Audiovox 5BCR10P Two-way Replacement Transmitter User Manual

1. Introduction and Overview

This manual provides comprehensive instructions for the Audiovox 5BCR10P two-way replacement transmitter. This transmitter is designed to work seamlessly with Audiovox APS596C and APS997C vehicle security and remote start systems, offering enhanced control and feedback. The system features a deluxe 2-way LCD display for command confirmation, various start modes, and security alerts.

Image: The Audiovox 5BCR10P two-way replacement transmitter, showcasing its five-button layout and LCD screen for command confirmation.

2. Продукциянын өзгөчөлүктөрү

• Two-way LCD Command Confirming Transmitter: Provides visual and audible feedback on system status.
• Five-Button Design: Ар кандай функциялар үчүн интуитивдик башкаруу.
• One Five-Button Metal 1-Way Remote Control: Included for basic operations.
• Программаланган жөнөтүүчүнүн билдирүүсү: Alerts when a transmitter is successfully programmed.
• Glass Mount Antenna with Built-in LED Light and Valet Switch: Integrated components for system status and control.
• Single or Two User Programmable: Allows customization for individual or multiple users.
• Separate Control Outputs: Enables distinct control over different vehicle functions.
• 24-Hour Start Mode: Allows for scheduled remote starts.
• Cold Temperature Start Mode: Automatically starts the vehicle in cold conditions.
• Illuminated Entry Mode: Activates vehicle lights upon disarming.
• Алыстан дүрбөлөң: Activates the alarm for emergency situations.
• Protected Valet Mode: Temporarily disables security features for service.
• Intrusion Alert with Memory: Notifies of past security breaches.

3. Орнотуу жана программалоо

3.1. Батареяны орнотуу

The 5BCR10P transmitter requires one AAA battery for operation. To install or replace the battery:

1. Өткөргүчтүн арткы бетиндеги батарея бөлүмүнүн капкагын табыңыз.
2. Carefully open the compartment using a small coin or screwdriver if necessary.
3. Туура полярдуулукту (+/-) текшерип, бир AAA батарейкасын салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

3.2. Transmitter Programming (Pairing)

To ensure the replacement transmitter communicates with your vehicle's security system (APS596C or APS997C), it must be programmed. The exact programming steps may vary slightly depending on your specific system installation. It is highly recommended to consult the original installation manual for your APS596C or APS997C system or contact a professional installer for assistance. General steps often involve:

1. Унаага кирип, бардык эшиктерди жабыңыз.
2. От алдыргычтын ачкычын "ON" абалына буруңуз.
3. Locate the system's valet switch (often integrated into the glass mount antenna).
4. Press and release the valet switch a specific number of times (e.g., 5 times) within a set timeframe (e.g., 10 seconds). The system will usually respond with a chirp or light flash.
5. Press and hold the LOCK button on the new transmitter until the system responds with a chirp or light flash, indicating successful programming.
6. Repeat for any additional transmitters.
7. Turn the ignition key to the "OFF" position to exit programming mode.

Эскертүү: Incorrect programming can lead to system malfunction. If unsure, seek professional installation or programming services.

4. Иштөө нускамалары

The 5BCR10P transmitter provides control over various functions of your Audiovox APS596C or APS997C system. The LCD screen provides visual confirmation of commands and system status.

4.1. Негизги функциялар

• Arming the System (Lock): басыңыз БУЛПОО button once. The vehicle will lock, and the system will arm. The LCD will display an armed icon.
• Disarming the System (Unlock): басыңыз БҮЛПӨНҮ АЧУУ button once. The vehicle will unlock, and the system will disarm. The LCD will display an unlocked icon.
• Алыстан баштоо: басып, кармап туруңуз START button (often indicated by a key or engine icon) for approximately 3 seconds. The vehicle will attempt to start. The LCD will confirm the start status.
• Магистралдык релиз: басып, кармап туруңуз ТРАНК button (often indicated by a trunk icon) for approximately 3 seconds. The trunk will release.
• Паника режими: басып, кармап туруңуз ДҮРБӨЛӨҢ button (often indicated by a horn or siren icon) for approximately 3 seconds to activate the alarm. Press any button to deactivate.

4.2. Advanced Functions and Feedback

• 2-Way Feedback: The LCD screen will display icons and text to confirm commands (e.g., "Locked," "Unlocked," "Started") and alert you to system status (e.g., "Door Open," "Alarm Triggered").
• Checking Vehicle Status: басыңыз ФУНКЦИЯ button (often labeled "F" or "Option") followed by a specific button to query vehicle status (e.g., door lock status, temperature). Refer to your main system manual for specific button combinations.
• Valet режими: Use the valet switch or a specific transmitter sequence to enter/exit valet mode. In valet mode, the security features are temporarily bypassed, but remote start and keyless entry typically remain active.
• Cold Temperature Start Mode: This feature, if enabled in your system, will automatically start the vehicle when the interior temperature drops below a preset level.
• 24-Hour Start Mode: Allows you to program the system to automatically start the vehicle at a specific time every 24 hours.

Маанилүү: For detailed instructions on all advanced features and programmable options, refer to the complete user manual for your Audiovox APS596C or APS997C system.

5. Техникалык тейлөө

5.1. Батареяны алмаштыруу

When the transmitter's LCD display dims or its range decreases, it's time to replace the AAA battery. Follow the steps outlined in Section 3.1. Always use a fresh, high-quality AAA battery.

5.2. Жалпы кам көрүү

• Keep the transmitter dry. Exposure to moisture can damage internal components.
• Ашыкча температурадан сактаныңыз.
• Do not drop or subject the transmitter to severe impacts.
• Clean the transmitter with a soft, dry cloth. Do not use harsh chemicals or solvents.

6. Кыйынчылыктарды

If problems persist after attempting these solutions, contact a qualified Audiovox service technician.

7. Техникалык шарттар

8. Кепилдик маалыматы

Audiovox products are typically covered by a limited warranty. The specific terms and duration of the warranty for your 5BCR10P replacement transmitter will depend on the date and place of purchase. Please retain your proof of purchase.

For detailed warranty information, including coverage, limitations, and how to make a claim, please refer to the warranty card included with your original product packaging or visit the official Audiovox webсайт.

9. Колдоо жана байланыш

If you require further assistance with your Audiovox 5BCR10P transmitter or your APS596C/APS997C system, please utilize the following resources:

• Официалдуу Webсайт: Visit the Audiovox support section on their official website for FAQs, product documentation, and contact information. A potential resource is www.aps-trans.com.
• Кардарларды тейлөө: Contact Audiovox customer support directly for technical assistance or service inquiries.
• Authorized Dealer/Installer: For installation-related questions or complex troubleshooting, consult the authorized dealer or professional installer who installed your system.