Fluke 1653B көп функциялуу орнотуу сынагычынын колдонуучу колдонмосу

1. Introduction and Overview

The Fluke 1653B is a VDE-certified multifunction installation tester designed to verify the safety of electrical installations in private, commercial, and industrial applications. This device offers a comprehensive suite of tests including insulation resistance, loop impedance, RCD/FI testing, earth resistance, and phase rotation. It features a digital display, internal memory, and a PC interface for documentation and reporting.

Негизги өзгөчөлүктөрү:

• так окуу үчүн санариптик дисплей.
• Limit value display for quick pass/fail indication.
• Insulation resistance measurement.
• Measurement of resistances of insulating floors and walls.
• Low-ohm measurement for continuity.
• Earth resistance measurement.
• Loop impedance measurement, including loop measurement without RCD/FI activation.
• Mains томtage өлчөө.
• Determination of short-circuit current/overcurrent protection installations.
• RCD/FI testing, including type A RCDs and increasing earth current tests.
• Phase rotation test.
• Internal memory for storing measurement values.
• PC interface for data transfer and reporting.

1-сүрөт: Фронт view of the Fluke 1653B Multifunction Installation Tester. The device is yellow and black, featuring a large green digital display showing measurement values (e.g., 0.23 Ω and 1000 A). Control buttons such as 'TEST', 'ZERO', 'MEMORY', and function buttons (F1-F4) are visible on the left side, while a rotary dial for selecting measurement modes (e.g., Insulation, Loop, RCD, Earth, Phase Rotation, Volts) is on the right.

2. Орнотуу

2.1. Батареяны орнотуу

The Fluke 1653B is battery-powered. Before initial use, or when the low battery indicator appears, ensure fresh batteries are installed. Refer to the battery compartment cover for correct polarity and battery type (typically AA or C cells, depending on the model variant).

1. Аппараттын артындагы батарея бөлүкчөсүн табыңыз.
2. Open the battery compartment cover using a screwdriver or coin if necessary.
3. Insert the required number of batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Батарея бөлүгүнүн капкагын бекем жабыңыз.

2.2. Баштапкы күйгүзүү

Press the green power button (labeled with a circle and vertical line) located near the bottom left of the control panel to turn on the device. The digital display will illuminate and perform a self-test.

3. Иштөө нускамалары

This section provides general guidance for operating the Fluke 1653B. Always refer to the on-screen prompts and safety warnings during operation.

3.1. Selecting a Measurement Function

Use the large rotary dial on the right side of the device to select the desired measurement function. The selected function will be indicated on the display.

• VOLTS (V.): For measuring AC/DC voltage.
• INSULATION (R_ISO): For insulation resistance tests.
• CONTINUITY (R_LO): For low-ohm continuity tests.
• LOOP (Z_L NO TRIP): For loop impedance measurement without tripping RCDs.
• LOOP (Z_L HI CURRENT): For high current loop impedance measurement.
• ΔT RCD TIME: For RCD trip time measurement.
• I_ΔN RCD TRIP: For RCD trip current measurement.
• R_E ЖЕР: For earth resistance measurement.
• ФАЗАЛЫК АЙЛАНДЫРУУ: For determining phase sequence.

3.2. Тестти аткаруу

Once a function is selected and test leads are connected appropriately, press the large СЫНОО button (located on the bottom left) to initiate the measurement. The display will show the measurement result.

The НӨЛ button can be used to null out lead resistance for accurate low-ohm measurements.

3.3. Using Memory Functions

The device includes internal memory for storing measurement values. Use the ЭСКЕРТҮҮ button and the arrow keys to navigate and save readings. Refer to the on-screen prompts for specific memory operations.

• Басыңыз ЭСКЕРТҮҮ to access memory functions.
• Use the up/down arrow keys to scroll through stored readings or memory locations.
• Function buttons (F1-F4) may provide additional options related to memory, such as saving, recalling, or deleting data.

3.4. Компьютердин интерфейси

The Fluke 1653B features a PC interface for documentation and reporting. Connect the device to a computer using the appropriate cable (sold separately) and use Fluke's software (if applicable) to download and analyze stored data.

4. Техникалык тейлөө

Proper maintenance ensures the longevity and accuracy of your Fluke 1653B.

4.1. Тазалоо

Clean the instrument casing жарнама мененamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any electrical circuits before cleaning.

4.2. Сактоо

When not in use for extended periods, remove the batteries to prevent leakage. Store the device in a dry, cool place, away from direct sunlight and extreme temperatures.

4.3. Калибрлөө

For continued accuracy, it is recommended to have the Fluke 1653B calibrated periodically by an authorized service center. Refer to Fluke's official documentation for recommended calibration intervals.

5. Кыйынчылыктарды

This section provides solutions to common issues. For more complex problems, contact Fluke customer support.

6. Техникалык шарттар

The following specifications are for the Fluke 1653B Multifunction Installation Tester:

• Модель номери: Fluke 1653B
• Өндүрүүчү: FLUKE NETWORKS
• Тастыктоо: VDE
• Дисплей түрү: Санарип
• Кубат булагы: Батарея менен иштейт
• Түсү: Кара/Сары
• Өлчөө түрү: Multimeter (Multifunction Tester)
• UPC: 095969460873
• Биринчи жеткиликтүү датасы: 15-январь, 2020-жыл

7. Кепилдик жана колдоо

For warranty information, technical support, or service, please contact Fluke Networks directly or visit their official webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Онлайн ресурстар: For the most up-to-date information, FAQs, and software downloads, please visit the official Fluke Networks support page.