Lithonia Lighting Fluorescent Troffer Instruction Manual

Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your Lithonia Lighting 2GT8 2 U316 A12 MVOLT GEB10IS Fluorescent Troffer. Please read all instructions carefully before proceeding with installation or use. Retain this manual for future reference.

Коопсуздук маалыматы

• Арматураны орнотуудан, тейлөөдөн же тазалоодон мурун ар дайым автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Электр тогуна урунбоо үчүн шаймандын жерге туура туташтырылганын текшериңиз.
• Күйүүчү материалдардын жанына орнотууга болбойт.
• Орнотуу жана тейлөө учурунда тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.

Жайгашуу

Орнотуу

The Lithonia Lighting 2GT8 troffer is designed for recessed installation in grid ceilings. Follow these general steps:

1. Шыптын ачылышын даярдаңыз: Ensure the ceiling grid opening matches the fixture dimensions (24 x 24 inches).
2. Зымдар: Route electrical supply wires to the fixture location. Connect the fixture's wiring to the building's electrical system according to local codes. Ensure proper grounding.
3. Монтаждоо: Carefully lift the troffer into the ceiling grid opening. The fixture is designed for lay-in grid installation. Secure the fixture to the grid using appropriate clips or hangers as required by local codes.
4. Лампаны орнотуу: Install two (2) U31W T8 fluorescent bulbs (not included) into the fixture's sockets. Ensure bulbs are seated correctly.
5. Линзаны орнотуу: Close and secure the hinged steel door with the acrylic patterned lens.

Refer to the mounting data and dimensions diagram below for detailed measurements and installation guidance.

Image: A technical diagram illustrating the mounting data and dimensions of the Lithonia Lighting 2GT8 troffer. It shows various measurements in inches and millimeters for the fixture's depth, width, and mounting points, along with a small diagram of a lay-in grid installation.

Иштеп жатат

Негизги операция

Once installed and wired correctly, the Lithonia Lighting 2GT8 troffer operates by a standard wall switch connected to the electrical circuit. Ensure the correct T8 fluorescent bulbs are installed before restoring power.

Лампаны алмаштыруу

To replace bulbs:

1. Кубатты өчүрүү: Автоматтык өчүргүчтөгү лампага берилүүчү электр кубатын өчүрүңүз.
2. Open Lens: Unlatch and open the hinged steel door to access the bulbs.
3. Эски лампаларды алып салуу: Carefully twist and remove the old T8 fluorescent bulbs.
4. Install New Bulbs: Insert new U31W T8 fluorescent bulbs, ensuring they are securely seated in the sockets.
5. Close Lens: Close and secure the hinged steel door.
6. Күчтү калыбына келтирүү: Электр өчүргүчтү кайра күйгүзүңүз.

Техникалык тейлөө

Тазалоо

Regular cleaning helps maintain optimal light output and appearance.

• Кубатты өчүрүү: Тазалоодон мурун ар дайым электр кубатын өчүрүңүз.
• Таза сырткы: Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
• Таза линза: The acrylic patterned lens can be cleaned with a mild, non-abrasive cleaner specifically designed for plastics. Open the hinged door for easier access.
• Ensure all parts are dry before restoring power.

Объективди алмаштыруу

The hinged steel door allows for easy replacement of the acrylic patterned lens if it becomes damaged or discolored. Contact Lithonia Lighting customer support for replacement lens options.

Проблемаларды чечүү

If you encounter issues with your fluorescent troffer, refer to the following common problems and solutions:

• Жарык күйбөйт:
  • Электр өчүргүч өчүрүлгөнүн текшериңиз.
  • Verify that bulbs are correctly installed and not faulty.
  • Бардык зымдарды туташтыруу коопсуз экенин текшериңиз.
• Жарык жыпылыктары:
  • Replace old or faulty fluorescent bulbs.
  • Check for loose bulb connections.
  • A failing ballast may cause flickering; consult a qualified electrician for inspection.
• Кыскартылган жарык чыгаруу:
  • Clean the lens and bulbs to remove dust and debris.
  • Bulbs may be nearing the end of their lifespan and require replacement.

For persistent issues, contact customer support or a qualified electrician.

Техникалык шарттар

Key specifications for the Lithonia Lighting 2GT8 2 U316 A12 MVOLT GEB10IS Fluorescent Troffer:

For additional technical details, refer to the product datasheet below.

Image: A section of the Lithonia Lighting 2GT8 product datasheet, detailing features, specifications, and ordering information for various configurations of the 2GT8 series troffer, including the 2GT8 2 U316 A12 MVOLT GEB10IS model.

Кепилдик маалымат

This Lithonia Lighting product is covered by a 3 жылдык чектелген кепилдик. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official warranty documentation provided with your purchase or visit the Lithonia Lighting webсайт.

Кардарларды колдоо

For technical assistance, replacement parts, or warranty claims, please contact Lithonia Lighting customer support.

• Өндүрүүчү: Acuity Brands Lighting Inc.
• Онлайн колдоо: расмий сапар Lithonia Lighting Store көбүрөөк маалымат жана ресурстар үчүн.