Eiko 48052

Eiko 635B 12V 35W A7275 Incandescent Bulb User Manual

Модель: 48052

1. Продукт бүтүп калдыview

The Eiko 635B is a high-quality 12-volt, 35-watt incandescent light bulb designed for various applications requiring reliable illumination. Featuring a SC Bayonet European (BA20s) base and an SB-35 bulb type, this bulb provides a warm 2700 Kelvin light, ideal for creating a comfortable ambiance. Its robust construction ensures consistent performance and a long service life.

Image of the Eiko 635B 12V 35W A7275 incandescent light bulb.

This image displays the Eiko 635B incandescent light bulb, featuring its clear glass envelope and the BA20s bayonet base. The bulb is designed for 12-volt systems and has a power rating of 35 watts.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before installing or operating the Eiko 635B bulb. Failure to do so may result in electric shock, fire, or personal injury.

  • Өчүрүү: Лампаны орнотуудан, алып салуудан же тазалоодон мурун, ар дайым автоматтык өчүргүчтөн же сактандыргыч кутучасынан жабдууга электр кубатынын берилиши өчүрүлгөнүн текшериңиз.
  • Муздатуу: Allow the bulb to cool completely before handling. Incandescent bulbs can become very hot during operation and cause burns.
  • Туура томtage: Use only with 12-volt power sources. Using incorrect voltage can damage the bulb and the fixture, and pose a fire hazard.
  • Proper Base: Ensure the fixture has a compatible SC Bayonet European (BA20s) base. Do not force the bulb into an incompatible socket.
  • Этияттык менен мамиле кылуу: Avoid touching the glass envelope of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.
  • Жоюу: Колдонулган же сынган лампаларды жергиликтүү эрежелерге ылайык жок кылыңыз.

3. Орнотуу (Орнотуу)

Follow these steps to safely install your Eiko 635B incandescent bulb:

  1. Өчүктү текшерүү: Confirm that the power to the light fixture is completely disconnected.
  2. Түзмөктү текшерүү: Ensure the light fixture is clean, dry, and compatible with a BA20s base and 12-volt, 35-watt bulbs.
  3. Лампаны таңгактан чыгаруу: Carefully remove the new Eiko 635B bulb from its packaging.
  4. Лампаны киргизүү: Align the pins on the bulb's BA20s base with the slots in the fixture's socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not overtighten.
  5. Күчтү калыбына келтирүү: Лампочка бекем орнотулгандан кийин, автоматтык өчүргүчтөгү же сактагыч кутучасындагы лампага электр кубатын кайра бериңиз.
  6. Сыноо: Лампанын туура иштеп жатканын ырастоо үчүн жарык өчүргүчтү күйгүзүңүз.

4. Иштөө нускамалары

The Eiko 635B incandescent bulb operates simply by applying 12 volts of power to its base. It is designed for immediate full brightness upon activation.

  • Жандандыруу: Turn on the switch connected to the light fixture to illuminate the bulb.
  • Өчүрүү: Turn off the switch to extinguish the bulb.
  • Жылуулук: Be aware that incandescent bulbs generate heat during operation. Ensure adequate ventilation around the fixture.

5. Техникалык тейлөө

Minimal maintenance is required for the Eiko 635B bulb. Regular cleaning and timely replacement will ensure optimal performance.

  • Тазалоо: Before cleaning, ensure the bulb is cool and the power is off. Gently wipe the glass envelope with a soft, dry, lint-free cloth to remove dust or smudges. Do not use liquid cleaners directly on the bulb.
  • Алмаштыруу: When the bulb reaches the end of its life, it will cease to illuminate. Follow the installation steps in Section 3 to replace it with a new Eiko 635B (or equivalent) bulb.

6. Кыйынчылыктарды

If your Eiko 635B bulb is not functioning as expected, consider the following common issues and solutions:

КөйгөйМүмкүн себепЧечим
Лампочка күйбөйтNo power to fixture, loose connection, bulb burnt out, incorrect voltage.Check circuit breaker/fuse. Ensure bulb is securely seated. Replace bulb if burnt out. Verify fixture provides 12V.
Лампочка жылтылдайт же күңүртLoose connection, insufficient voltage, faulty fixture wiring.Ensure bulb is tightly screwed/locked. Check voltage supply. Consult a qualified electrician if wiring is suspected.
Лампочка тез күйүп кететКөлөмүtage, excessive vibration, frequent on/off cycling, faulty fixture.Ырды текшерүүtage supply is exactly 12V. Ensure bulb is not subject to excessive vibration. Reduce frequent switching if possible. Inspect fixture for issues.

7. Техникалык шарттар

АтрибутНарк
БрендЭйко
Модель номери48052
Продукт аты635B - 12V 35W A7275
Тtage12 вольт
Ватtage35 Ватт
Лампанын базасыSC Bayonet European (BA20s)
Лампанын түрүSB-35
Түс температурасы2700 Келвин
M.O.L. (Length)2.60 дюйм / 66.0 мм.
Элемент Салмагы0.01 унция
UPC280342803426

8. Кепилдик маалыматы

Eiko products are manufactured to high standards and are typically covered by a limited manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please refer to the original product packaging or the official Eiko webтолук кепилдик маалымат алуу үчүн сайт.

9. Кардарларды колдоо кызматы

For technical assistance, product inquiries, or warranty claims, please contact Eiko customer support through their official website or the contact information provided on your product packaging. When contacting support, please have your product model number (48052) and any relevant purchase information ready.

Eiko Official Webсайт: www.eiko.com (Эскертүү: Бул толтургуч URL. Refer to actual product documentation for the correct webсайт.)

Тектеш документтер - 48052

Preview EIKO LED T8 Linear Tube Installation Instructions
Comprehensive installation instructions for EIKO LED T8 Type B Linear Tube lights, covering safety precautions, maintenance, and detailed wiring diagrams for retrofitting fluorescent luminaires.
Preview EIKO VL1 Series LED Volumetric Troffer Installation Instructions
Comprehensive installation guide for the EIKO VL1 Series LED Volumetric Troffer, covering overview, safety precautions, installation steps, wiring schematics, and sensor installation. Includes power and CCT selection.
Preview EIKO Z10 микротолкундуу мештин эки деңгээлдүү күңүртөтүүчү сенсору, фотоселлди орнотуу боюнча колдонмо
Фотоселл менен EIKO Z10 микротолкундуу эки деңгээлдеги күңүртөтүүчү сенсор үчүн комплекстүү орнотуу көрсөтмөсү, деталдаштырылган спецификациялар, сенсордун камтуусу жана туура орнотуу жана иштетүү үчүн FCC шайкештиги жөнүндө маалымат.
Preview EIKO CSX1 Series LED Commercial Strip Premium Installation Instructions
Comprehensive installation guide for the EIKO CSX1 Series LED Commercial Strip Premium fixtures, covering surface mount, chain mount, and optional accessory installations.
Preview EIKO LED Surface Canopy Square орнотуу нускамалары
Бул документте коопсуздук чараларын, үстүнкү монтаждоону, капталдагы зымдарды, асма монтаждоону, кубаттуулукту тууралоону жана Z10 сенсорун орнотууну камтыган EIKO LED Surface Canopy Square арматура үчүн толук орнотуу көрсөтмөлөрү камтылган.
Preview EIKO SEN5A-ACT Sensor Commissioning Tool: Operation Instructions
User manual for the EIKO SEN5A-ACT handheld sensor commissioning tool. Covers overview, specifications, program compatibility, button functions, parameter settings, and usage instructions for SEN5A-ACT and SEN5A-CT programs.