1. Киришүү
This manual provides essential instructions for the proper installation, operation, and maintenance of your SWIMLINE HYDROTOOLS 50050 Premium Solar Reel System. Designed for above-ground swimming pools, this system facilitates efficient management of your solar blanket, helping to optimize pool temperatures and reduce water evaporation. Please read these instructions thoroughly before assembly and use to ensure safe and effective operation.
2. Коопсуздук маалыматы
- Always follow local safety regulations and guidelines for swimming pool equipment.
- Колдонуудан мурун бардык компоненттердин бекем бекитилишин текшериңиз.
- Keep children and pets away from the reel system during operation to prevent injury.
- Do not attempt to modify the product in any way not described in this manual.
- Exercise caution when handling the solar cover, especially when wet, as it can be heavy.
3. Пакеттин мазмуну
The SWIMLINE HYDROTOOLS 50050 Solar Reel System package includes the following components:
- Solar Reel Mechanism (end supports with crank)
- All necessary straps and hardware for attaching the solar blanket.
- Instruction Manual
NOTE: The tube kit (aluminum rods) for the reel is NOT included and must be purchased separately to match your pool size.

Figure 1: Components of the SWIMLINE HYDROTOOLS 50050 Solar Reel System, including end supports, straps, and hardware. The tube kit is sold separately.
4. Compatibility (Tube Kit Selection)
To ensure proper function and durability, select the appropriate tube kit based on your pool size and solar cover weight:
- For Standard Weight Covers:
- Pools up to 12 feet across: Use 3-inch tube kit 51120.
- Pools up to 16 feet across: Use 3-inch tube kit 51160.
- Pools up to 20 feet across: Use 3-inch tube kit 51200.
- Pools up to 24 feet across: Use 3-inch tube kit 51240.
- For Heavy-Weight Covers:
- Pools up to 16 feet across: Use 4-inch tube kit 51164.
- Pools up to 20 feet across: Use 4-inch tube kit 51204.
- Pools up to 28 feet across: Use 4-inch tube kit 51284.
5. Орнотуу жана орнотуу
The SWIMLINE HYDROTOOLS 50050 features a socket-mountable design for straightforward installation. Follow these general steps:
- Assemble the Tube Kit: If your tube kit comes in sections, connect them according to the tube kit's specific instructions to achieve the desired length for your pool.
- Attach Reel Ends: Securely attach the solar reel mechanisms (end supports) to each end of the assembled tube kit using the provided hardware. Ensure they are tightly fastened.
- Mount the System: Position the assembled reel system at one end of your above-ground pool. The socket-mountable design allows for easy placement on the pool's top rail or deck, depending on your pool's structure.
- Attach Straps to Tube: Fasten the provided straps to the tube kit at regular intervals. These straps will connect the solar cover to the reel.
- Connect Solar Cover: Lay your solar cover flat on the pool surface. Attach the clips on the straps to the edge of your solar cover. Ensure even spacing and secure attachment to prevent tearing or uneven rolling.

Figure 2: The solar reel system installed on an above-ground pool, demonstrating its socket-mountable design and connection to the solar cover.
Орнотуу боюнча видео көрсөтмө:
Video 1: General installation steps for a pool cover reel system on an above-ground pool. This video demonstrates the assembly and attachment process for a similar product type.
6. Иштөө нускамалары
- To Remove the Solar Cover: Turn the crank handle on the reel system clockwise (or counter-clockwise, depending on setup) to smoothly roll the solar cover onto the tube. Ensure the cover rolls evenly to prevent wrinkles or damage.
- To Deploy the Solar Cover: Gently pull the leading edge of the solar cover across the pool surface. The reel system will unwind, allowing the cover to spread out. Guide the cover to ensure it lays flat and covers the entire pool surface.
- After rolling up the cover, you can detach the reel system from the pool edge and move it to a storage area if desired, thanks to its portable design (if applicable to your specific tube kit with wheels).
7. Техникалык тейлөө
- The reel system features a durable, non-corrosive construction, requiring minimal maintenance.
- Бардык бекиткичтерди жана туташууларды мезгил-мезгили менен текшерип, алардын бекем жана коопсуз экенине ынаныңыз.
- Clean the reel system components with mild soap and water as needed to remove dirt or debris.
- During off-season storage, clean and dry all components thoroughly before storing in a cool, dry place away from direct sunlight.
8. Кыйынчылыктарды
- Cover not rolling smoothly: Check for tangled straps, uneven attachment of the cover to the straps, or debris obstructing the reel mechanism. Ensure the tube kit is properly aligned and not bent.
- Reel system feels unstable: Verify that the socket mounts are securely attached to the pool's top rail or deck. Ensure all screws and bolts are tightened.
- Straps detaching from cover: Re-secure the clips to the solar cover. Consider reinforcing the attachment points on the cover if repeated detachment occurs.
9. Техникалык шарттар
| Модель номери: | 50050 |
| Продукциянын өлчөмдөрү: | 7.91 x 2.17 x 1.69 inches (packaging dimensions, actual assembled size varies with tube kit) |
| Элемент Салмагы: | 5.41 pounds (reel system only) |
| Материал: | Non-corrosive construction |
| Шайкештик: | Designed for above-ground swimming pools; requires separate tube kit based on pool width. |
10. Кепилдик жана колдоо
The SWIMLINE HYDROTOOLS 50050 Solar Reel System comes with a Өндүрүштүк кемчиликтерге каршы 1 жылдык кепилдик. For customer service or warranty claims, please contact Swimline customer support. Our team in New York, USA, designs, tests, and distributes our products with a commitment to quality and customer satisfaction.





