1. Киришүү
Thank you for choosing the BAL 29015B Side Wind Trailer Tongue Jack. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new trailer tongue jack. Please read this manual thoroughly before installation and use, and retain it for future reference.
The BAL 29015B is designed to provide reliable support and lifting for trailer tongues, featuring a robust construction and a 1,000 lb load capacity. Its side-wind mechanism allows for convenient operation.
2. Коопсуздук маалыматы
Always prioritize safety when working with trailer equipment. Failure to follow these safety guidelines may result in personal injury or property damage.
- Бардык нускамаларды окуңуз: Understand all instructions and warnings before installing or operating the jack.
- Салмак сыйымдуулугу: Do not exceed the maximum load capacity of 1,000 lbs. Overloading can cause failure and injury.
- Туруктуу бети: Домкратты ар дайым бекем, тегиз жерде иштетиңиз. Кыймылга жол бербөө үчүн чиркегич дөңгөлөктөрүнө дөңгөлөктөрдү бекиткичтерди колдонуңуз.
- Туура колдоо: Ensure the jack is properly seated and stable before applying load.
- Аймакты тазалоо: Иштөө учурунда колдоруңузду, буттарыңызды жана кийимдериңизди кыймылдуу бөлүктөрдөн алыс кармаңыз.
- Текшерүү: Regularly inspect the jack for damage, wear, or loose fasteners. Do not use if damaged.
- Балдар жана үй жаныбарлары: Балдарды жана үй жаныбарларын жумуш аймагынан алыс кармаңыз.
3. Пакеттин мазмуну
Таңгактан чыгарганда бардык компоненттер бар экенин жана бузулбаганын текшериңиз:
- BAL 29015B Side Wind Trailer Tongue Jack - 1,000 lbs.
4. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | 29015B |
| Жүктөө жөндөмдүүлүгү | 1,000 фунт |
| Максималдуу көтөрүү бийиктиги | 21.5 дюйм |
| Элемент Салмагы | 10 фунт |
| Продукциянын өлчөмдөрү (L x W x Y) | 12 x 6 x 3 дюйм |
| Түс | Кара, күмүш |
| Стиль | Tongue Jack (Side Wind) |
5. Орнотуу (Орнотуу)
This section outlines the general steps for installing the BAL 29015B Side Wind Trailer Tongue Jack. Specific trailer designs may require slight variations.
- Трейлерди даярдоо: Park the trailer on a firm, level surface. Engage the trailer's parking brake and chock the wheels to prevent any movement. If replacing an existing jack, ensure the trailer tongue is safely supported by a separate jack stand or blocks before removal.
- Джекти жайгаштырыңыз: Align the mounting plate of the BAL 29015B jack with the mounting holes on your trailer's tongue. The side-wind handle should be positioned for convenient access and operation.
- Джекти коопсуздандырыңыз: Insert appropriate bolts (not included, typically 3/8" or 1/2" grade 5 or higher) through the mounting holes of the jack and the trailer tongue. Secure with washers and nuts, tightening them firmly. Ensure all fasteners are torqued to the manufacturer's specifications for your trailer.
- Акыркы текшерүү: Once installed, visually inspect the jack to ensure it is securely mounted and all components are properly aligned.
6. Иштөө нускамалары
Follow these steps for safe and effective operation of your BAL 29015B Trailer Tongue Jack:
- Lowering the Jack: To lower the jack, turn the side-wind handle counter-clockwise. The inner tube will extend, lowering the trailer tongue.
- Джекти көтөрүү: To raise the jack, turn the side-wind handle clockwise. The inner tube will retract, raising the trailer tongue.
- Supporting the Trailer: Once the desired height is achieved, ensure the jack is stable. For extended periods of parking, it is recommended to use additional jack stands for stability and to relieve pressure on the jack.
- Retracting for Travel: Before moving the trailer, fully retract the jack by turning the handle clockwise until the inner tube is completely raised. This prevents damage to the jack and ensures adequate ground clearance during transport.
7. Техникалык тейлөө
Regular maintenance will prolong the life and ensure the safe operation of your tongue jack.
- Майлоо: Periodically lubricate the internal screw mechanism and gears with a good quality grease. This can typically be done via a grease zerk if present, or by disassembling the top cap if accessible.
- Тазалоо: Keep the outer and inner tubes clean and free of dirt, mud, and debris. Wipe down the jack after use, especially if exposed to harsh conditions.
- Текшерүү: Before each use, inspect the jack for any signs of damage, corrosion, bent components, or loose fasteners. Pay close attention to welds and the integrity of the mounting points.
- Сактагыч: When not in use, store the jack in a clean, dry environment to prevent rust and corrosion.
8. Кыйынчылыктарды
This section addresses common issues you might encounter with your trailer tongue jack.
- Jack is Hard to Crank:
- Себеби: Lack of lubrication, dirt in mechanism, or excessive load.
- Чечим: Lubricate the internal screw and gears. Clean the inner and outer tubes. Ensure the load does not exceed 1,000 lbs.
- Jack Does Not Extend/Retract:
- Себеби: Internal mechanism jammed or damaged.
- Чечим: Inspect for visible obstructions. If the mechanism is damaged, the jack may need repair or replacement. Do not force the handle.
- Jack Wobbles or is Unstable:
- Себеби: Loose mounting bolts, uneven ground, or damaged jack foot.
- Чечим: Check and tighten all mounting bolts. Move the trailer to a firm, level surface. Inspect the jack foot for damage and replace if necessary.
9. Кепилдик жана колдоо
For specific warranty information regarding your BAL 29015B Side Wind Trailer Tongue Jack, please refer to the documentation provided at the time of purchase or contact BAL RV Products directly. Keep your proof of purchase for any warranty claims.
For technical support or inquiries, please visit the official BAL RV Products website or contact their customer service department. Contact information can typically be found on the product packaging or their official webсайт.
