Progress Lighting AirPro P2502-80 52 дюймдук үйдүн ичиндеги/сырткы шып желдеткичи үчүн колдонмо

1. Киришүү

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting AirPro P2502-80 52-Inch Indoor/Outdoor Ceiling Fan. Please read all instructions carefully before beginning installation or use. Keep this manual for future reference.

Figure 1.1: Progress Lighting AirPro P2502-80 52-Inch Indoor/Outdoor Ceiling Fan.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked 'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS' and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

• Always disconnect power at the main circuit breaker before attempting any installation or maintenance.
• Ensure all electrical connections comply with local codes, ordinances, and the National Electrical Code.
• Do not use plastic electrical boxes for fan support.
• Бул продукт нымдуу жерлерге ылайыктуу болуп саналат.
• Сунуш 65 Эскертүү: Бул продукт Калифорния штатында рак, тубаса кемтик же башка репродуктивдүү зыян келтирүүчү химиялык заттарды камтышы мүмкүн.

3. Эмнелер камтылган

Carefully unpack your fan and inspect the contents. Refer to your fan's specific instruction manual for a complete list of parts. Typical components include:

• Желдетүүчү мотор корпусу
• Желдеткичтер (5)
• Төмөнкү ассамблея
• Чатыр капкагы
• Кронштейн орнотуу
• Light Kit (if applicable)
• Glass Shade (if applicable)
• Алыстан башкаруу (эгер бар болсо)
• Аппараттык камсыздоо топтому (бурамалар, зым гайкалар ж.б.)

4. Керектүү куралдар

Орнотуу үчүн, адатта, төмөнкү шаймандар талап кылынат:

• Филлипс баш бурагычы
• Step Ladder
• Wire Strippers
• Жөнгө салынуучу ачкыч

5. Орнотуу

For a visual guide to ceiling fan installation, please refer to the official video below. Always consult your specific fan's instruction manual for precise details.

5.1 Монтаждоо ордун даярдоо

Ensure the intended mounting location is a secure ceiling fan-rated metal electrical box, capable of supporting at least 35 lbs (15.9 kg). If an existing fixture is present, ensure the outlet box is suitable for fan support. For mounting locations between support beams, a fan-rated support brace (e.g., Hubbell RACO Kwik-Brace) may be required.

5.2 Downrod Assembly

Remove the clevis pin from the downrod by first removing the cotter pin. Set both pins aside for later use. Prepare the canopy cover and coupling cover by sliding them onto the downrod. Align the downrod with the coupling on top of the fan motor housing. Reinsert the clevis pin, ensuring wires are not damaged, and secure it with the cotter pin. Tighten the set screws on the coupling to lock the downrod in place. This step is crucial to prevent fan wobble.

Figure 5.1: Downrod Assembly Diagram.

5.3 Монтаждык кронштейнди орнотуу

Install the mounting bracket to the ceiling fan-rated outlet box. Pass the electrical wires through the hole in the ceiling for easy access. Lift the assembled fan and place the mounting ball from the downrod into the ceiling mounting bracket. Rotate the ball until the slot falls into place, ensuring the fan is securely seated.

5.4 Вентиляторду туташтыруу

Wire the fan according to the installation instructions provided with your specific model. Generally, connect black wires to black, white to white, and bare copper/green wires as the ground wires. Some fans may include a receiver that needs to be wired in as per instructions. Use the provided wire nuts to make secure connections. Trim any excess wire from the downrod, leaving a minimum of 6 extra inches for connections.

5.5 Canopy and Blade Attachment

Push the wires and receiver (if applicable) into place and cover them by attaching the canopy cover. Move the coupling cover into place. Attach the fan blades to the motor housing using a screwdriver. It is recommended to attach all screws loosely at first, then go back and securely tighten them to prevent fan wobble.

Figure 5.2: Detail of a fan blade.

5.6 Light Kit Installation (if applicable)

If your fan includes a light kit, it may require installing a mounting plate on the bottom of the motor housing before attaching the light kit. Install the light kit using the provided screws in the motor housing and mounting plate. If your fan has a glass shade, align it in place over the light kit and twist it to secure it.

Figure 5.3: Fan with integrated light kit.

5.7 Ceiling Height and Fan Size Considerations

The bottom of the fan should be at least 7 feet (84 inches) from the floor. For lower ceilings, a hugger fan or a fan that can be mounted close to the ceiling is recommended. The appropriate fan size depends on the room's square footage:

Figure 5.4: Fan Size Selection Guide.

Figure 5.5: Downrod Selection Guide.

6. Операция

6.1 Airflow Direction (Reversible Motor)

Your fan features a reversible motor for year-round comfort. The direction of airflow can be changed to suit seasonal needs:

• Counter-Clockwise / Forward: Used during warmer months to create a downward draft, making the room feel cooler.
• Clockwise / Reverse: Used during cooler months to create an upward draft, pushing warm air to the ceiling and circulating it throughout the room, making it feel warmer.

Figure 6.1: Airflow Direction Diagram.

6.2 Ылдамдыкты көзөмөлдөө

The fan features a 3-speed control. Adjust the fan speed using the pull chain or remote control (if included) to achieve desired air circulation.

Figure 6.2: Fan Pull Chain.

6.3 Remote Control Pairing (if applicable)

If your fan includes a remote control, you may need to go through a remote pairing process shortly after restoring power to the fan. Refer to your remote control's specific instructions for pairing procedures.

7. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин шыптын желдеткичиңиздин оптималдуу иштешин жана узак иштөөсүн камсыз кылат.

• Тазалоо: Мезгил-мезгили менен вентилятордун жана мотор корпусун жумшак, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• бекиткичтерди бекемдөө: Check all screws and fasteners periodically to ensure they are tight. Loose connections can cause noise and wobble.

8. Кыйынчылыктарды

If your fan experiences issues, consider the following common solutions:

• Fan Wobbling or Clicking:
  • Loosen and retighten the downrod set screws and fan blade screws. Ensure all screws are securely fastened.
  • Randomly select two blades from the fan and switch their positions to rebalance the fan.
• Желдеткич иштебейт:
  • Check that power is restored at the circuit breaker.
  • Бардык зым байланыштары коопсуз экендигин текшериңиз.
  • If using a remote, ensure it is properly paired and has fresh batteries.

9. Техникалык шарттар

10. Кепилдик

This Progress Lighting AirPro P2502-80 Ceiling Fan comes with a 15 жылдык чектелген кепилдик. Please refer to the included installation sheet or contact customer support for full warranty details and terms.

11. Колдоо

For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the product packaging or the official Progress Lighting webсайт.