- Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.
- After battery installation, the battery status LED should briefly illuminate, indicating sufficient power. If it does not, check battery orientation or replace the battery.
Иштөө нускамалары
The KERBL Fence Check allows for quick and easy voltage measurement without direct contact or a ground spike.
Өлчөөнү жүргүзүү:
- Аппаратты колуңузга бекем кармаңыз.
- Approach the electric fence wire or tape. The measurement is carried out at a distance of maximum 0 - 5 cm from the fence.
- Press and hold the 'PUSH' button on the front of the device.
- Observe the LED indicators. The voltage is displayed by four bright green diodes in four levels: 2500 volts, 4000 volts, 6000 volts, and 8000 volts.
- Эгерде томtage is low, a red LED will illuminate, indicating a potential issue with the fence's power.
- Release the 'PUSH' button once the reading is taken.
Figure 2: A hand pressing the 'PUSH' button to activate the measurement.
Figure 3: Proper usage of the device, held close to the electric fence for measurement.
Дисплейди түшүнүү:
- Green LEDs (2.5 kV, 4.0 kV, 6.0 kV, 8.0 kV): Each illuminated green LED indicates that the fence voltage has reached or exceeded that specific level. For example, if the 6.0 kV LED is lit, the voltage is at least 6000 volts.
- Red LED (Low kV): If this LED illuminates, the fence voltage is below the optimal operating range, indicating a need for inspection or repair of the fence system.
- Батареянын абалы LED: This LED indicates the remaining battery life. If it flashes or remains off during operation, the battery may need replacement.
Figure 4: The diagram on the left shows an incorrect method of testing with a ground spike, while the diagram on the right illustrates the correct non-contact method without a ground spike, as intended for this device.
Техникалык тейлөө
- Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Батареяны алмаштыруу: Replace the 9-volt battery when the battery status LED indicates low power or when the device fails to power on. Refer to the "Battery Installation" section for instructions.
- Сактагыч: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | Өлүк же туура эмес орнотулган батарея. | Батареянын полярдуулугун текшериңиз; батареяны алмаштырыңыз. |
| No LED indication when testing. | Device too far from fence; fence has no voltage; battery low. | Ensure device is within 0-5 cm of fence; check fence energizer; replace battery. |
| Only "Low kV" red LED illuminates. | Fence томtage өтө төмөн. | Inspect fence energizer, connections, and fence line for faults or shorts. |
| Battery status LED indicates low power. | Батарея түгөнүп калды. | Replace the 9-volt battery. |
Техникалык шарттар
- Модель номери: 44669
- Бренд: KERBL
- Тtage Дисплей: 4 levels (2.5 kV, 4.0 kV, 6.0 kV, 8.0 kV) via green LEDs
- Low Voltage Индикатор: Кызыл LED
- Өлчөө аралык: Max. 0 - 5 cm from fence
- Кубат булагы: 1 x 9-volt block battery (included)
- Өлчөмдөрү: Болжол менен 6.85 x 3.19 x 1.14 дюйм
- Салмагы: Болжол менен 3.53 унция
- Өндүрүүчү: Kerbl
Кепилдик жана колдоо
KERBL products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official KERBL webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
For technical support or inquiries not covered in this manual, please contact KERBL customer service through their official channels. Contact details can typically be found on the product packaging or the manufacturer's webсайт.
