Incase Monochrome Slider Case User Manual

1. Продукт бүтүп калдыview

The Incase Monochrome Slider Case provides durable protection for your iPhone 3GS or iPhone 3G. Constructed from hardshell plastic, it features a minimal wall thickness while offering shock absorption and protection against impacts and scratches through interior rubber guardrails.

Негизги өзгөчөлүктөрү

• Жеңил конструкция
• Durable hardshell construction
• Interior rubber guardrails for shock absorption
• Direct access to all device features

Пакеттин мазмуну

• Incase Monochrome Slider Case (CL59233-B)

2. Орнотуу нускамалары

Follow these steps to properly install your Incase Slider Case onto your iPhone 3GS or iPhone 3G.

1. Ишти бөлүп коюңуз: The Incase Slider Case consists of two parts: a top section and a bottom sliding section. Gently slide the bottom section downwards to separate it from the main body of the case.
2. iPhone'ду киргизүү: Carefully place your iPhone 3GS or iPhone 3G into the top section of the case, ensuring it seats correctly and aligns with the cutouts for buttons and ports.
3. Reattach Bottom Section: Slide the bottom section of the case upwards along the rails until it securely clicks into place with the top section. Ensure there are no gaps and the phone is fully enclosed.

3. Иштөө нускамалары

Once installed, the Incase Slider Case allows full functionality of your iPhone 3GS or iPhone 3G.

• Access to Ports and Buttons: The case is designed with precise cutouts, ensuring direct access to the charging port, headphone jack, volume buttons, silent switch, and power button without needing to remove the case.
• Камера функциясы: The camera and flash remain fully operational through the dedicated cutout on the back of the case.
• Docking Compatibility: For docking with certain accessories, the two-piece slider design allows for easy removal of the bottom section, facilitating direct connection to docks that require an unobstructed bottom port.

4. Кароо жана тейлөө

To ensure the longevity and appearance of your Incase Slider Case, follow these care guidelines:

• Тазалоо: Ишти дайыма жумшак менен сүртүп туруңуз, гamp cloth. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the finish.
• Экстремалдуу шарттарды болтурбоо: Корпусту өтө жогорку температурага, узак убакыт бою түз күн нуруна же дат басуучу заттарга дуушар кылбаңыз.
• Текшерүү: Periodically inspect the case for any signs of wear or damage. While durable, severe impacts can compromise its protective integrity.

5. Кыйынчылыктарды

If you encounter any issues with your Incase Slider Case, consider the following common solutions:

• Корпус туура эмес орнотулган: Ensure you have the correct model (iPhone 3GS or iPhone 3G). Verify that the bottom slider section is fully engaged and clicked into place. Remove any debris from the phone or inside the case that might obstruct a proper fit.
• Difficulty Removing Bottom Section: Apply gentle, even pressure when sliding the bottom section off. Avoid excessive force. If it feels stuck, ensure no foreign objects are lodged between the two parts.
• Баскычтар же порттор бөгөттөлгөн: Double-check that your iPhone is correctly seated within the case and aligned with all cutouts. If misalignment occurs, remove the phone and re-install it carefully.

6. Продукттун спецификациялары

7. Кепилдик жана колдоо

Incase products are designed for quality and durability. For specific warranty information regarding your Incase Monochrome Slider Case, please refer to the official Incase webсайтка же түздөн-түз кардарларды колдоо менен байланышыңыз.

Кардарларды колдоо: For further assistance, technical support, or warranty claims, please visit the official Incase support page or contact their customer service department. Contact details can typically be found on the manufacturer's webсайт.

Онлайн ресурстар: Visit the Incase Store on Amazon