Zipper RPE60 бензин плитасынын тыгыздагычы колдонуучунун колдонмосу

1. Киришүү

This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Zipper RPE60 Petrol Plate Compactor. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Zipper RPE60 is a robust petrol-powered vibrating plate designed for compacting various granular materials such as sand, gravel, and asphalt. Its compact design and powerful engine make it suitable for a range of construction and landscaping tasks.

2. Коопсуздук нускамалары

Always prioritize safety when operating the plate compactor. Failure to follow these instructions can result in serious injury or death.

2.1 Жалпы коопсуздук

• Иштөөдөн мурун толук нускаманы окуп, түшүнүңүз.
• Wear appropriate Personal Protective Equipment (PPE), including safety glasses, hearing protection, sturdy footwear, and gloves.
• Do not operate the machine under the influence of alcohol, drugs, or medication that may impair judgment.
• Балдарды жана жанындагы адамдарды операция аймагынан алыс кармаңыз.
• Ensure the work area is well-lit and free of obstacles.

2.2 Күйүүчү майдын коопсуздугу

• Кыймылдаткычты өчүрүп, муздатуу менен жакшы желдетилген жерде май куюңуз.
• Do not smoke or allow open flames near the fuel tank.
• Төгүлгөн күйүүчү майдын баарын дароо сүртүңүз.
• Store fuel in approved containers away from heat sources.

2.3 Иштөө коопсуздугу

• Operate the compactor on stable ground.
• Be aware of exhaust fumes; operate only in well-ventilated areas.
• Do not operate on slopes that are too steep, as the machine may tip.
• Иштеп жатканда машинаны эч качан кароосуз калтырбаңыз.

3. Компоненттер жана башкаруу элементтери

Familiarize yourself with the key components of the Zipper RPE60 Plate Compactor.

3.1-сүрөт: Фронт view of the Zipper RPE60 Petrol Plate Compactor, showing the engine, fuel tank, and compaction plate.

3.2-сүрөт: Side view of the Zipper RPE60, highlighting the handle assembly and transport wheels.

3.3-сүрөт: Жакын план view of the engine on the Zipper RPE60, showing the air filter and recoil starter.

Негизги компоненттер:

• Мотор: Petrol-powered engine providing the necessary power for compaction.
• Күйүүчү май багы: Located on top of the engine, for petrol storage. Capacity: 3.6 litres.
• Compaction Plate: The heavy base plate that vibrates to compact the material. Dimensions: 35 cm (width) x 51 cm (depth).
• Туткасы Ассамблеясы: For guiding and controlling the compactor.
• дроссель башкаруу: Adjusts engine speed and vibration intensity.
• Стартер: For manually starting the engine.
• Транспорт дөңгөлөктөрү: For easier movement of the machine when not in operation.

4. Setup and Pre-Operation Checks

Before starting the compactor, perform the following checks to ensure safe and efficient operation.

4.1 Чогултуу (зарыл болсо)

The Zipper RPE60 typically comes partially assembled. Attach the handle assembly securely using the provided hardware. Ensure all bolts are tightened to the manufacturer's specifications.

4.2 Күйүүчү май

1. Мотор өчүрүлгөн жана муздатылганын текшериңиз.
2. Күйүүчү май багынын капкагын ачыңыз.
3. Fill the tank with fresh, unleaded petrol (minimum 95 RON). Do not overfill.
4. Күйүүчү май багынын капкагын бекем жабыңыз.

4.3 Engine Oil Check

1. Place the compactor on a level surface.
2. Locate the oil dipstick/fill cap.
3. Remove, wipe clean, reinsert (without screwing in), and remove again to check the oil level.
4. Add recommended engine oil (e.g., SAE 10W-30) if the level is low, ensuring it reaches the full mark.
5. Securely replace the dipstick/fill cap.

4.4 Жалпы текшерүүлөр

• Inspect the air filter for cleanliness. Clean or replace if necessary.
• Check all nuts, bolts, and fasteners for tightness.
• Ensure the compaction plate is clean and free of debris.
• Verify that the throttle control operates smoothly.

5. Иштөө нускамалары

Follow these steps for safe and effective operation of your plate compactor.

5.1 Моторду ишке киргизүү

1. Ensure the fuel valve is open (ON position).
2. Дроссель рычагын "CHOKE" абалына жылдырыңыз (муздак от алдыруу үчүн).
3. Move the throttle lever slightly to the "FAST" position.
4. Pull the recoil starter handle firmly and smoothly until the engine starts. Do not let the rope snap back.
5. Мотор ишке киргенден кийин, .Муунткучтун рычагын акырындык менен "RUN" абалына жылдырыңыз.
6. Allow the engine to warm up for a few minutes before engaging compaction.

5.2 Compaction Procedure

5.1-сүрөт: An operator guiding the Zipper RPE60 Plate Compactor over a gravel surface, demonstrating typical use.

5.2-сүрөт: Башка view of the Zipper RPE60 in operation, showing the operator's stance and control of the handle.

• Set the engine speed to the desired level using the throttle. Higher speeds generally result in greater compaction force.
• Guide the compactor slowly and steadily over the material to be compacted.
• Overlap each pass by approximately one-third of the plate width to ensure uniform compaction.
• For optimal compaction, make multiple passes over the same area, gradually increasing the number of passes until the desired density is achieved.
• The recommended compaction depth is up to 150 cm, with a movement speed of 13.8 meters per minute.
• For cohesive soils, it may be beneficial to lightly moisten the surface before compaction.

5.3 Моторду токтотуу

1. Reduce the engine speed to idle.
2. Кыймылдаткычтын которгучун "OFF" абалына жылдырыңыз.
3. Close the fuel valve (OFF position) to prevent fuel leakage.

6. Техникалык тейлөө

Regular maintenance is crucial for the longevity and optimal performance of your Zipper RPE60.

6.1 Күнүмдүк тейлөө

• Clean the compactor thoroughly after each use, removing dirt and debris from the plate and engine area.
• Мотор майынын деңгээлин текшериңиз.
• Inspect air filter for excessive dirt.
• Check for loose fasteners and tighten as needed.
• Inspect the V-belt for wear or damage.

6.2 Мезгил-мезгили менен тейлөө

• Every 25 hours or monthly: Clean/replace air filter. Check spark plug; clean or replace if fouled.
• Every 50 hours or 3 months: Change engine oil. Inspect fuel filter.
• Every 100 hours or 6 months: Inspect valve clearance (professional service recommended). Clean fuel tank.
• Жыл сайын: Full service by a qualified technician.

6.3 Сактоо

For long-term storage, drain the fuel tank and carburetor. Remove the spark plug and add a small amount of engine oil into the cylinder, then pull the recoil starter a few times to distribute the oil. Store the compactor in a clean, dry place.

7. Кыйынчылыктарды

Бул бөлүмдө кеңири таралган операциялык көйгөйлөрдүн чечимдери берилген. Бул жерде көрсөтүлбөгөн көйгөйлөр боюнча квалификациялуу тейлөө кызматкерлерине кайрылыңыз.

8. Техникалык шарттар

9. Кепилдик маалыматы

Zipper products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Zipper webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

10. Кардарларды колдоо кызматы

If you require technical assistance, spare parts, or have questions regarding your Zipper RPE60 Plate Compactor, please contact your authorized Zipper dealer or the customer service department. Refer to the contact information provided with your purchase documentation or on the official Zipper webсайт.

For general inquiries, you may also refer to the seller "Scheppach Direct UK" if purchased via Amazon, as indicated in the product listing.