1. Киришүү
This manual provides instructions for the proper and safe use of the 3M 381C 100 Grit Aluminum Oxide Fiber Disc. Please read this manual thoroughly before using the product to ensure safe operation and optimal performance. Retain this manual for future reference.
2. Коопсуздук маалыматы
WARNING: Industrial and occupational products are intended for workplace use by trained personnel. Misuse may result in injury, sickness, death, or property damage.
- Бул продуктуну ар дайым тиешелүү ден соолук жана коопсуздук эрежелерине жана стандарттарына (мисалы, АКШ OSHA, ANSI) ылайык тандап жана колдонуңуз.
- 3M тарабынан берилген бардык продукт адабияттарын, колдонуучу көрсөтмөлөрүн, эскертүүлөрдү жана башка чектөөлөрдү караңыз.
- Ensure the user is trained in the proper handling and application of abrasive products.
- Wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, and respiratory protection, as required by the application and workplace safety standards.
- Consult an on-site safety professional, industrial hygienist, or other subject matter expert for product selection and use guidance.
- Do not use this product for consumer applications (e.g., home, personal, recreational/sporting).
Кошумча продукт маалыматы үчүн, баш багыңыз www.3M.com.
3. Продукт бүтүп калдыview
The 3M 381C Fiber Disc is a high-performance abrasive product designed for various grinding and sanding applications. It features a durable fiber backing and aluminum oxide abrasive material, providing effective material removal and a consistent finish.
Figure 1: 3M 381C 100 Grit Aluminum Oxide Fiber Disc. This image displays the 3M 381C 100 Grit Aluminum Oxide Fiber Disc. It is a circular, reddish-brown abrasive disc with a coarse texture, featuring a central arbor hole for mounting onto compatible tools. The disc is designed for grinding and sanding applications.
Негизги өзгөчөлүктөрү:
- Абразивдүү материал: Алюминий оксиди
- Күмүш саны: 100
- Диск диаметри: 4 1/2 дюйм (114.3 мм)
- Курулуш түрү: капталган
- Колдоо: Fiber
- Maximum Operating Speed: 13,300 RPM
4. Орнотуу
- Inspect Disc: Before each use, visually inspect the fiber disc for any signs of damage, cracks, or excessive wear. Do not use damaged discs.
- Select Compatible Tool: Ensure the grinding or sanding tool is compatible with a 4 1/2 inch fiber disc and has a suitable backing pad.
- Монтаждоо: Carefully mount the fiber disc onto the tool's backing pad, ensuring it is centered and securely fastened. Follow the tool manufacturer's instructions for disc attachment.
- Check RPM: Verify that the maximum operating speed of your tool does not exceed the maximum operating speed of the 3M 381C disc (13,300 RPM).
- Коопсуздук шаймандары: Put on all necessary personal protective equipment (PPE) before starting work.
5. Иштөө нускамалары
- Коопсуз жумуш бөлүгү: Иштеп жаткан учурда кыймылга жол бербөө үчүн даярдоо бөлүгүн ар дайым бекем бекитиңиз.
- Start Tool: Turn on the grinding or sanding tool, allowing it to reach full operating speed before making contact with the workpiece.
- Кысым колдонуу: Apply consistent, moderate pressure. Excessive pressure can lead to premature disc wear, heat buildup, and reduced performance.
- Бурчту сактоо: Hold the tool at an appropriate angle to the workpiece, typically between 15-30 degrees, for effective material removal and to prevent gouging.
- Кыймыл: Move the disc smoothly and continuously across the workpiece to ensure even abrasion and prevent localized heat buildup.
- Муздатуу: Allow the disc and workpiece to cool periodically, especially during prolonged use, to prevent overheating.
- Өчүрүү: When finished, lift the disc from the workpiece before turning off the tool.
6. Техникалык тейлөө
- Сактагыч: Store fiber discs in a dry, cool environment, away from direct sunlight and humidity, to maintain their integrity and performance.
- Текшерүү: Regularly inspect discs for wear, glazing, or loading. Replace discs that show significant wear or damage.
- Тазалоо: If a disc becomes loaded with material, it may be possible to clean it using a dressing stick or wire brush, if appropriate for the disc type and application. Always follow safety guidelines when cleaning.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Poor material removal / Slow cutting | Disc is worn, glazed, or loaded; insufficient pressure; incorrect disc for application. | Replace disc; increase pressure slightly; ensure disc grit is appropriate for task. |
| Ашыкча жылуулук топтоо | Excessive pressure; prolonged contact in one area; disc loading. | Reduce pressure; move disc continuously; clean or replace disc. |
| Disc vibration or chatter | Improperly mounted disc; damaged disc; worn backing pad. | Re-mount disc securely; replace damaged disc; inspect and replace backing pad if necessary. |
8. Техникалык шарттар
- Бренд: 3M
- Модел: 381C
- Abrasive Type: капталган
- Абразивдүү материал: Алюминий оксиди
- Күмүш саны: 100
- Диск диаметри: 4 1/2 дюйм (114.3 мм)
- Arbor Hole Diameter: 7/8 дюйм (22.2 мм)
- Колдоочу материал: Fiber
- Максималдуу RPM: 13,300
- Элемент Салмагы: Approximately 0.8 ounces (per disc)
- Продукциянын өлчөмдөрү: 4.5"L x 4.5"W
9. Кепилдик жана колдоо
For specific warranty information regarding 3M industrial products, please refer to the official 3M website or contact 3M customer service directly. 3M stands behind its products and provides support for industrial and occupational customers.
For technical assistance, product inquiries, or safety data sheets, please visit the official 3M website or contact your local 3M representative.
Webсайт: www.3M.com