1. Киришүү
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ergotron LX Monitor Arm. The LX Monitor Arm is designed to enhance your workspace by providing flexible and ergonomic positioning for a single flat, curved, or ultrawide computer monitor.
It supports monitors up to 34 inches in diagonal size and weighing between 7 to 25 pounds. The arm is compatible with VESA mounting patterns of 75x75mm and 100x100mm.
Figure 1.1: Ergotron LX Monitor Arm with a monitor attached, showcasing its design and VESA mount compatibility.
2. Кутуда эмне бар
Орнотууну баштоодон мурун, төмөндө көрсөтүлгөн бардык компоненттердин пакетте бар экенин текшериңиз.
- LX Desk Mount LCD Monitor Arm
- Кеңейтүү колу
- Desk Clamp база
- Grommet mount base
- 7 дюймдук таякча
- Required hardware and tools (Allen wrenches, screws)
Figure 2.1: Contents of the Ergotron LX Monitor Arm package.
3. Орнотуу жана орнотуу
The Ergotron LX Monitor Arm offers two primary mounting options: a desk clamp and a grommet mount. Choose the option that best suits your desk type and preferences.
3.1. Desk Clamp Орнотуу
Стол clamp attaches to desk surfaces ranging from 0.4 to 2.4 inches (1 to 6 cm) thick. Ensure the clamp is securely fastened to a stable part of your desk.
3.1-сүрөт: Үстөл клamp орнотуу мисample.
3.2. Grommet Mount Installation
For desks with a surface hole, the grommet mount can be used. This option provides a more integrated look and attaches through a surface hole to desks up to 2.25 inches (5.7 cm) thick.
3.2-сүрөт: Үстөл клamp and grommet mount thickness requirements.
3.3. Мониторду орнотуу
The monitor arm supports VESA mounting patterns of 75x75mm and 100x100mm. Carefully align your monitor's VESA holes with the mounting plate on the arm and secure it using the provided screws.
Note: It is recommended to attach the monitor to the arm before mounting the arm to the desk, or to have assistance when attaching the monitor if the arm is already mounted.
4. Монитор колунун иштеши
The LX Monitor Arm provides extensive adjustability to achieve optimal ergonomic positioning for your display.
4.1. Бийиктигин тууралоо
The arm allows you to raise your monitor up to 17.3 inches (43.9 cm) above your worksurface, with 13 inches (33 cm) of vertical lift. To adjust the height, gently push or pull the monitor to the desired vertical position. The arm's constant force technology will hold it in place.
Сүрөт 4.1: Монитордун бийиктигин тууралоо.
4.2. Tilt and Rotation
The monitor can be tilted up to 75 degrees (40° back, 35° forward) and rotated 360 degrees. This allows for easy switching between landscape and portrait orientations and finding the perfect viewбурч.
Figure 4.2: Demonstrating the arm's extension capabilities.
4.3. Кабелдик башкаруу
Integrated cable management channels are provided along the arm to route and conceal monitor cables, contributing to a cleaner and more organized workspace.
5. Техникалык тейлөө
The Ergotron LX Monitor Arm is designed for durability and requires minimal maintenance.
- Тазалоо: жумшак колдонуу, damp cloth to wipe down the arm. Avoid abrasive cleaners or solvents that could damage the finish.
- Мезгилдүү текшерүүлөр: Periodically check all screws and mounting points to ensure they remain tight and secure.
- Майлоо: The arm's internal mechanisms are designed for maintenance-free operation and do not require lubrication.
6. Кыйынчылыктарды
If you encounter issues with your LX Monitor Arm, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Monitor sags or slowly droops. | Tension setting is too low for the monitor's weight. | Locate the tension adjustment screw on the arm (often near the pivot point or base). Use the provided Allen wrench to increase the tension. Turn clockwise to increase tension for heavier monitors. Adjust incrementally until the monitor holds its position firmly. |
| Кол кыймылдоого өтө катуу. | Tension setting is too high. | Turn the tension adjustment screw counter-clockwise to decrease tension. |
| Monitor wobbles excessively. | Loose mounting points or desk clamp/grommet. | Үстөлдүн clamp or grommet mount is securely tightened to the desk. Check that the VESA mounting screws attaching the monitor to the arm are tight. |
| Arm does not reach desired position. | Physical limitations of the arm or incorrect setup. | Review the installation steps to ensure the arm is correctly positioned on the desk. The arm has a maximum extension; ensure your desired position is within its range. |
7. Техникалык шарттар
Detailed specifications for the Ergotron LX Monitor Arm:
- Модель номери: 45-241-026
- Бренд: Ergotron
- Түсү: Жылтыратылган алюминий
- Материал: Металл
- Элемент Салмагы: 7.92 фунт (3.59 кг)
- Продукциянын өлчөмдөрү (LxWxH): 18 x 10.6 x 6.93 дюйм (45.7 x 26.9 x 17.6 см)
- Шайкеш түзмөктөр: Мониторлор
- Экрандын өлчөмү шайкештиги: Диагоналы 34 дюймга чейин
- Салмак сыйымдуулугу: Салмагы 7төн 25 фунтка чейин (3.2ден 11.3 кгга чейин)
- VESA шайкештиги: 75x75мм, 100x100мм
- Кыймыл түрү: Артикуляциялоо
- Монтаж түрү: Үстөлгө орнотуу (Стол үстөлү)amp же Громмет)
- Вертикалдуу көтөрүү: 13 дюйм (33 см)
- Monitor Extension: 25.6 дюймга чейин (65 см)
- Жантайма диапазону: 75 degrees (40° back, 35° forward)
- Айлануу: 360 градус
- UPC: 698833011463
8. Кепилдик жана колдоо
Ergotron stands behind the quality of its products.
- Кепилдик: The Ergotron LX Monitor Arm comes with a 10 жылдык кепилдик, узак мөөнөттүү ишенимдүүлүгүн жана жан тынчтыгын камсыз кылуу.
- Техникалык колдоо: For technical assistance or warranty claims, please refer to the official Ergotron webсайтка же кардарларды тейлөөгө кайрылыңыз.
- Кошумча ресурстар:
