Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Derale 15708 Remote Filter Mount Kit. This kit is designed to relocate your engine's oil filter to a more accessible location, which can be beneficial for various applications, including those requiring custom engine configurations or easier maintenance access.
Коопсуздук маалыматы
Always prioritize safety when working on your vehicle. Ensure the engine is cool before beginning any work. Wear appropriate personal protective equipment, including gloves and eye protection. Disconnect the vehicle's battery before installation. Consult a professional mechanic if you are unsure about any steps. Oil can be hot and cause burns. Use proper tools and techniques to avoid injury or damage to components.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Remote Filter Mount Unit
- Монтаждоочу жабдыктар (бурамалар)
- Hose Barbs (brass fittings)
- Жиптүү Ниппель
- (Hoses and clamps are typically sold separately or may be included in specific kits. Refer to your packaging.)
1-сүрөт: Бүттүview of the Derale 15708 Remote Filter Mount Kit components, including the main mount, brass hose barbs, and mounting screws.
Орнотуу
- Даярдоо: Ensure the engine is off and cool. Drain the engine oil and remove the existing oil filter.
- Адаптерди орнотуу: Install the provided threaded nipple onto the engine block where the original oil filter was located. Then, attach the remote filter adapter to this nipple. Ensure a tight, leak-free seal.
- Монтаждоо ордун тандоо: Choose a suitable location for the remote filter mount. The location should be easily accessible for future oil filter changes, away from moving parts, and protected from road debris. Consider the length of the oil lines required.
- Mounting the Remote Unit: Secure the remote filter mount unit to the chosen location using the provided mounting hardware. The unit features a 3-bolt heavy-duty mounting plate.
- Connecting Oil Lines: Attach appropriate oil-resistant hoses (not included) to the hose barbs on the remote filter mount and the adapter on the engine block. Ensure the "IN" and "OUT" ports are correctly connected according to your engine's oil flow direction. Secure all hose connections with high-quality hose clampагып кетпеши үчүн.
- Installing Oil Filter: Thread a new oil filter onto the remote filter mount. Ensure the filter is compatible with the 3/4-16 inch center thread.
- Refilling Oil: Refill the engine with the manufacturer-recommended amount and type of engine oil.
- Агып кетүүнү текшерүү: Start the engine and immediately check for any oil leaks around the adapter, hoses, and remote filter mount. If leaks are detected, shut off the engine, allow it to cool, and re-tighten connections or replace faulty components.
2-сүрөт: Арткы view of the remote filter mount, highlighting the three mounting points for secure installation.
3-сүрөт: Side profile of the remote filter mount, illustrating its compact design and key dimensions for installation planning.
4-сүрөт: Illustrative diagram showing how an oil filter attaches to the remote filter mount. Note: Actual part may differ slightly.
Note: The provided video is an independent review and installation example by an influencer, not an official installation guide from Derale. While it demonstrates a real-world application, always refer to this manual and professional advice for official installation procedures.
Иштөө нускамалары
Once installed, the remote filter mount operates as an integral part of your engine's oil lubrication system. No special operating procedures are required beyond standard engine operation. Always ensure the oil filter is securely tightened and there are no leaks before driving.
Техникалык тейлөө
- Май чыпкасын алмаштыруу: Replace the oil filter according to your vehicle manufacturer's recommendations or more frequently under severe operating conditions. Ensure to use a compatible oil filter with a 3/4-16 inch center thread.
- агып текшерүү: Periodically inspect all connections (adapter, hoses, remote mount) for any signs of oil leaks, especially after extreme driving conditions or temperature changes.
- Шлангынын абалы: Check the oil hoses for cracks, chafing, or deterioration. Replace hoses immediately if any damage is observed.
- Монтаждоо коопсуздугу: Verify that the remote filter mount remains securely fastened to its mounting surface.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мунайдын агуусу | Loose connections, damaged hoses, improper filter installation, faulty O-rings/gaskets. | Tighten all fittings and clamps. Inspect hoses for damage and replace if necessary. Ensure oil filter is correctly threaded and tightened. Check and replace O-rings/gaskets if worn. |
| Төмөн май басымы | Severe oil leak, incorrect oil level, clogged filter, internal engine issue. | Check for and rectify any oil leaks. Verify oil level and add if low. Replace oil filter. If problem persists, consult a mechanic. |
| Вибрация/Ызы-чуу | Loose mounting, hoses rubbing against other components. | Ensure the remote mount is securely fastened. Reroute hoses to prevent contact with other parts, or use protective sleeving. |
Техникалык шарттар
- Модел: 15708
- Материал: Алюминий куюлган
- Бүтүрүү: Жылмаланган
- Порттор: 1/2 inch NPT Female Ports
- Center Thread: 3/4-16 дюйм
- Монтаждоо: 3-bolt heavy duty mounting plate
- Fit түрү: Universal Fit
- Элемент Салмагы: 372 г
- Келип чыккан өлкө: Кытай
Кепилдик жана колдоо
For warranty information and technical support, please refer to the official Derale webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
