Intermatic PF1202T

Тоңуудан коргоо жана эки T104M механизми бар PF1202T аралык башкаруу системасы колдонуучунун колдонмосу

Model: PF1202T

1. Киришүү

The Intermatic PF1202T Control System is designed to manage pool and spa equipment operation, incorporating essential freeze protection. This system features two T104M mechanisms for precise scheduling and an adjustable thermostat to safeguard your equipment against freezing temperatures. It is suitable for installations requiring one or two time switches.

Key features of this control system include:

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: To avoid serious injury or death, always disconnect power at the circuit breaker or fuse box before installing or servicing this control system. Installation and servicing should be performed by a qualified electrician in accordance with all national and local electrical codes.

3. Орнотуу жана орнотуу

3.1. таңгактан чыгаруу

Carefully remove the control system from its packaging. Inspect the unit for any signs of damage during transit. Retain all packaging materials until you have confirmed the unit is in working order.

3.2. Монтаждоо

Mount the control system vertically on a flat, rigid surface using appropriate fasteners. Ensure the mounting location allows for proper ventilation and access for wiring and maintenance. The enclosure is designed for outdoor use.

3.3. Электр зымдары

МААНИЛҮҮ: All wiring must be performed by a qualified electrician and comply with local and national electrical codes. The unit operates at 240 Volts and has a current rating of 17 Amps. Use appropriate gauge wiring for the load. The terminal type is screw-type for secure connections.

Refer to the wiring diagram located inside the control system's door for specific connection details. Ensure all connections are tight and secure before restoring power.

Intermatic PF1202T Control System with open door, showing two time switches and a freeze protection thermostat.

1-сүрөт: Intermatic PF1202T Control System with the front door open. The image displays the internal components, including two yellow time switch mechanisms at the top, each with ON/OFF levers. Below these are two blank cover plates, and on the left side, a black dial for the freeze protection thermostat, labeled with temperature settings from 32°F to 44°F. The inside of the door shows a wiring diagram and product information label.

4. Иштөө нускамалары

4.1. Setting the T104M Time Switches

The PF1202T includes two T104M time switches to control your pool or spa equipment. Each time switch allows for independent scheduling of ON/OFF cycles.

  1. Учурдагы убакытты коюу: Pull out the dial and rotate it clockwise until the current time aligns with the arrow on the mechanism. Push the dial back in.
  2. Set ON/OFF Times: Each time switch comes with ON (green) and OFF (red) trippers. To set an ON time, slide a green tripper onto the dial at the desired ON time. To set an OFF time, slide a red tripper onto the dial at the desired OFF time. Additional trippers can be purchased separately for more complex schedules.
  3. Кол менен жокко чыгаруу: The red lever below each dial allows for manual override. Moving the lever to "ON" or "OFF" will temporarily override the programmed schedule until the next tripper engages. Ensure the lever is in the "AUTO" position for automatic operation.

4.2. Adjusting the Freeze Protection Thermostat

The integrated freeze protection thermostat automatically activates your pump and/or heater when the ambient temperature drops to a critical level, preventing freeze damage to your plumbing and equipment.

5. Техникалык тейлөө

The Intermatic PF1202T Control System requires minimal maintenance. Regular inspection can help ensure long-term reliable operation.

6. Кыйынчылыктарды

This section provides solutions to common issues you may encounter with your PF1202T Control System. For problems not listed here, or if solutions do not resolve the issue, contact a qualified electrician or Intermatic customer support.

КөйгөйМүмкүн себепЧечим
Equipment does not turn ON/OFF at scheduled times.
  • Incorrect time set on dial.
  • Trippers not properly installed or missing.
  • Manual override lever is engaged.
  • Аппаратка кубат жок.
  • Pull out dial and rotate to current time, then push back in.
  • Ensure green (ON) and red (OFF) trippers are securely placed at desired times.
  • Set manual override lever to "AUTO".
  • Ажыраткычты жана электр менен жабдууну текшериңиз.
Freeze protection not activating.
  • Thermostat set point too low.
  • Thermostat sensor obstructed or faulty.
  • Аппаратка кубат жок.
  • Adjust thermostat dial to a higher temperature.
  • Clear any obstructions from the sensor. If still not working, contact support.
  • Ажыраткычты жана электр менен жабдууну текшериңиз.
Агрегаттын күчү жок.
  • Өчүк өчүргүч же күйгүзүлгөн сактагыч.
  • Бошогон зымдар байланышы.
  • Check and reset the circuit breaker or replace the fuse.
  • With power disconnected, inspect and tighten all wiring connections.

7. Техникалык шарттар

Technical specifications for the Intermatic PF1202T Control System:

ӨзгөчөлүкДеталь
БрендIntermatic
МоделPF1202T
Иштөө режимиON-OFF-ON
Учурдагы рейтинг17 Amps
Operating Voltage240 вольт
Байланыш түрүАдатта ачык
Туташтыргыч түрүБурама
ТерминалБурама түрү
Буюмдун өлчөмдөрү L x W x H6 x 12 x 14 дюйм
Circuit Type1-жол
Актуатор түрүPush Button

8. Кепилдик жана колдоо

Intermatic products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Intermatic webсайт.

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Intermatic customer support. Contact information can typically be found on the manufacturer's webсайтында же продуктунун таңгагында.

Тектеш документтер - PF1202T

Preview Intermatic P1161 көчмө бассейн жана спа таймеринин колдонуучусунун колдонмосу - коопсуздук, орнотуу жана GFCI тестирлөөсү
Intermatic P1161 көчмө коопсуздук бассейни жана спа таймеринин толук колдонуучу колдонмосу. Маанилүү коопсуздук көрсөтмөлөрүн, таймерди кантип орнотуу керектигин, кепилдик жөнүндө маалыматты, GFCI түшүндүрмөсүн, мүчүлүштүктөрдү оңдоо боюнча колдонмону жана ай сайын сыноо процедураларын камтыйт.
Preview Intermatic PF1102T/PF1102MT Тоңуудан коргоочу башкаруу элементтери: Орнотуу, иштетүү жана тейлөө боюнча колдонмо
Бассейндер жана спалар үчүн Intermatic PF1102T жана PF1102MT тоңуудан коргоочу башкаруу элементтерин орнотуу, иштетүү жана тейлөө боюнча кеңири колдонмо. Коопсуздук эскертүүлөрүн, зымдардын схемаларын жана мүчүлүштүктөрдү оңдоону камтыйт.
Preview Intermatic PF1112T Pool Equipment Control Installation, Operation & Service Manual
Comprehensive guide for the Intermatic PF1112T Pool Equipment Control, detailing installation, operation, and service. Features include freeze protection for pools and spas, a 24-hour time switch, and safety instructions.
Preview Intermatic P1131 көчмө оор жүк ташуучу бассейн жана спа таймеринин колдонуучунун колдонмосу
Intermatic P1131 көчмө оор жүк ташуучу бассейн жана спа таймеринин колдонуучусунун колдонмосу. Бассейн жана спа жабдууларын ыңгайлуу жана энергияны үнөмдөөчү иштетүү үчүн орнотуу боюнча көрсөтмөлөрдү, коопсуздук эскертүүлөрүн, мүчүлүштүктөрдү оңдоо боюнча көрсөтмөлөрдү жана кепилдик маалыматын камтыйт.
Preview Intermatic PF1102/PF1102M Freeze Protection Control Installation, Operation & Service Manual
Comprehensive installation, operation, and service manual for the Intermatic PF1102 and PF1102M Freeze Protection Controls, designed for pools, spas, and water features. Includes safety instructions, wiring diagrams, troubleshooting, and warranty information.
Preview Intermatic PF1100 Series Freeze Protection Controls: Installation, Operation & Service Manual
Comprehensive guide for Intermatic PF1100 Series Freeze Protection Controls (Models PF1102T, PF1102MT, PF1103MT). Covers installation, operation, safety warnings, troubleshooting, and warranty information for pool and spa equipment.