Forney 58402 Electrical Receptacle Instruction Manual

1. Продукт бүтүп калдыview

The Forney 58402 is a heavy-duty Bakelite pin-type wall electrical receptacle designed for surface mounting. It features a 2-pole/3-wire grounding configuration, suitable for high-power applications. This receptacle is rated for 50 Amps at 125/250 Volts and conforms to NEMA 6-50 standards.

Негизги өзгөчөлүктөрү:

• Heavy duty Bakelite pin-type design for durability.
• Wall electrical receptacle for surface mounting.
• 2-pole/3-wire grounding for enhanced safety.
• 50 Amp with 125/250-Volt capacity.
• NEMA 6-50 electrical configuration.

Сүрөт 1: Алдыңкы view of the Forney 58402 Electrical Receptacle, showing the pin configuration and voltage/ampрейтингдерди өчүрүү.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Electrical work can be hazardous. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this receptacle. Failure to do so may result in serious injury or death. If you are unsure about any part of these instructions, consult a qualified electrician.

• Бардык жергиликтүү жана улуттук электр коддору сакталганын текшериңиз.
• Изоляцияланган кол каптар жана коргоочу көз айнек сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) колдонуңуз.
• Томду ырастаңызtagд жана amperage of your circuit match the receptacle's ratings (50A, 125/250V).
• Do not use this receptacle if it appears damaged.
• Балдарды электр орнотмолорунан алыс кармаңыз.

3. Орнотуу жана орнотуу

This section provides general guidelines for installing the Forney 58402 wall receptacle. Specific wiring configurations may vary based on local codes and existing electrical systems.

Керектүү шаймандар жана материалдар:

• Бурагычтар (Phillips жана Flathead)
• Зымдарды сыйрып алуучулар
• Тtage сыноочу
• Mounting screws (appropriate for surface)
• Electrical box (if not already present)

Орнотуу кадамдары:

1. Кубатты өчүрүү: Locate the circuit breaker or fuse controlling the circuit where the receptacle will be installed and turn it OFF. Verify power is off using a voltage сыноочу.
2. Монтаждоо бетин даярдоо: Ensure the surface is clean, dry, and structurally sound. The receptacle is designed for surface mounting.
3. Mount the Receptacle Base: Position the receptacle base on the desired surface. Use appropriate mounting screws to secure it firmly. The back of the receptacle features pre-drilled holes for this purpose.


2-сүрөт: Артка view of the Forney 58402 Receptacle, showing the metal mounting plate and screw holes for surface installation.

4. Зым байланыштары: This receptacle is a 2-pole/3-wire grounding type (NEMA 6-50). It typically requires two hot wires (L1, L2) and one ground wire.
• Strip approximately 1/2 inch of insulation from each wire.
• Connect the L1 (Hot) wire to one of the brass-colored terminals.
• Connect the L2 (Hot) wire to the other brass-colored terminal.
• Connect the Ground wire (typically green or bare copper) to the green hexagonal grounding screw.


3-сүрөт: Төмөнкү view of the Forney 58402 Receptacle, illustrating the internal wiring access points and terminals.

5. Коопсуз зымдар: Ensure all wire connections are tight and secure. No bare wire should be exposed outside the terminals.
6. Кайра чогултуу: Carefully place the cover over the wired base and secure it with the provided screws.
7. Күчтү калыбына келтирүү: Once installation is complete and verified, turn the power back ON at the circuit breaker or fuse box.

4. Иштөө нускамалары

The Forney 58402 Electrical Receptacle is designed for straightforward operation.

1. Шайкештикти текшерүү: Ensure the plug of your electrical device is compatible with the NEMA 6-50 configuration of this receptacle.


Сүрөт 4: Жакын пландан view of the Forney 58402 Receptacle's pin configuration, showing the 50A 250V markings.

2. Plug: Align the pins of your device's plug with the slots on the receptacle and firmly insert the plug.
3. Plug алып салуу: To disconnect, grasp the plug firmly and pull it straight out from the receptacle. Do not pull by the cord.

5. Техникалык тейлөө

Regular inspection and basic maintenance will help ensure the longevity and safe operation of your Forney 58402 receptacle.

• Мезгилдүү текшерүү: Annually inspect the receptacle for any signs of damage, cracks, discoloration, or loose connections.
• Тазалоо: With power disconnected, gently wipe the exterior of the receptacle with a dry, clean cloth to remove dust or debris. Do not use liquid cleaners.
• Байланыштарды бекемдөө: If comfortable and with power disconnected, periodically check and tighten the terminal screws to ensure secure wire connections.
• Курчап турган чөйрөнү коргоо: Жарнамада орнотулган болсоamp or dusty environment, ensure the receptacle is adequately protected from moisture and excessive dust accumulation.

6. Кыйынчылыктарды

If you experience issues with your Forney 58402 receptacle, consider the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, or if you are unsure, contact a qualified electrician.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Specific warranty details for the Forney 58402 Electrical Receptacle are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact Forney customer service directly.

You may visit the official Forney webбайланыш маалыматы жана кошумча ресурстар үчүн сайт: www.forneyind.com