VOLTCRAFT PPS-13610 лабораториялык электр менен камсыздоо колдонуучусунун колдонмосу

1. Киришүү

This manual provides comprehensive instructions for the safe and efficient operation of your VOLTCRAFT PPS-13610 Laboratory Power Supply. This device is designed as a potential-free DC voltage source for various laboratory and educational applications. It features adjustable voltage and current outputs, programmable memory locations, and remote control capabilities via USB.

Сураныч, аппаратты иштетүүдөн мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.

2. Коопсуздук нускамалары

• Always operate the power supply indoors in a dry, well-ventilated area.
• Ensure the power supply is connected to a properly grounded electrical outlet.
• Түзмөктү нымдуулукка, жамгыр же өтө жогорку температурага дуушар кылбаңыз.
• Ашыкча ысып кетүүнүн алдын алуу үчүн вентиляция тешиктерин жабуудан качыңыз.
• c ачууга аракет кылбаңызasing or modify the device. Refer all servicing to qualified personnel.
• Кандайдыр бир туташууларды же ажыратууну жасоодон мурун, кубат менен камсыздоо өчүрүлгөнүн текшериңиз.
• Use appropriate safety connectors and cables for all connections.
• Be aware of the maximum current ratings for the front (5A) and rear (20A) output terminals.

3. Продукт бүтүп калдыview

The VOLTCRAFT PPS-13610 features a clear digital display and intuitive controls for precise voltage and current adjustments. Below are descriptions of the front and rear panels.

3.1 алдыңкы панели

Сүрөт: алдыңкы view of the VOLTCRAFT PPS-13610 power supply, showing the digital display, voltage and current adjustment knobs, power switch, and auxiliary output terminals.

• Санариптик дисплей: Чыныгы убактагы том көрсөтөтtage (V) and current (A) output, along with C.V. (Constant Voltage) and C.C. (Constant Current) indicators.
• Тtage Жөндөө баскычы: Used to set the output voltage. Features both fine and coarse adjustment.
• Токту жөндөө баскычы: Used to set the maximum allowable output current. Features both fine and coarse adjustment.
• Кубат которгучу: Main power control for the unit.
• Auxiliary Output (5A Max): Front terminals for connecting loads requiring up to 5 Amperes. These are 4 mm safety connectors.
• Rear Control Indicator: Illuminates when the unit is being controlled remotely.

3.2 Арткы панель

Сүрөт: Арткы view of the VOLTCRAFT PPS-13610 power supply, showing the main output terminals, cooling fan, power input, USB port, and remote control port.

• Негизги чыгышы: Clamp connections for high current applications, supporting the full rated current (up to 20A).
• Муздатуу желдеткич: Ensures proper thermal management of the unit.
• AC кубаттуулугун киргизүү: Standard IEC C14 inlet for connecting the main power cable.
• USB порт: For connecting to a computer for remote control and programming.
• Алыстан башкаруу порту: For external remote control connections.
• Режим которуу: Selects between Normal, Preset, and Remote Control modes.
• Recall Buttons (P1, P2, P3): For recalling saved voltage жана учурдагы орнотуулар.

4. Орнотуу

1. Пакеттен чыгаруу: Carefully remove the power supply from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
2. Жайгашкан жери: Place the unit on a stable, level surface. Ensure adequate clearance around the cooling fan and ventilation openings for proper airflow. Avoid direct sunlight, heat sources, and areas with excessive dust or humidity.
3. Кубат туташуу:
   • Ensure the power switch on the front panel is in the 'OFF' (O) position.
   • Connect the provided AC power cord to the AC Power Input on the rear panel and then to a suitable grounded electrical outlet (100-240V~, 50/60Hz).
4. Чыгуу туташуулары:
   • For loads requiring up to 5A, use the 4mm safety connectors on the front panel.
   • For loads requiring higher currents (up to 20A), use the clamp connections on the rear panel. Ensure connections are secure.
   • Always observe correct polarity (+ to + and - to -) when connecting your load.

5. Иштөө нускамалары

5.1 Негизги операция

1. Күйгүзүү: Flip the power switch on the front panel to the 'ON' (I) position. The digital display will illuminate.
2. Setting Voltage:
   • айлантыңыз Тtage Жөнгө салуу баскычы to set the desired output voltage.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
3. Setting Current Limit:
   • айлантыңыз Учурдагы жөндөө баскычы to set the maximum allowable output current. This acts as a current limit.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
   • The current limit can be preset without a short circuit bridge.
4. Туташуу жүк: Каалаган томду койгондон кийинtage and current limit, connect your load to the appropriate output terminals (front or rear).
5. Monitoring Output: The digital display shows the actual output voltage жана ток.
   • The CV көрсөткүчү illuminates when the power supply is operating in Constant Voltage mode (output voltage is stable at the set value).
   • The CC көрсөткүчү illuminates when the power supply is operating in Constant Current mode (output current is stable at the set limit, typically when the load resistance is too low for the set voltagжана).
6. Өчүрүү: Disconnect the load, then flip the power switch to the 'OFF' (O) position.

5.2 Using Preset Memory Locations

The PPS-13610 allows you to save and recall three different voltage and current limit settings.

1. Каалаган томду коюңузtage and current limit using the respective adjustment knobs.
2. To save, refer to the specific instructions in the full product manual (not provided in detail here).
3. To recall a saved setting, use the P1, P2, or P3 buttons on the rear panel (ensure the Mode switch is set to 'Preset').

6. Remote Control and Programmable Features

The power supply can be controlled remotely via a USB connection to a computer, enabling advanced programmable functions.

1. USB туташуу: Connect the power supply to your computer using a standard USB cable via the USB port on the rear panel.
2. Программалык камсыздоону орнотуу: Install the included software on your computer. Refer to the software's documentation for installation and usage instructions.
3. Режим тандоо: Set the 'Mode' switch on the rear panel to 'Remote Ctrl' for computer control. The 'Rear Control' indicator on the front panel will illuminate.
4. Cyclic Workflows: The software allows you to program up to 20 different voltage and current sets with varying time periods. These workflows can be repeated up to 999 times, ideal for automated testing and experimental setups.

7. Техникалык тейлөө

• Тазалоо: Тазалоодон мурун электр кубатын электр тармагынан ажыратыңыз. Сыртын сүртүү үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Вентиляция: Regularly check that the cooling fan and ventilation openings are free from dust and obstructions.
• Сактагычты алмаштыруу: Эгерде түзмөк күйбөй калса, сактагычты алмаштыруу керек болушу мүмкүн.
  • Ensure the power supply is completely disconnected from the mains.
  • Locate the fuse holder near the AC power input on the rear panel.
  • Replace the fuse with one of the same type and rating: T6AL250V.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your purchase or contact VOLTCRAFT customer service directly. Details can typically be found on the manufacturer's official webсайт же сатып алуу пункту аркылуу.

Өндүрүүчү: VOLTCRAFT