Продукт бүттүview
The Telwin Telmig 170/1 Turbo is a versatile welding machine designed for both FLUX (no gas) and MIG-MAG (gas) welding processes. It offers flexibility for use with various materials including steel, stainless steel, and aluminum. The machine is equipped with thermostatic protection for enhanced safety and durability. It comes with essential MIG-MAG welding accessories and supports a 5 kg wire spool.
Сүрөт: алдыңкы view of the Telwin Telmig 170/1 Turbo welding machine, showing its red and black casing, control panel, wheels, and connected welding cables with torch and earth clamp.
Орнотуу нускамалары
- Пакеттен чыгаруу: Carefully remove the welding machine and all accessories from the packaging. Inspect for any shipping damage.
- Жайгашкан жери: Машинаны тез күйүүчү материалдардан алыс, жакшы желдетилген, туруктуу, тегиз жерге коюңуз.
- Кубат туташуу: Ensure the machine is switched off. Connect the power cable to a suitable 230V single-phase power outlet with a 16A fuse.
- Зым катушкасын орнотуу: Open the wire compartment and install a 5 kg welding wire spool (e.g., steel, stainless steel, or aluminum wire with appropriate diameter). Ensure the wire feeds smoothly through the guide.
- Аксессуар туташуу:
- Connect the MIG Torch (2.5M, part no. 742393) to the designated port on the machine.
- Attach the Toledo 250 Earth Clamp (250A, part no. 712030) to the workpiece.
- For MIG-MAG welding, connect the Argon Cylinder Adapter (part no. 432036) and the Rechargeable Cylinder Pressure Reducer (part no. 722341) to a gas cylinder, then connect the gas hose to the machine.
- Алгачкы текшерүүлөр: Before powering on, double-check all connections for security and proper fit.
Иштөө нускамалары
The Telmig 170/1 Turbo supports both FLUX (gasless) and MIG-MAG (with gas) welding. Select the appropriate mode and settings based on your material and welding requirements.
- Режим тандоо: Choose between FLUX (no gas) or MIG-MAG (gas) welding depending on your wire type and application.
- Материалдык шайкештик: This machine is suitable for welding steel, stainless steel, and aluminum. Ensure you use the correct wire type and diameter for the material being welded.
- Regulation Positions: The machine features 6 regulation positions to adjust the welding current. Start with a lower setting and gradually increase until the desired arc stability and penetration are achieved.
- Wire Diameter Selection:
- Steel Welding Wire: 0.6 - 0.8 mm
- Stainless Steel Welding Wire: 0.8 mm
- Aluminum Welding Wire: 0.8 - 1 mm
- Ширетүү процесси:
- Wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing.
- Машинаны күйгүзүңүз.
- Initiate the arc by pressing the torch trigger. Maintain a consistent travel speed and arc length for optimal results.
- The machine features thermostatic protection, which will automatically shut down the unit if it overheats. Allow it to cool down before resuming operation.
Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө ширетүүчү машинаңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Periodically clean the machine's exterior with a dry cloth. Ensure ventilation openings are free from dust and debris.
- Зым менен камсыздоо системасы: Inspect the wire feed rollers and liner for wear or blockages. Clean or replace as necessary to ensure smooth wire feeding.
- Факел жана Жер Clamp: Check the torch nozzle, contact tip, and earth clamp for wear or damage. Replace consumables as needed. Ensure all connections are tight.
- Кабелдик текшерүү: Regularly inspect all cables (power, torch, earth) for cuts, abrasions, or loose connections. Repair or replace damaged cables immediately.
- Сактагыч: When not in use, store the machine in a dry, clean environment, protected from dust and moisture.
Проблемаларды чечүү
Бул бөлүмдө сиз кабылышы мүмкүн болгон жалпы маселелерди чечүү жолдору каралган.
- Машина күйбөйт:
- Check if the power cable is securely plugged into both the machine and the power outlet.
- Verify that the power outlet is functional and the circuit breaker or fuse (16A) has not tripped.
- Ensure the machine's power switch is in the "ON" position.
- No Arc or Weak Arc:
- Жерди текшерүү clamp connection to the workpiece; ensure it is clean and secure.
- Inspect the welding wire for proper feeding and ensure the contact tip is not clogged or worn.
- Verify that the welding current settings are appropriate for the material thickness.
- For MIG-MAG welding, ensure gas flow is adequate and the gas cylinder is not empty.
- Machine Overheats (Thermostatic Protection Activated):
- The machine has built-in thermostatic protection. If it shuts down, allow it to cool down for a sufficient period (typically 10-15 minutes) before restarting.
- Ensure adequate ventilation around the machine and that cooling vents are not obstructed.
- Reduce the duty cycle or welding current if continuous operation is causing frequent overheating.
- Ширетүүнүн сапаты начар:
- Adjust welding current and wire feed speed settings.
- Даярдоо бөлүгү таза жана дат, боёк же май жок экенин текшериңиз.
- Check for proper gas shielding (for MIG-MAG) and correct torch angle.
Техникалык мүнөздөмөлөр
Detailed specifications for the Telwin Telmig 170/1 Turbo welding machine.
| Параметр | Нарк |
|---|---|
| Singfase Mains Voltage | 230 V |
| Негизги жыштык | 50 / 60 Гц |
| Регламент диапазону | 30 - 160 А |
| Max Current (15%) | 140 А |
| Current at 60% | 80 А |
| Max No-Load Voltage | 31 V |
| Абсорбцияланган максималдуу күч | 5.2 кВт |
| Absorbed Power at 60% | 2.3 кВт |
| Электр кубаты | 16 А |
| Power Factor (cosphi) | 0.9 |
| Regulation Positions | 6 |
| Welding Wire Diameter (Steel) | 0.6 - 0.8 мм |
| Welding Wire Diameter (Stainless Steel) | 0.8 мм |
| Welding Wire Diameter (Aluminum) | 0.8 - 1 мм |
| Коргоо даражасы | IP21 |
| Өлчөмдөрү (L x W x Y) | 80 x 45 x 57 см |
| Салмагы | 37 кг |
| EAN коду | 8004897598352 |
| Модель номери | ТЭ-821054 |
Image: A table illustrating electrical specifications such as voltage, current range, maximum current, and fuse rating for the welding machine.
Image: A table illustrating additional specifications including power factor, number of regulation positions, compatible wire diameters for steel, stainless steel, and aluminum, IP protection rating, dimensions, and weight.
Камтылган аксессуарлар
The Telwin Telmig 170/1 Turbo comes equipped with the following accessories:
- Argon Cylinder Adapter (Part No. 432036)
- MIG Torch 2.5M (Part No. 742393)
- Cable 16 MMQ 1.8M (Part No. 120302)
- Rechargeable Cylinder Pressure Reducer (Part No. 722341)
- Toledo 250 Earth Clamp 250A (Part No. 712030)
Кепилдик жана колдоо
For detailed warranty information, please refer to the warranty card included with your product or contact your authorized Telwin dealer or the manufacturer directly. Support inquiries can be directed to Telwin's official customer service channels, typically found on their webсайт.
