1. Киришүү
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kwikset 780 Single Cylinder Deadbolt with SmartKey Security. Please read all instructions carefully before installation and use. Retain this manual for future reference.
Сүрөт: алдыңкы view of the Kwikset 780 Single Cylinder Deadbolt in Venetian Bronze finish.
2. Коопсуздук маалыматы
Орнотуу жана колдонуу учурунда төмөнкү коопсуздук чараларын сактаңыз:
- Always wear appropriate personal protective equipment, such as safety glasses, during installation.
- Ensure the door is properly prepared according to the provided templates and measurements.
- Do not use excessive force when tightening screws, as this may damage the lock components or the door.
- Бардык кичинекей бөлүктөрүн балдар жетпеген жерде сактаңыз.
- This deadbolt is designed for residential use on exterior-facing doors requiring keyed entry from the outside and a turn-piece from the inside.
3. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Exterior Keyed Deadbolt Cylinder
- Interior Turn Piece
- Жөнгө салынуучу кулпу
- 2 Ачкычтар
- Монтаждоо бурамалар
- Strike Plate
- SmartKey куралы
- Орнотуу жабдыктары
- Орнотуу боюнча колдонмо (бул документ)
Image: Kwikset deadbolt and matching knob installed on a door, showcasing the product in use.
4. Орнотуу
The Kwikset 780 Deadbolt is designed for easy installation with basic tools. A Phillips head screwdriver is typically the only tool required.
4.1 Эшикти даярдаңыз
- Check Door Dimensions: Эшигиңиздин калыңдыгы 1-3/8" (35мм) жана 1-3/4" (44мм) ортосунда экенин текшериңиз.
- Adjust Latch Backset: The latch is adjustable for 2-3/8" (60mm) or 2-3/4" (70mm) backsets. Twist the latch mechanism to adjust if necessary.
4.2 Кулпуну орнотуу
- Insert the latch into the edge bore hole of the door. Ensure the latch bolt faces the door frame.
- Secure the latch with the two small screws provided.
4.3 Install the Exterior Cylinder
- Insert the exterior keyed cylinder into the door, ensuring the tailpiece passes through the center hole of the latch mechanism.
4.4 Install the Interior Turn Piece
- Align the interior turn piece with the exterior cylinder, ensuring the tailpiece engages with the turn piece mechanism.
- Secure the interior and exterior components using the two long mounting screws. Tighten evenly until snug.
4.5 Сокку пластинасын орнотуңуз
- Align the strike plate with the latch bolt on the door frame.
- Mark and drill pilot holes if necessary, then secure the strike plate with the two screws provided.
Сыноо операциясы: After installation, test the deadbolt operation with both the key from the exterior and the turn piece from the interior to ensure smooth locking and unlocking.
5. Иштөө нускамалары
5.1 Кулпуну ачуу жана ачуу
- Сыртынан: Insert the key into the cylinder and turn to lock or unlock.
- Ички иштерден: Rotate the turn piece to lock or unlock.
5.2 SmartKey кайра ачкычтоо нускамалары
The Kwikset SmartKey Security feature allows you to re-key your lock to a new key in seconds. This is useful if you lose a key, move into a new home, or want to consolidate multiple Kwikset SmartKey locks to a single key.
Image: The SmartKey tool, used for re-keying Kwikset SmartKey locks.
- Учурдагы ачкычты киргизүү: Учурда иштеп жаткан ачкычыңызды цилиндрге толугу менен салыңыз.
- Ачкычты айлантуу: Rotate the key 90 degrees clockwise (to the 3 o'clock position).
- SmartKey куралын киргизүү: While holding the key in the 90-degree position, insert the SmartKey tool firmly and fully into the SmartKey hole. You will feel a slight click.
- SmartKey куралын алып салуу: SmartKey куралын алып салыңыз.
- Учурдагы ачкычты алып салуу: Remove your current key.
- Жаңы ачкыч киргизүү: Жаңы ачкычыңызды цилиндрге толугу менен салыңыз.
- Жаңы ачкычты айлантуу: Rotate the new key 180 degrees counter-clockwise (to the 9 o'clock position) and then back to the 12 o'clock position.
- Жаңы ачкычты сыноо: Your lock is now re-keyed. Test the new key to ensure it operates the deadbolt smoothly.
Image: A hand inserting the SmartKey tool into the small slot on the lock cylinder while the original key is turned 90 degrees.
Image: A hand inserting the new key into the lock cylinder after the re-keying process has been initiated.
Image: A hand turning the newly inserted key 180 degrees to complete the re-keying process.
For a visual guide on SmartKey re-keying, please watch the video below:
Video: Kwikset SmartKey Security. This video demonstrates the process of re-keying a Kwikset SmartKey lock, highlighting its pick-resistant and bump-proof features.
6. Техникалык тейлөө
Proper maintenance ensures the longevity and smooth operation of your deadbolt:
- Тазалоо: Кулпуну жумшак, d менен тазалаңызamp кездеме. Абразивдүү тазалагычтардан же эриткичтерден алыс болуңуз, анткени алар финишке зыян келтириши мүмкүн.
- Майлоо: Periodically apply a silicone-based lubricant to the keyway and latch bolt to maintain smooth operation. Do not use oil-based lubricants.
- Бурамаларды бекемдөө: Check mounting screws periodically and tighten if they become loose.
7. Кыйынчылыктарды
If you encounter issues with your Kwikset 780 Deadbolt, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Key does not turn or is difficult to turn. | Misaligned components, dirty keyway, worn key. | Check alignment of interior and exterior components. Clean keyway and lubricate with silicone spray. Try a new key if available. |
| Дедболт толук узартылбайт же артка тартылбайт. | Misaligned strike plate, door frame obstruction, loose screws. | Adjust strike plate. Check for obstructions in the door frame. Tighten all mounting screws. |
| SmartKey кайра ачкыч ишке ашпай калды. | Current key not fully inserted or turned 90 degrees, SmartKey tool not fully inserted, incorrect new key. | Ensure current key is fully inserted and turned exactly 90 degrees. Insert SmartKey tool firmly until a click is felt. Ensure the new key is a Kwikset key. Repeat the process carefully. |
8. Техникалык шарттар
- Бренд: Kwikset
- Модель номери: 97800-194
- Кулпу түрү: Keyed One Side (Single Cylinder Deadbolt)
- Материал: Бронза
- Бүтүрүү: Венециялык коло
- Эшик калыңдыгы: 1-3/8" дан 1-3/4" га чейин (35мм - 44мм)
- Adjustable Backset: 2-3/8" же 2-3/4" (60мм же 70мм)
- Коопсуздук өзгөчөлүктөрү: SmartKey Re-key Technology, Pick Resistant, Bump Proof
- Тастыктоо: BHMA/ANSI Grade 2
- Элементтин өлчөмдөрү (L x W x Y): 4.67 x 3.92 x 3.07 дюйм
- Элемент Салмагы: 1 pound (approximately 16 ounces)
9. Кепилдик жана колдоо
Kwikset products are backed by a comprehensive warranty. The Kwikset 780 Deadbolt includes a Өмүр бою механикалык жана бүтүрүү кепилдик.
For detailed warranty information, product support, or to contact customer service, please visit the official Kwikset webсайтка же сатып алууда берилген байланыш маалыматына кайрылыңыз.
Сиз да зыярат кылсаңыз болот Amazon'догу Kwikset дүкөнү көбүрөөк өнүмдөр жана маалымат үчүн.
