1. Киришүү
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Proxxon 27172 Micro Band Saw MBS 240/E Basic. Please read this manual thoroughly before using the machine to ensure proper handling and to prevent injury or damage.
Figure 1: The Proxxon 27172 Micro Band Saw MBS 240/E Basic, a compact and robust tool designed for precision cutting of various materials.
2. Орнотуу
2.1 Таңгактан чыгаруу жана текшерүү
Carefully remove the band saw from its packaging. Inspect all components for any signs of damage that may have occurred during transit. Ensure all included components are present:
- Proxxon MBS 240/E Band Saw Unit
- 1 band saw blade (1065 x 5 x 0.4 mm, 14 teeth)
- Work table with miter gauge
Figure 2: Detached work table and miter gauge, essential components for precise cutting operations.
2.2 Жумушчу аянтты даярдоо
Set up the band saw on a stable, level workbench. Ensure adequate lighting and ventilation. Keep the work area clean and free of clutter. Maintain a safe distance from other machinery and personnel.
2.3 Бычакты орнотуу (эгерде алдын ала орнотулбаса)
Refer to the markings on the machine for correct blade direction. Loosen the blade tension knob and open the blade guards. Carefully position the blade around the wheels, ensuring the teeth point downwards towards the work table. Re-tension the blade according to the manufacturer's guidelines and close the guards securely.
2.4 Кубат туташтыруу
Connect the band saw to a suitable 12V DC power supply. Ensure the power switch is in the "OFF" position before connecting. The unit operates at 85 watts.
3. Операция
3.1 Коопсуздук чаралары
- Ар дайым тиешелүү жеке коргоочу шаймандарды (ЖКК), анын ичинде коопсуздук көз айнектерин жана угууну коргоону тагыныңыз.
- Never wear loose clothing or jewelry that could get caught in moving parts.
- Ensure the workpiece is securely supported before cutting.
- Keep hands clear of the blade path. Use a push stick when cutting small pieces.
- Do not force the material into the blade; allow the blade to cut at its own pace.
3.2 Adjusting the Work Table and Miter Gauge
The work table can be tilted up to 45 degrees for angled cuts. Loosen the locking knob, adjust to the desired angle using the scale, and re-tighten. The miter gauge can be inserted into the slot on the work table to guide the workpiece for accurate cross-cuts and angled cuts.
3-сүрөт: Детальдуу view of the adjustable work table and miter gauge, allowing for precise angle cuts.
3.3 Material Cutting Guide
The machine features a material cutting guide chart to assist in selecting the appropriate blade speed and feed rate for different materials. Refer to this chart for optimal performance and blade longevity.
Figure 4: Integrated material cutting guide chart on the machine, providing recommendations for various materials and blade types.
3.4 Баштоо жана токтотуу
To start the band saw, press the green "ON" button. To stop the machine, press the red "OFF" button. Always allow the blade to reach full speed before beginning a cut and to come to a complete stop before leaving the machine unattended.
4. Техникалык тейлөө
Regular maintenance ensures the longevity and safe operation of your Proxxon band saw. Always disconnect the power supply before performing any maintenance.
4.1 Тазалоо
After each use, clear sawdust and debris from the work table, blade guides, and inside the blade housing. Use a brush or vacuum cleaner. Do not use solvents that may damage painted surfaces or plastic components.
4.2 Blade алмаштыруу
Replace the blade when it becomes dull or damaged. Follow the blade installation steps in Section 2.3 in reverse to remove the old blade, and then follow them to install the new blade. Ensure the correct blade type and size (1065 x 5 x 0.4 mm) are used.
4.3 Майлоо
Periodically check and lubricate moving parts as indicated in the machine's specific diagrams (not provided in this general manual). Use a light machine oil.
5. Кыйынчылыктарды
This section addresses common issues you might encounter with your band saw. For problems not listed here, contact qualified service personnel.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Машина иштебейт | No power supply; Power switch off; Overload protection tripped | Check power connection; Ensure switch is ON; Reset overload protection (if applicable) |
| Бычак тентип кетет же так эмес кесип алат | Dull blade; Incorrect blade tension; Worn blade guides | Replace blade; Adjust blade tension; Inspect and adjust/replace blade guides |
| Ашыкча титирөө же ызы-чуу | Loose components; Unbalanced blade; Worn bearings | Check all fasteners; Replace blade; Contact service for bearing inspection |
6. Техникалык шарттар
Technical specifications for the Proxxon 27172 Micro Band Saw MBS 240/E Basic:
- Модел: 27172
- Бренд: PROXXON
- Кубат булагы: 12 Volts DC, 85 Watts
- Бышактын узундугу: 1065 мм (болжол менен 41.9 дюйм)
- Blade өлчөмдөрү: 5 x 0.4 мм
- Бычак тиштери: 14 teeth per inch (TPI)
- Ылдамдыгы: 4500 RPM (blade speed)
- Max. Cutting Angle: 45 Degrees (with tilting table)
- Продукциянын өлчөмдөрү (L x W x Y): 20.47" x 13.78" x 9.84"
- Элемент Салмагы: 7.78 кг (17.12 фунт)
- Камтылган компоненттер: 1 band saw blade, work table, miter gauge
- Беттик сунуш: Жыгач, металл
- Түсү: Жашыл
7. Кепилдик жана колдоо
Продукциянын кепилдиги жана кардарларды колдоо жөнүндө маалымат, адатта, продукттун таңгагында же өндүрүүчүнүн расмий дарегинде берилет. website. Please refer to those resources for detailed warranty terms and contact information for technical assistance.
For general inquiries or to find authorized service centers, please visit the official PROXXON webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
