Focusrite OctoPre MkII Dynamic Microphone Pre Amp User Manual

Introduction

The Focusrite OctoPre MkII Dynamic is an eight-channel microphone preamplifier with a built-in 24-bit / 96 kHz ADAT output. It serves as a powerful input expansion for Pro Tools systems, other digital audio workstations, analog or digital consoles, and hard disk recorders. This unit is designed to enhance your recording setup by providing high-quality preamplification and versatile digital connectivity.

Figure 1: Focusrite OctoPre MkII Dynamic Microphone Pre Amp - Angled Front View.

This image displays the overall design of the OctoPre MkII Dynamic, showcasing its rack-mountable form factor and the layout of its front panel controls and indicators.

Негизги өзгөчөлүктөрү

• Eight High-Quality Preamps: Features eight award-winning Focusrite microphone preampаман калгандар.
• Integrated Digital Output: Includes an eight-channel 24-bit / 96 kHz ADAT digital output for seamless integration with digital audio interfaces.
• Optimized for Drums: Микрофон алдын алаamps are specifically optimized to handle high input levels, making them suitable for tracking drums.
• Инструмент киргизүүлөрү: Two channels offer high-impedance (Hi-Z) instrument inputs, conveniently located on the front panel for direct connection of guitars and basses.
• Киргизүүнү өлчөө: Each channel is equipped with fast-acting 5-LED input meters for clear visual reference of input levels, helping to prevent clipping.
• Phantom Power: 48V phantom power is available on every channel, switchable in two groups (1-4 and 5-8), for use with condenser microphones.
• Камтылган кысуу: Features VCA-based, feed-forward compressors on each channel, derived from the Focusrite Red 3, with a single dial for control and a 'More' button for aggressive compression.
• Direct Outputs: Provides direct outputs on every channel for routing flexibility, particularly useful in live sound environments.
• Ички саат: Delivers a jitter performance of less than 10 PPM, with a BNC connector for external clock synchronization using JetPLL jitter elimination technology.

Жайгашуу

Пакеттен чыгаруу жана текшерүү

Carefully unpack the OctoPre MkII Dynamic and inspect it for any signs of damage that may have occurred during transit. Retain the packaging materials for future transport or storage.

Агрегатты туташтыруу

The OctoPre MkII Dynamic offers various input and output options for integration into your audio setup.

Figure 2: Focusrite OctoPre MkII Dynamic Rear Panel.

This image shows the rear panel of the OctoPre MkII Dynamic, detailing the power input, Word Clock I/O, Optical ADAT outputs, Line Outputs, and Mic/Line Inputs.

• Кубат туташуу: Connect the supplied AC power cable to the IEC inlet on the rear panel and to a suitable mains power outlet. Ensure the unit is properly earthed.
• Микрофон/Line Киргизүүлөрү: Use XLR cables for microphone connections to inputs 1-8. For line-level signals, use 1/4-inch TRS or TS cables.
• Instrument Inputs (Channels 1 & 2): For instruments like guitars or basses, plug directly into the 1/4-inch DI inputs on the front panel. This bypasses the rear XLR input for these channels.
• ADAT Output: Connect the optical ADAT outputs (Lightpipe) to the ADAT input of your audio interface or digital mixer. The unit provides two mirrored ADAT outputs (44.1/48 kHz) for channels 1-8.
• Сап чыгаруу: Use 1/4-inch TRS or TS cables to connect the individual line outputs (1-8) to an analog mixer or other analog recording equipment.
• Сөз сааты: For synchronization with external digital devices, connect a BNC cable from your master clock to the Word Clock input, or from the Word Clock output to slave devices.

Баштапкы кубаттуулук

Once all connections are made, press the Power button on the front panel to turn on the unit. The power indicator LED will illuminate. Allow a few moments for the unit to initialize.

Иштөө нускамалары

This section details the functions of the front panel controls and indicators.

Figure 3: Focusrite OctoPre MkII Dynamic Front Panel.

Бул сүрөт майда-чүйдөсүнө чейин камсыз кылат view of the OctoPre MkII Dynamic's front panel, highlighting the gain knobs, pad buttons, phantom power switches, compressor controls, and metering section.

Алдыңкы панелдин башкаруу элементтери

• Күчөтүү туткалары (1-8): Adjust the input gain for each microphone/line channel. Rotate clockwise to increase gain.
• Pad Buttons (1-8): Engages a 10dB pad for the corresponding channel, useful for very hot signals like close-miked drums.
• Phantom Power (48V) Switches: Two switches control 48V phantom power for channels 1-4 and 5-8. Press to engage for condenser microphones.
• Instrument Inputs (1 & 2): 1/4-inch jacks for direct connection of high-impedance instruments.
• Compressor Controls (1-8):
  • Compress Knob: A single dial that simultaneously decreases the threshold and increases makeup gain for the VCA-based compressor.
  • More Button: Engages a more aggressive compression mode, doubling the ratio from 2:1 to 4:1 and shifting the threshold range.
  • Compress LED: Illuminates when compression is active.
• Input Meters (1-8): 5-LED ladders display the input level for each channel, indicating signal presence, nominal level, and potential clipping (O/L).
• Sample Rate Select: Buttons to select the desired sample rate (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz) for the ADAT output.
• Sync Source Select: Buttons to choose the clock source: Internal, ADAT, or Word Clock.
• Кубат баскычы: Агрегатты күйгүзөт же өчүрөт.

Using the Compressors

The OctoPre MkII Dynamic features a unique single-dial compressor on each channel. Turning the 'Compress' knob clockwise increases the amount of compression. For a more pronounced and aggressive compression effect, engage the 'More' button. The 'Compress' LED will light up when the compressor is actively reducing the signal's dynamic range.

Синхронизация

For stable digital audio, it is crucial to properly synchronize the OctoPre MkII Dynamic with your other digital devices. Select the desired sample rate using the 'Sample Rate' buttons. Then, choose your sync source: 'Internal' for the OctoPre's own clock, 'ADAT' if receiving clock from an ADAT input, or 'Word Clock' if synchronizing via the BNC Word Clock input.

Техникалык тейлөө

• Тазалоо: Агрегаттын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалагычтарды, эриткичтерди же момдорду колдонбоңуз.
• Вентиляция: Ашыкча ысып кетүүнүн алдын алуу үчүн желдетүү тешиктери бүтөлүп калбаганын текшериңиз.
• Сактагыч: When not in use for extended periods, store the unit in a cool, dry place, ideally in its original packaging.
• Электр кабели: Электр шнурунун бузулган-бузулбаганын дайыма текшерип туруңуз. Бузулган электр шнурун колдонбоңуз.

Проблемаларды чечүү

Техникалык шарттар

• Продукциянын өлчөмдөрү: 24 x 14.2 x 5.2 дюйм
• Элемент Салмагы: 11.3 фунт
• Модель номери: AMS-Focusrite OctoPre MkII Dyanamic
• Каналдардын саны: 8
• Байланыш технологиясы: XLR, 1/4-inch TRS/TS, Optical ADAT, BNC Word Clock
• Колдоого алынган программалык камсыздоо: Windows (general compatibility for DAW integration)
• Шайкеш түзмөктөр: Keyboards, Microphones, Guitars, Basses, Digital Audio Workstations, Analog/Digital Consoles
• Биринчи жеткиликтүү датасы: 15-сентябрь, 2009-жыл
• Өндүрүүчү: Фокусрит

Кепилдик жана колдоо

For detailed warranty information and technical support, please refer to the official Focusrite website or the comprehensive User Guide provided with your product. A digital version of the User Guide is available for download:

Колдонуучунун колдонмосун жүктөп алыңыз (PDF)

Сиз да зыярат кылсаңыз болот Focusrite Store on Amazon кошумча продукт маалымат жана ресурстар үчүн.