Power Acoustik BASS-12C

Power Acoustik BASS-12C санарип басс калыбына келтирүү процессорунун колдонуучу колдонмосу

Model: BASS-12C

1. Киришүү

The Power Acoustik BASS-12C is a digital bass restoration processor designed to enhance the low-frequency output of your car audio system. This unit provides precise control over bass frequencies, allowing for customization and optimization of your audio experience. It features balanced inputs and outputs for seamless integration and a remote control for convenient adjustments.

2. Продукциянын өзгөчөлүктөрү

  • Illuminated badge for visual indication.
  • PWM high-headroom power supply ensures stable performance.
  • 27Hz–63Hz parametric bass boost for targeted frequency enhancement.
  • Variable bandwidth adjustment for fine-tuning bass response.
  • Maximum output level: 13.5V.
  • Bass restoration with lighted display and chrome finish.
  • Dash-mount remote control for PFM subsonic filter and bass level adjustments.
  • Balanced inputs for optimal signal integrity.
  • Frequency Response: 10Hz - 100KHz.
  • Total Harmonic Distortion (THD): 0.002%.
  • Signal-to-Noise Ratio (S/N Ratio): 132dB.
  • Balanced Input Noise Rejection: 60 dB.

3. Пакеттин мазмуну

Пакетти ачкандан кийин, бардык буюмдар бар экенин жана жакшы абалда экендигин текшериңиз:

  • Power Acoustik BASS-12C Digital Bass Restoration Processor unit.
  • User Manual.
  • Dash-mount remote control.
  • Wiring harness for power and remote connections.
  • Аппаратты орнотуу.

4. Коопсуздук маалыматы

ЭСКЕРТҮҮ:

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always handle with care and follow local regulations for disposal.

Ensure proper installation by a qualified professional to prevent damage to the unit or vehicle. Disconnect the vehicle's battery before installation.

5. Орнотуу жана орнотуу

Proper installation is crucial for optimal performance. Refer to the diagram below for connection points.

Power Acoustik BASS-12C Digital Bass Restoration Processor with controls and input/output ports

1-сүрөт: Алдыңкы жана арткы панелдин үстүндөview of the BASS-12C. This image displays the unit's top panel with "WIDE" and "SWEEP" controls, "POWER" and "MAX BASS CONTROL" indicators, and the "POWER ACOUSTIK" logo. The side panels show "BALANCED INPUT" (L/R RCA), "OUTPUT" (L/R RCA), "+12V", "GROUND", "REMOTE" terminals, and "DASH REMOTE" port.

5.1 Монтаждоо

Choose a secure, dry location for mounting the BASS-12C, away from direct heat or moisture. Ensure adequate ventilation around the unit. Use the provided mounting hardware to secure the processor.

5.2 Зымдарды туташтыруу

  1. Кубат туташуу (+12V): Connect the +12V terminal on the BASS-12C to a constant +12V power source from the vehicle's battery. Use appropriate gauge wire and an inline fuse (not supplied) as close to the battery as possible.
  2. Ground Connection (GROUND): Connect the GROUND terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid, low-resistance connection.
  3. Remote Turn-On (REMOTE): Connect the REMOTE terminal to the remote turn-on output of your head unit or another switched +12V source. This will turn the BASS-12C on and off with your audio system.
  4. Audio Input (BALANCED INPUT L/R): Connect the RCA outputs from your head unit or signal processor to the BALANCED INPUT L/R RCA jacks on the BASS-12C.
  5. Audio Output (OUTPUT L/R): Connect the OUTPUT L/R RCA jacks from the BASS-12C to the RCA inputs of your ampкөтөргүч (лар).
  6. Пульттун башкаруу панели: Connect the provided dash-mount remote control cable to the DASH REMOTE port on the BASS-12C. Mount the remote in an accessible location for easy adjustment.

6. Иштөө нускамалары

The BASS-12C offers several controls to fine-tune your bass response. Familiarize yourself with these controls for optimal audio customization.

6.1 Алдыңкы панелдин башкаруу элементтери

  • КЕҢИРИ КОНТРОЛДОО: This knob adjusts the width of the bass restoration effect. Turning it clockwise increases the perceived width of the bass, making it sound fuller.
  • SWEEP башкаруу: This knob allows you to select the center frequency for the bass restoration. Adjust this to target specific bass frequencies that you wish to enhance.
  • POWER көрсөткүчү: A green LED that illuminates when the unit is powered on.
  • MAX BASS CONTROL Indicators: These LEDs indicate the level of bass restoration being applied.

6.2 Dash Remote Control

The dash-mount remote control provides convenient access to key bass adjustments from your driving position.

  • Bass Level Knob: This knob controls the overall output level of the bass restoration. Turn clockwise to increase bass, counter-clockwise to decrease.
  • PFM Subsonic чыпкасын которуштуруу: This switch activates or deactivates the PFM (Programmable Frequency Match) subsonic filter, which helps protect subwoofers from damaging ultra-low frequencies.

6.3 Баштапкы орнотуу жана жөндөө

  1. Start with the WIDE and SWEEP controls at their minimum settings.
  2. Play a piece of music with strong bass content.
  3. Slowly increase the WIDE control until the bass sounds full and impactful without distortion.
  4. Adjust the SWEEP control to find the frequency range where the bass restoration is most effective and pleasing to your ears.
  5. Use the remote control's Bass Level knob to set the desired overall bass intensity.
  6. Experiment with the PFM Subsonic Filter to determine if it improves bass clarity and protects your subwoofers in your specific setup.

7. Техникалык тейлөө

The Power Acoustik BASS-12C requires minimal maintenance. Keep the unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive cleaners. Ensure all connections remain secure over time.

8. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Кубат жок / Бирдик күйбөйт.
  • No +12V power.
  • Жерге байланышы начар.
  • No remote turn-on signal.
  • Күйгүзүүчү.
  • Check +12V power wire and fuse.
  • Verify ground connection is secure.
  • Ensure remote wire is connected and receiving +12V when head unit is on.
  • Replace fuse if blown (ensure correct ampөчүрүү).
No bass restoration effect.
  • Туура эмес киргизүү/чыгарма байланыштары.
  • WIDE or SWEEP controls set too low.
  • Remote bass level set too low.
  • RCA киргизүү жана чыгаруу туташууларын текшериңиз.
  • Adjust WIDE and SWEEP controls.
  • Increase bass level using the dash remote.
Distorted bass.
  • Киргизүү сигналы өтө жогору.
  • Чыгуу деңгээли өтө жогору.
  • Ampкөтөргүч пайда өтө жогору коюлган.
  • Reduce head unit volume or input sensitivity.
  • Lower the bass level on the dash remote.
  • Тууралоо ampкөтөрүүчү пайда орнотуулары.
Noise or hum in audio.
  • Негизги цикл.
  • Poor quality RCA cables.
  • Power wires too close to RCA cables.
  • Ensure all components are grounded to a common point.
  • Жогорку сапаттагы коргоочу RCA кабелдерин колдонуңуз.
  • Route power and audio cables separately.

9. Техникалык шарттар

Продукциянын өлчөмдөрү10.5 x 8.5 x 2.5 дюйм
Элемент Салмагы2.08 унция
Модель номериBASS-12C
Чыгуу деңгээли13.5 вольт
Frequency Response10Гц - 100КГц
THD0.002%
S/N катышы132дБ
Balanced Input Noise четке кагуу60 дБ
ТүсChrome
МатериалМеталл
ӨндүрүүчүPower Acoustik

10. Кепилдик жана колдоо

Power Acoustik products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Power Acoustik webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For technical support or service inquiries, please contact Power Acoustik customer service through their official channels. Do not attempt to repair the unit yourself, as this may void the warranty.

Тектеш документтер - BASS-12C

Preview Power Acoustik CPAA-70M RDS Firmware жаңыртуу колдонмосу
Power Acoustik CPAA-70M RDS кабылдагычындагы микропрограмманы жаңыртуу боюнча кадам-кадам нускамалар. Жүктөп алууну, USB дискти даярдоону жана жаңыртууну кантип жасоону үйрөнүңүз.
Preview Power Acoustik SA-26 Спектр анализаторун орнотуу жана иштетүү боюнча колдонмо
Бул колдонмо Power Acoustik SA-26 Спектр анализаторун орнотуу жана кубаттандыруу боюнча нускамаларды камтыйт, эки тараптуу клей же бурчтуу кронштейн аркылуу монтаждоо жолдорун жана USB же түз зымдар аркылуу электр туташууларын камтыйт.
Preview Power Acoustik CP-71W AV борборунун ээсинин колдонмосу
Power Acoustik CP-71W AV борбору үчүн комплекстүү ээсинин колдонмосу, зымсыз Apple CarPlay менен 1-DIN унаа стерео. Орнотуу, иштетүү, функциялар жана көйгөйлөрдү чечүү кирет.
Preview Power Acoustik CPAA-70M AV борбору 2-Din башкы блок Колдонуучунун колдонмосу
Бул колдонмо Power Acoustik CPAA-70M AV борбору, MP3/MP4/USB/SD/AUX, орнотулган AM/FM, Bluetooth, Apple CarPlay жана Android Auto колдоосу менен 2-Din Башкы блок үчүн комплекстүү нускамаларды камтыйт. Бул орнотууну, зымдарды, панелдин функцияларын, алыстан башкарууну, ар кандай тиркемелерди, көйгөйлөрдү аныктоону жана спецификацияларды камтыйт.
Preview Power Acoustik CPAA-70D10M 2-DIN башкы блок Колдонуучунун колдонмосу
Бул колдонмо Power Acoustik CPAA-70D10M 2-DIN Башкы блогу үчүн анын өзгөчөлүктөрүн, орнотууларын, иштешин жана спецификацияларын камтыган комплекстүү нускамаларды камтыйт. Apple CarPlay, Android Auto, Bluetooth, USB, SD, Радио жана AV IN функцияларын кантип колдонууну үйрөнүңүз.
Preview Power Acoustik RZR1-2500D RAZOR 1-канал санарип сабвуфер Amplifier Колдонмо
Бул колдонмо өзгөчөлүктөр, спецификациялар, кубат туташуулары, киргизүү туташуулары, чыгуу зымдарынын конфигурациялары, алдын алаamp Power Acoustik RZR1-2500D RAZOR 1-канал санарип сабвуфер үчүн өзгөчөлүктөр, монтаждоо нускамалары, пайда орнотуулары, бассты жогорулатууну көзөмөлдөө, көйгөйлөрдү чечүү жана кепилдик Ampөмүрлүү.