Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of the Velleman MK179 Proximity Card Reader Kit. The MK179 is designed for various access control and security applications, including opening doors, managing security systems, and authorizing equipment use. Please read these instructions carefully before beginning assembly or operation.
Негизги өзгөчөлүктөрү
- Easy Addition and Removal of Tags
- Coil Can Be Mounted Away From the Board
- Extremely Secure and Practically Safe Operation
Орнотуу жана чогултуу
The Velleman MK179 is supplied as a kit and requires assembly. Careful soldering and component placement are essential for proper functionality.
Компоненттин идентификациясы
Before starting, identify all components against the provided parts list (not included in this manual, refer to kit packaging). The main circuit board and the proximity cards are key elements.
Сүрөт 1: The Velleman MK179 circuit board, showing various electronic components such as resistors, capacitors, integrated circuits, and a relay. This board forms the core of the proximity card reader.
Чогултуу кадамдары
- Жумуш мейкиндигин даярдоо: Ensure a clean, well-lit workspace with appropriate soldering tools.
- Solder Components: Carefully solder all components onto the printed circuit board according to the silk screen markings and the kit's detailed instructions. Pay close attention to component orientation (e.g., diodes, ICs, electrolytic capacitors). Абайлаңыз: Incorrect soldering can prevent the device from functioning. Double-check all solder joints for bridges or cold joints.
- Катушканы туташтыруу: The proximity coil can be mounted directly on the board or remotely, allowing for flexible installation options. Ensure a secure connection to the designated terminals.
- Электр камсыздоо: Connect a stable 12V DC power supply to the designated input terminals. Observe correct polarity.
Сүрөт 2: An assembled Velleman MK179 Proximity Card Reader Kit, showcasing the compact design of the circuit board with its components and the integrated relay.
Иштөө нускамалары
The MK179 operates by reading unique identification codes from proximity cards (tags).
Сүрөт 3: Two white proximity cards, included with the Velleman MK179 kit, used for activating the reader.
Adding and Removing Tags
The MK179 features an easy method for programming and de-programming proximity tags. Refer to the detailed instructions provided with your kit for the specific button presses and LED indicators for adding or removing tags. Generally, this involves:
- Кошуу үчүн Tag: Activate the programming mode (e.g., by pressing a button for a specific duration), then present the new tag to the reader coil. The device will confirm successful addition (e.g., via an LED flash).
- To Remove a Tag: Activate the removal mode, then present the tag to be removed. The device will confirm removal.
Кадимки операция
Бир жолу tags are programmed, simply present a valid tag to the reader coil. The device will recognize the tag and activate its output (e.g., a relay closure) for a pre-set duration, allowing it to control connected devices like door locks or alarms.
Техникалык тейлөө
The Velleman MK179 Proximity Card Reader Kit is designed for reliable operation with minimal maintenance.
- Тазалоо: Keep the circuit board and reader coil free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Экологиялык шарттар: Ensure the device is operated within its specified environmental conditions (temperature, humidity) to prevent damage.
- Электр камсыздоо: Use only a stable and correctly rated 12V DC power supply. Fluctuations or incorrect voltagал түзмөккө зыян келтириши мүмкүн.
Проблемаларды чечүү
If you encounter issues with your Velleman MK179, consider the following troubleshooting steps:
- Түзмөк күйбөй жатат:
- Электр менен камсыздоонун туташууларын текшериңиз жана үнүн туура чыгарыңызtage (12V DC) and polarity.
- Inspect for any short circuits or incorrect component placement on the assembled board.
- Tags Not Being Read:
- камсыз кылуу tag is presented within the effective reading range of the coil.
- экендигин текшериңиз tags have been correctly programmed into the device.
- Check the coil connection to the main board.
- Туура эмес чыгаруу жүрүм-туруму:
- Confirm the relay connections to the external device are correct.
- Review the programming steps for adding/removing tags to ensure no errors occurred.
- Ассамблея маселелери:
- If the device does not function after assembly, carefully inspect all solder joints for quality. A common issue is a solder bridge between traces or a "cold" solder joint that doesn't make proper electrical contact.
- Verify that all components are in their correct positions and orientations.
Техникалык шарттар
| Элемент моделинин номери | MK179 |
| Продукциянын өлчөмдөрү | 0.98 x 4.76 x 7.87 дюйм |
| Элемент Салмагы | 2.56 унция |
| Бренд | Velleman |
| Өндүрүүчү | Velleman |
| ASIN | B004XZPW0G |
| UPC | 836479009196 |
| Келип чыккан өлкө | Польша |
Колдоо жана Байланыш
For further assistance or detailed technical support regarding your Velleman MK179 Proximity Card Reader Kit, please refer to the official Velleman webсайтка же кардарларды тейлөөгө кайрылыңыз.
Note: Specific warranty information is typically provided with the product packaging or on the manufacturer's official webсайт.
