Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.
Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Коопсуздук маалыматы
- Always turn off the main water supply before installing or performing maintenance on the faucet.
- Орнотуу учурунда коопсуздук көз айнек сыяктуу тиешелүү жеке коргоочу шаймандарды тагыныңыз.
- Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу сантехникке кайрылыңыз.
- Суу агып кетпеши үчүн бардык туташуулардын коопсуз экенин текшериңиз.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Lavatory Faucet Assembly
- Монтаждоочу жабдык
- Matching Pop-Up Drain Assembly
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | KB3605BL |
| Аяктоо түрү | Мунай сүртүлгөн коло |
| Материал | Жез |
| Монтаж түрү | Deck Mount |
| Орнотуу түрү | Борбордук топтом |
| Hole Count | 3 |
| Туткалардын саны | 2 |
| Spout Reach | 4 дюйм |
| сүйлөйсүз Бийиктиги | 3.5 дюйм |
| Сууну тазалоо | 2 дюйм |
| Максималдуу агым ылдамдыгы | 1.8 Gallons Per Minute (6.8 Liters Per Minute) |
| Картридждин түрү | Dura Seal Washerless |
| Өзгөчө өзгөчөлүк | Pop Up Drain Included |
Image: Dimensional drawing providing precise measurements for installation.
Орнотуу жана орнотуу
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Раковинаны даярдаңыз: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Install the Faucet Body: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Суу менен камсыздоо линияларын туташтыруу: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Көчмө дренажды орнотуу: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Агышуу үчүн сыноо: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.
Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Операция
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- Муздак суу: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Ысык суу: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Температураны көзөмөлдөө: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
- Агым ылдамдыгы: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Көчмө дренаж: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Техникалык тейлөө
Proper care will maintain the finish and performance of your faucet:
- Тазалоо: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish.
- Аэраторду тейлөө: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Агуунун алдын алуу: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Төмөн суу агымы | Clogged aerator; partially closed supply valves. | Clean aerator; ensure supply valves are fully open. |
| Крандын түтүгүнөн суу агып жатат | Эскирген картридж. | Картриджди алмаштырыңыз. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Суунун температурасы маселелери | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Кепилдик маалымат
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass webсайт.
Колдоо
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's webсайтында же продуктунун таңгагында.
Көбүрөөк маалымат алуу үчүн, киргиле Kingston Brass Store.
