Introduction
This manual provides instructions for the Kwikset 81247 Deadbolt Screw Pack. This pack contains replacement screws designed for specific Kwikset deadbolt models, ensuring proper installation and functionality. It is intended to assist with the correct identification and application of the included hardware.
Пакеттин мазмуну
Сиздин пакетте бардык компоненттер бар экенин текшериңиз:
- Assorted screws for Kwikset 780, 970, 980, and 980S deadbolts.
Сүрөттүн сүрөттөлүшү: This diagram illustrates the various types of screws included in the Kwikset 81247 Deadbolt Screw Pack. It shows different lengths and head types, including long and short screws, some with full threading and others with pointed tips, all designed for secure deadbolt assembly.
Шайкештик
This screw pack is specifically designed for use with the following Kwikset deadbolt models:
- Kwikset 780 Deadbolt
- Kwikset 970 Deadbolt
- Kwikset 980 Deadbolt
- Kwikset 980S Deadbolt
Орнотуу нускамалары
Setup and Screw Replacement
These instructions cover the general process for replacing or installing screws in compatible Kwikset deadbolts. Always refer to your specific deadbolt's primary installation manual for detailed steps.
- Даярдоо: Ensure the deadbolt is disassembled or partially disassembled as required for screw access.
- Identify Screws: Match the screws from this pack to the corresponding screw holes in your deadbolt assembly. Pay attention to length, thread type, and head style.
- Кыстаруу бурамалар: Carefully insert the correct screws into their designated positions.
- Катуу: Using an appropriate screwdriver (typically Phillips head), tighten the screws until snug. Ашыкча катуулабагыла, as this can strip the threads or damage the deadbolt components.
- Сыноо функциясы: After all screws are in place and tightened, reassemble the deadbolt (if necessary) and test its operation to ensure smooth locking and unlocking.
Техникалык тейлөө
The screws in this pack are designed for durability. Regular maintenance is generally not required for the screws themselves.
- Periodically check that all deadbolt screws remain securely tightened.
- If a screw becomes loose, gently tighten it. Avoid overtightening.
- Do not apply lubricants directly to the screw threads unless specified by the deadbolt's primary manual.
Проблемаларды чечүү
Жалпы маселелер
- Screw Does Not Fit:
Ensure you are using the correct screw from the pack for your specific deadbolt model and location. Refer to your deadbolt's original manual for screw identification.
- Screw Strips:
This usually occurs from overtightening. If a screw head strips, it may need to be carefully extracted and replaced. If the receiving thread strips, professional assistance may be required.
- Deadbolt Malfunctions After Screw Replacement:
Verify that all screws are correctly installed and tightened. Incorrect screw placement or overtightening can impede the deadbolt's internal mechanisms. Re-check the deadbolt's primary installation instructions.
Техникалык шарттар
- Модель номери: 81247-006 (Compatible with 81247-515 screw pack designation)
- Материал: Металл
- Бүтүрүү: Antique Nickel (for compatible deadbolts)
- Шайкештик: Kwikset Deadbolt Models 780, 970, 980, 980S
- Элемент Салмагы: Approximately 1 Pound (for the pack)
- Продукциянын өлчөмдөрү: 1 x 1 x 1 дюйм (упаковка өлчөмдөрү)
Кепилдик жана колдоо
For specific warranty information regarding your Kwikset deadbolt and its components, please refer to the documentation provided with your original deadbolt purchase or visit the official Kwikset webсайт.
For further assistance or technical support, contact Kwikset customer service through their official channels.
