Weller 8200PKS Universal Soldering Gun Kit Instruction Manual

1. Киришүү

This manual provides essential instructions for the safe and effective use of your Weller 8200PKS Universal Soldering Gun Kit. This kit is designed for various soldering applications, offering dual heat settings of 140 watts and 100 watts. Please read this manual thoroughly before operation to ensure proper usage and to prevent injury or damage.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн электр шаймандарын колдонууда ар дайым негизги коопсуздук чараларын сактаңыз.

• Вентиляция: Use the soldering gun in a well-ventilated area to avoid inhaling fumes from solder and flux.
• Көздү коргоо: Эриген ширетүүнүн же флюстун чачырашынан көзүңүздү коргоо үчүн ар дайым коопсуздук көз айнегин же коргоочу көз айнекти тагыныңыз.
• Күйүк коркунучу: The soldering tip and surrounding metal parts become extremely hot during operation. Avoid contact with skin and flammable materials. Allow the tool to cool completely before handling or storing.
• Электр коопсуздугу: Электр шнурунун жакшы абалда экенин текшериңиз жана шайманды күйүк абалда колдонбоңузamp or wet conditions. Do not modify the plug.
• Милдеттик цикл: To prevent overheating and prolong tool life, operate the soldering gun for a maximum of 1 minute ON, followed by a minimum of 4 minutes OFF. Exceeding this duty cycle can damage the tool.
• Сактагыч: Куралды кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.
• UL & cUL Listed: This product is UL & cUL listed, indicating compliance with safety standards.

3. Пакеттин мазмуну

Your Weller 8200PKS Soldering Gun Kit includes the following items:

• Weller 8200 Soldering Gun (120V, 140/100W)
• Ширетүүчү кеңеш
• Smoothing Tip
• Кесүү үчүн кеңеш
• Coil of Lead-Free Solder
• Flux Brush
• Soldering Aid Tool
• Сактоочу куту

Image 1: The Weller 8200PKS Soldering Gun Kit, including the gun, various tips, solder, and other accessories, neatly organized within its black plastic storage case.

4. Орнотуу

1. Кеңеш тандаңыз: Choose the appropriate tip for your task (soldering, smoothing, or cutting). The kit includes different tips for various applications.
2. Install the Tip: Ensure the soldering gun is unplugged and cool. Loosen the two screws at the front of the gun. Insert the desired tip into the two holes, ensuring it is seated firmly. Tighten the screws to secure the tip.
3. Иш аянтын даярдоо: Work on a heat-resistant surface in a well-ventilated area. Have your solder, flux, and any necessary cleaning tools ready.

Сүрөт 2: Жакын план view of the front of the Weller soldering gun, highlighting the two metal tubes where the soldering tips are inserted and secured with screws.

5. Иштөө нускамалары

1. Күйгүзүү: Plug the soldering gun into a standard 120-volt AC outlet.
2. Жылуулук жөндөөсүн тандоо: The gun features a dual-heat trigger.
   • Press the trigger partially (first position) for 100 watts of heat.
   • Press the trigger fully (second position) for 140 watts of heat.
   The gun heats up rapidly, typically within six seconds. A light illuminates the work area when the trigger is pressed.
3. ширетүү:
   • Apply the hot tip to the joint to be soldered, ensuring both surfaces are heated simultaneously.
   • Feed solder onto the heated joint, not directly onto the tip. The solder should flow smoothly and evenly.
   • Remove the solder wire, then remove the soldering gun. Allow the joint to cool undisturbed.
4. Duty Cycle Adherence: Remember to observe the 1 minute ON / 4 minutes OFF duty cycle to prevent damage to the tool.
5. Өчүрүү: Release the trigger to turn off the heating element. Unplug the tool from the outlet when finished or when not in use.

Image 3: The Weller 8200PKS Soldering Gun, showing its pistol grip design, red trigger for dual heat control, and the integrated work light.

6. Техникалык тейлөө

• Кеңеш тазалоо: Regularly clean the soldering tip with a damp sponge or brass wool to remove excess solder and oxidation. A clean tip ensures efficient heat transfer.
• Кеңешти алмаштыруу: Tips will wear out over time. Replace them when they become pitted, corroded, or no longer hold solder effectively. Ensure the gun is unplugged and cool before replacing tips.
• Жалпы тазалоо: Keep the body of the soldering gun clean and free of dust and debris. Use a dry cloth for cleaning.
• Шнур текшерүү: Periodically inspect the power cord for any signs of damage. Do not use the tool if the cord is frayed or damaged.

7. Кыйынчылыктарды

8. Техникалык шарттар

• Модел: 8200PKS
• Бренд: Weller
• Кубат булагы: Электр зымдары
• Тtage: 120 вольт
• Ватtage: 140 Ватт (Жогорку), 100 Ватт (Төмөн)
• Жылытуу убактысы: Болжол менен 6 секунд
• Жогорку температура рейтинги: 1100 градус Фаренгейт
• туткасы материалы: Rubber or Acrylonitrile Butadiene Styrene (ABS)
• Элемент Салмагы: 3 фунт
• Корндун узундугу: 6 Фут
• Өзгөчөлүктөр: Dual Heat, Work Light, Durable
• Сертификаттар: UL & cUL тизмеленген
• Камтылган компоненттер: Soldering Gun, Soldering Iron Tips (Soldering, Smoothing, Cutting), Flux, Lead-free Solder, Soldering Aid Tool, Storage Case

9. Кепилдик жана колдоо

The Weller 8200PKS Universal Soldering Gun Kit comes with a 7 жылдык кепилдик. For warranty claims, technical support, or to purchase replacement parts and accessories, please contact Weller customer service.

Visit the official Weller webБайланыш маалыматы жана кошумча ресурстар үчүн сайт: www.weller-tools.com