Жалпы коопсуздук нускамалары
Read and understand all instructions before using the KNIPEX Crimping Pliers. Failure to follow these instructions may result in injury or damage to the tool or workpiece.
- Always wear appropriate personal protective equipment, including көз коргоо, when using hand tools.
- Ensure the tool is in good working condition before each use. Do not use damaged tools.
- Use the correct tool for the job. These pliers are designed for crimping electrical connectors; do not use them for cutting, prying, or striking.
- Иштеп жатканда колдоруңузду жана манжаларыңызды кысылган жаактардан алыс кармаңыз.
- Do not use on live electrical circuits unless the tool is specifically rated and insulated for such use. This model is not insulated for live work.
- Куралды кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.
Продукт бүттүview
The KNIPEX Crimping Pliers model 97 00 215 A are precision-engineered hand tools designed for reliable and consistent crimping of electrical connectors. They are built for durability and comfortable use, meeting the demands of professional tradesmen.
Image showing the KNIPEX Crimping Pliers model 9700215A, a hand tool designed for crimping electrical connectors. The pliers feature ergonomic handles and a robust head for efficient operation.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Precision grade performance for consistent crimps.
- Comfortable, ergonomic grip for extended use.
- Durable construction, tested for real-world conditions.
Жайгашуу
The KNIPEX Crimping Pliers are ready for use out of the packaging. No assembly is required.
- Unpack the crimping pliers from their packaging.
- Inspect the tool for any signs of damage or manufacturing defects. Do not use if damaged.
- Familiarize yourself with the crimping jaws and the handle mechanism.
- Иш аянты таза, жакшы жарык жана тоскоолдуктар жок болушун камсыз кылыңыз.
Иштөө нускамалары
Туура кысуу үчүн төмөнкү кадамдарды аткарыңыз:
- Select the Correct Terminal: Choose the appropriate electrical terminal or connector for your wire gauge and application. Ensure it is compatible with the crimping pliers.
- Зымды даярдаңыз: Strip the insulation from the end of the wire to the correct length, exposing the conductor. Avoid damaging the wire strands.
- Терминалды киргизүү: Place the terminal into the appropriate crimping die on the pliers. The crimping die should match the size and type of the terminal.
- Зымды киргизүү: Insert the stripped wire into the terminal, ensuring all strands are within the crimp barrel.
- Кысуу: Squeeze the handles of the pliers firmly and completely until the crimping cycle is finished. The pliers should release automatically or require a full squeeze to complete the crimp.
- Кримпти текшериңиз: After crimping, visually inspect the connection. It should be tight and secure, with no loose strands. Gently tug on the wire to ensure it is properly seated and cannot be pulled out.
Эскертүү: Always refer to the terminal manufacturer's specifications for recommended crimping procedures and die selection.
Техникалык тейлөө
Туура тейлөө KNIPEX кысуучу кычкачтарыңыздын иштөө мөөнөтүн жана иштешин узартат.
- Тазалоо: After each use, wipe the pliers clean with a dry cloth to remove any dirt, dust, or debris. For stubborn grime, a mild solvent can be used, ensuring it does not damage the handle material.
- Майлоо: Periodically apply a small amount of light machine oil to the pivot points and moving parts to ensure smooth operation. Wipe off any excess oil.
- Сактагыч: Store the pliers in a dry environment to prevent rust. Keep them away from corrosive materials and extreme temperatures.
- Текшерүү: Regularly inspect the crimping jaws for wear, damage, or misalignment. Check the handles for cracks or looseness. Replace the tool if significant wear or damage is observed.
Проблемаларды чечүү
If you encounter issues while using your crimping pliers, consider the following:
- Кысуучу түзүлүштүн сапаты начар:
- Ensure you are using the correct crimping die for the terminal size.
- Verify the wire is stripped to the correct length and fully inserted into the terminal.
- Apply sufficient force to fully close the pliers during the crimping cycle.
- Difficulty Closing Pliers:
- Check for any obstructions in the jaws or pivot points.
- Apply lubrication to the pivot points if they feel stiff.
- Ensure you are not attempting to crimp material beyond the tool's capacity.
- Wire Pulls Out of Crimp:
- The crimp was not fully completed or the wrong die was used.
- The wire may not have been fully inserted into the terminal.
- The terminal itself may be faulty or incompatible.
If problems persist, contact KNIPEX customer support or a qualified technician.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Өндүрүүчү | Knipex Tools LP |
| Бөлүмдүн номери | 97 00 215 А. |
| Элемент моделинин номери | 97 00 215 А. |
| UPC | 843221005986 |
| Салмагы | 454 г (1 фунт) |
| Продукциянын өлчөмдөрү (L x W x Y) | 21.72 x 6.73 x 2.92 см (8.55 x 2.65 x 1.15 дюйм) |
| Туткалардын саны | 2 |
| Grip Type | Эргономикалык |
| Батареялар керекпи? | Жок |
Кепилдик жана колдоо
KNIPEX tools are manufactured to high-quality standards and are designed for durability. For specific warranty information, please refer to the warranty documentation included with your purchase or visit the official KNIPEX webсайт.
For technical support, spare parts, or service inquiries, please contact KNIPEX customer service through their official channels. Provide your product model number (97 00 215 A) and any relevant purchase information when seeking assistance.
You can find more information and contact details on the official KNIPEX webсайт: www.knipex.com
