Timex Intelligent Quartz Tide Temp Compass Watch User Manual

Продукт бүттүview

The Timex Intelligent Quartz Tide Temp Compass Watch is a sophisticated timepiece designed for outdoor enthusiasts and everyday wear. It features a unique combination of analog displays for time, tide, temperature, and compass functions, powered by Timex's Intelligent Quartz technology. This manual provides detailed instructions for setting up, operating, and maintaining your watch.

Сүрөт 1: Алдыңкы view of the Timex Intelligent Quartz Tide Temp Compass Watch.

Орнотуу жана баштапкы конфигурация

Before using your watch, it is important to perform the initial setup and calibration steps to ensure accurate readings for all functions.

1. Убакытты белгилөө

To set the time, pull the crown out to the outermost position. Rotate the crown to adjust the hour and minute hands to the correct time. Push the crown back in to resume timekeeping.

2. Компас калибрлөө

For accurate compass readings, the watch must be calibrated away from large metal objects and electronics. Follow these steps:

1. Place the watch on a level surface.
2. Таажыны ортоңку абалга тартыңыз.
3. Once the indicator hand stops moving, press the left pusher.
4. Slowly rotate the watch for two complete revolutions. Each revolution should take at least 15 seconds.
5. Press either pusher once complete.

3. Setting Local Declination Angle

The declination angle is the difference between magnetic north and true north, which varies by location. To set your local declination angle:

1. With the crown still in the middle position (after compass calibration), press the top pusher to move the fourth hand west, or the bottom pusher to move the hand east.
2. Each short push adjusts the hand by one degree. Consult a local map or online resource for your area's specific declination angle.
3. Once set, return the crown to the original position.

Эскертүү: Мисалы үчүнample, in New York City, the declination angle is approximately 13 degrees west.

4. Tide and Temperature Calibration

Specific calibration steps for tide and temperature are typically detailed in the full user guide. Generally, tide tracking requires setting the current high or low tide for your location, and temperature readings are most accurate when the watch is off the wrist for a period to avoid body heat interference.

Иштөө нускамалары

Using the Tide Tracker

The tide tracker counts down to high or low tide. Once calibrated to your local tide cycle, the sub-dial will indicate the current tide status, helping you plan activities near coastal areas.

Термометрди колдонуу

The watch features a thermometer to measure air and water temperature. For accurate air temperature readings, remove the watch from your wrist and allow it to acclimate to the ambient temperature for at least 15-20 minutes.

Using the Analog Compass

After calibration and declination angle setting, the analog compass provides directional guidance. Hold the watch level and allow the compass hand to settle to determine your bearing.

Indiglo түнкү жарыгы

The Indiglo light-up watch dial illuminates the entire dial for easy readability in low-light conditions. Activate by pressing the crown.

Суу каршылык

This watch is water-resistant to 100 meters (330 feet). It is suitable for snorkeling and swimming, but not for diving. Avoid operating the pushers or crown while the watch is submerged to prevent water ingress.

Техникалык тейлөө

Proper care will ensure the longevity and performance of your Timex watch.

• Тазалоо: Саатыңызды жумшак, гamp cloth. For silicone straps, mild soap and water can be used. Ensure the watch is completely dry before wearing.
• Батарея: The watch requires 1 Lithium Metal battery (included). Battery life varies depending on usage of features like Indiglo. When the battery needs replacement, it is recommended to have it done by a qualified watch technician to ensure water resistance is maintained.
• Сактагыч: Саатыңызды салкын, кургак жерде, күндүн түз тийген нурларынан жана өтө жогорку температурадан алыс сактаңыз.
• Таасирлерден качуу: Бышык болгону менен, саатты түшүрүп албоо же ички компоненттерине зыян келтириши мүмкүн болгон катуу соккуларга дуушар кылбоо керек.

Проблемаларды чечүү

Эгер саатыңызда көйгөйлөр жаралса, төмөнкү жалпы көйгөйлөрдү чечүү кадамдарын колдонуп көрүңүз:

• Watch Not Functioning/Stopped: Check if the crown is fully pushed in. If the watch still does not operate, the battery may need replacement.
• Inaccurate Compass/Tide/Temperature: Re-perform the calibration steps detailed in the "Setup and Initial Configuration" section. Ensure you are away from magnetic interference when calibrating the compass.
• Кристалл астындагы конденсация: Бул сууга туруктуулугунун жоголушун билдириши мүмкүн. Сууга андан ары түшүүдөн алыс болуп, дароо адистерге кайрылыңыз.
• Баскычтар жооп бербейт: Ensure the crown is in the correct position for the desired function. If issues persist, a professional inspection may be required.

For persistent issues not resolved by these steps, please contact Timex customer support.

Техникалык шарттар

Кепилдик жана колдоо

Timex watches are manufactured to high standards and come with a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Timex webсайт.

For further assistance, technical support, or to download the complete user guide, please visit the official Timex support page or refer to the PDF user guide available online:

Колдонуучунун толук колдонмосун жүктөп алыңыз (PDF)