VANGUARD 1254SL Stereo Microscope Колдонуучунун колдонмосу

1. Киришүү

Thank you for choosing the Vanguard 1254SL Stereo Microscope. This instrument is designed to provide high-quality, three-dimensional images for a wide range of applications, including biological dissection, industrial inspection, and educational purposes. Its robust construction and advanced optical system ensure reliable performance and clear observations. Please read this manual thoroughly before operating the microscope to ensure proper use, optimal performance, and longevity of the instrument.

2. Коопсуздук чаралары

To ensure safe operation and prevent damage to the microscope or injury to the user, please observe the following precautions:

• Микроскопту ар дайым этияттык менен кармаңыз. Капыстан тийүүдөн же титирөөдөн алыс болуңуз.
• Do not expose the microscope to direct sunlight, high temperatures, or high humidity.
• электр менен жабдууну камсыз кылуу voltage matches the microscope's requirements (110V).
• Тазалоодон же оңдоодон мурун электр шнурын сууруп алыңыз.
• Do not disassemble the microscope. Refer servicing to qualified personnel.
• Keep the optical components clean. Use only specialized lens cleaning materials.
• Avoid touching the lens surfaces with bare hands.

3. Пакеттин мазмуну

Carefully unpack the microscope and check that all components are present and undamaged.

• Vanguard 1254SL Stereo Microscope Body
• Бинокулярдык баш
• 10X Wide-Field Eyepieces (2 pieces)
• Reversible Black/White Stage Plate
• Дат баспас болот Сtage Clips (2 pieces)
• Электр шнур (110V)
• Чаң капкагы
• User Manual

4. Компонентти идентификациялоо

4.1-сүрөт: Бүттүview of the Vanguard 1254SL Stereo Microscope. This image shows the complete microscope unit, highlighting its binocular head, objective housing, stage with LED illumination, and control knobs for power and focus.

Микроскоптун негизги компоненттери менен таанышыңыз:

• Окулярлар: The two tubes at the top where you look through. These are 10X wide-field eyepieces.
• Binocular Head: The assembly holding the eyepieces, rotatable 360 degrees.
• Objective Housing: Contains the 2X and 4X objectives, providing dual magnification.
• Фокустоо баскычтары: Large knobs on the side for adjusting the focus of the image.
• Stage: The flat platform where samples are placed. It includes a reversible black/white stage табак.
• Stage Клиптер: Stainless steel clips to hold samples in place on the stage.
• Illumination Controls: Knobs and switches on the base for controlling the top (incident) and bottom (transmitted) LED lights.
• Негизги: The stable foundation of the microscope, housing the illumination system and electronics.

5. Орнотуу

1. Пакеттен чыгаруу: Carefully remove all components from the packaging. Retain the original packaging for future transport or storage.
2. Жайгашкан жери: Place the microscope on a stable, level surface, away from direct sunlight, heat sources, and areas with excessive dust or vibration.
3. Окулярды орнотуу: Insert the two 10X wide-field eyepieces into the eyepiece tubes on the binocular head. Gently push them down until they are seated firmly.
4. Stage Plate: Place the reversible black/white stage plate onto the stage. Choose the black side for light-colored samples and the white side for dark-colored samples to enhance contrast. Secure it with the stage clips if desired.
5. Кубат туташуу: Connect the power cord to the microscope's power input jack, typically located at the rear or side of the base. Plug the other end into a standard 110V AC power outlet.

6. Иштөө нускамалары

6.1 Күйгүзүү/өчүрүү

• Locate the ON/OFF switch on the base of the microscope.
• Flip the switch to the "ON" position to power on the microscope and its illumination system.
• Flip the switch to the "OFF" position when finished using the microscope.

6.2 Жарыкты жөндөө

The 1254SL features both top (incident) and bottom (transmitted) LED illumination.

• Top Illumination: Used for opaque samples that light cannot pass through. Control knob adjusts intensity.
• Bottom Illumination: Used for transparent or translucent samples. Control knob adjusts intensity.
• Adjust the intensity of each light source using the respective dimmer knobs on the base until the desired brightness and contrast are achieved.

6.3 Placing and Focusing a Sample

1. Силерди койгулаample on the center of the stage plate. Use the stage clips to secure it if necessary.
2. Rotate the objective housing to select the desired magnification (2X or 4X). The microscope provides 20X or 40X total magnification with the 10X eyepieces.
3. Look through the eyepieces.
4. тууралаңыз Фокус баскычтары (coarse and fine) on the side of the microscope to bring the sample into sharp focus. The dual focus knobs allow for precise control.

6.4 Adjusting Eyepieces for Comfortable Viewing

• Окуучулар аралык аралык: While looking through the eyepieces, adjust the distance between them by gently pushing or pulling the eyepiece tubes until you see a single, circular field of view. This adjusts for your individual eye spacing (51 to 77 mm).
• Диоптрияны тууралоо: The right eyepiece typically has a diopter adjustment ring.
  1. Close your right eye and focus the image using only your left eye by turning the main focus knobs.
  2. Close your left eye and, without touching the main focus knobs, rotate the diopter adjustment ring on the right eyepiece until the image is sharp for your right eye.
  This compensates for differences in vision between your two eyes.

7. Техникалык тейлөө

Proper maintenance will ensure the longevity and optimal performance of your microscope.

• Оптиканы тазалоо: Use a soft brush or compressed air to remove dust from lens surfaces. For smudges or fingerprints, use a lens cleaning solution and lens tissue. Apply a small amount of solution to the tissue, not directly to the lens.
• Тазалоочу орган: Микроскоптун корпусун жумшак, d менен сүртүңүзamp кездеме. Катуу химиялык заттарды же эриткичтерди колдонуудан алыс болуңуз.
• Сактагыч: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris. Store it in a cool, dry place.
• LED жарыктары: The LED illumination system is designed for long life and typically does not require replacement.

8. Кыйынчылыктарды

If you encounter issues with your microscope, refer to the following table for common problems and solutions.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please contact Vanguard customer service. Keep your purchase receipt as proof of purchase.

Байланыш маалыматы: Please refer to the contact details provided with your product packaging or visit the official Vanguard webакыркы колдоо маалымат үчүн сайт.