HID EntryProx Proximity Reader

1. Киришүү

The HID EntryProx Proximity Reader (Model 4045CGNU0) is a standalone access control unit designed for secure entry management. This device combines a proximity card reader with a keypad, offering versatile access methods for single or dual-door applications. It is ideal for managing access for regular users via key fobs or cards, and for occasional users or visitors via keypad codes.

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EntryProx unit, ensuring optimal performance and security.

Сүрөт 1: Алдыңкы view of the HID EntryProx Proximity Reader, showing the numeric keypad and the HID logo.

2. Орнотуу жана орнотуу

Proper installation is crucial for the reliable operation of your EntryProx unit. It is recommended that installation be performed by a qualified technician.

2.1. Агрегатты монтаждоо

1. Select a suitable mounting location near the entry point, ensuring it is protected from extreme weather conditions if installed outdoors.
2. Use appropriate screws and anchors to securely fasten the unit to the wall or door frame.
3. Ensure sufficient space for wiring connections at the back of the unit.

2.2. Зымдарды туташтыруу

The EntryProx unit requires connection to a power supply and an electronic door strike or magnetic lock. Refer to the wiring diagram provided with your product packaging for specific terminal connections.

• Электр камсыздоо: Connect the unit to a stable DC power source (typically 12-24V DC). Ensure correct polarity.
• Door Strike/Lock: Connect the output relays of the EntryProx to your electronic door strike or magnetic lock. The unit supports both normally open (NO) and normally closed (NC) configurations.
• Көмөкчү киргизүүлөр/чыгаруулар: If applicable, connect any auxiliary inputs (e.g., door position sensor, request-to-exit button) or outputs (e.g., alarm) as per your system design.

2.3. Initial Power-Up and Programming

Once wired, apply power to the unit. The unit will perform a self-test. Refer to the separate programming guide (often included with the product) for detailed instructions on:

• Adding and deleting user credentials (proximity cards/fobs).
• Setting up keypad access codes.
• Configuring access modes (e.g., card only, code only, card + code).
• Adjusting relay timings and other system parameters.

3. Иштөө нускамалары

The EntryProx unit provides two primary methods for gaining access:

3.1. Proximity Card/Fob Access

To gain access using a registered proximity card or fob:

1. Present your valid proximity card or fob within close range (typically 1-3 inches) of the reader's lower section.
2. A successful read will be indicated by an audible beep and/or a green LED illumination. The door strike will momentarily activate, allowing entry.
3. An invalid card/fob will typically result in a different audible tone or a red LED, indicating denied access.

3.2. Keypad Code Access

To gain access using a registered keypad code:

1. Enter your valid personal identification number (PIN) using the numeric keypad.
2. Press the '#' key (or designated enter key) after entering the PIN.
3. A successful code entry will be indicated by an audible beep and/or a green LED illumination. The door strike will momentarily activate, allowing entry.
4. An incorrect code will typically result in a different audible tone or a red LED, indicating denied access.

4. Техникалык тейлөө

The HID EntryProx unit is designed for low maintenance. However, periodic checks can help ensure its longevity and reliable performance.

• Тазалоо: Gently wipe the surface of the unit with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the keypad and casing.
• Кабелдик текшерүү: Periodically inspect all wiring connections for any signs of wear, corrosion, or loose connections. Ensure all cables are securely fastened.
• Функционалдык тест: Regularly test the unit's functionality by using a valid card/fob and a valid code to ensure proper access grant and door strike activation.
• Экологиялык текшерүү: Ensure the unit remains within its specified operating temperature and humidity ranges. Protect it from direct water exposure if not rated for outdoor use.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your EntryProx unit.

If problems persist after attempting these solutions, contact HID technical support or a qualified security system professional.

6. Техникалык шарттар