1. Продукт бүтүп калдыview
The Intermatic WG733-14D motor is a replacement component designed for use in specific Intermatic timer series. This motor is crucial for maintaining accurate timekeeping and operational cycles within compatible timer units.
Compatible Intermatic Timer Series:
- R8800 сериялары
- T1900 сериялары
- T1970 сериялары
- T8800 сериялары
This motor operates at 208/240/277V and 60 Hz, featuring 14-inch leads for connection.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Electrical shock hazard. Always disconnect power at the circuit breaker or fuse box before installing or servicing this product. Failure to do so can result in serious injury or death.
- Орнотуу квалификациялуу электрик же атайын даярдыктан өткөн персонал тарабынан аткарылышы керек.
- Бардык зымдарды туташтыруу жергиликтүү жана улуттук электр эрежелерине ылайык келишин камсыз кылыңыз.
- Томду ырастаңызtage and frequency of your timer system match the motor's specifications (208/240/277V, 60 Hz).
- Эгерде мотор бузулгандай көрүнсө, аны иштетпеңиз.
3. Пакеттин мазмуну
Пакет төмөнкү нерсени камтыйт:
- 1 x Intermatic WG733-14D Time Clock Motor
4. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Модель номери | WG733-14D |
| Бренд | Intermatic |
| Тtage | 208/240/277 Volts AC |
| Жыштык | 60 Гц |
| Коргошун узундугу | 14 дюйм |
| Материал | Lead (wiring insulation) |
| Элемент Салмагы | 1.58 унция |
| Продукциянын өлчөмдөрү | 1.25 x 1.38 x 2.13 дюйм |
5. Орнотуу боюнча нускамалар
This section provides general guidance for replacing a time clock motor. Always refer to the specific instructions for your Intermatic timer series for detailed steps.
- Кубатты өчүрүү: Before beginning any work, ensure that power to the timer unit is completely disconnected at the main circuit breaker or fuse box. Verify with a voltage сыноочу.
- Кирүү таймери: Open the timer enclosure to access the internal components. This may involve removing screws or latches.
- Эски моторду аныктоо: Locate the existing time clock motor within the timer. Note its mounting position and how it connects to the timer's gears and electrical terminals.
- Эски моторду ажыратыңыз: Carefully disconnect the electrical leads from the old motor. Note the polarity if applicable, though most AC motors are not polarity sensitive. Detach the motor from its mounting bracket or clips.
- Жаңы мотор орнотуу: Position the new Intermatic WG733-14D motor in the same location as the old one. Secure it using the existing mounting hardware or clips.
- Зымдарды туташтыруу: Connect the 14-inch leads of the new motor to the appropriate terminals within the timer. Ensure connections are secure and free from loose strands.
- Verify Gear Engagement: Confirm that the motor's drive gear properly engages with the timer's gear train. The gears should mesh smoothly without binding.
- Close Timer: Carefully close the timer enclosure, ensuring all wires are clear of moving parts and pinch points.
- Күчтү калыбына келтирүү: Restore power to the timer unit at the circuit breaker. Observe the timer's operation to ensure the motor is functioning correctly and the clock is advancing.
Эгерде сиз кандайдыр бир кадам боюнча күмөн санасаңыз, квалификациялуу электрикке кайрылыңыз.
6. Операция
The Intermatic WG733-14D motor is an integral part of your compatible Intermatic time clock. Once correctly installed, it continuously rotates, driving the internal gears of the timer mechanism. This rotation ensures that the timer accurately tracks time and executes programmed switching operations (e.g., turning devices on or off) at the designated intervals.
The motor's function is automatic upon power supply, requiring no direct user interaction for its operation beyond the initial installation and ensuring continuous power to the timer unit.
7. Техникалык тейлөө
The Intermatic WG733-14D time clock motor is designed for long-term, maintenance-free operation. However, periodic inspection of the timer unit can help ensure its longevity and proper function:
- Визуалдык текшерүү: Annually, with power disconnected, visually inspect the motor and its connections for any signs of wear, corrosion, or damage.
- Тазалык: Keep the timer enclosure clean and free from dust, debris, or insect infestations, which can impede gear movement or cause overheating.
- Коопсуз байланыштар: Ensure all electrical connections remain tight and secure.
No lubrication or internal servicing of the motor is required.
8. Кыйынчылыктарды
If your Intermatic timer is not functioning correctly after motor replacement, consider the following troubleshooting steps:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Timer clock does not advance. | Таймерге кубат жок. Motor not properly connected. Gears are jammed or misaligned. | Ажыраткычты жана электр менен жабдууну текшериңиз. Verify motor wiring connections are secure (with power off). With power off, gently check gear engagement; ensure no obstructions. |
| Timer makes unusual noise. | Gears are binding or damaged. Мотор кемчилиги. | Disconnect power and inspect gears for damage or obstructions. If noise persists, the motor may be faulty. |
| Timer operates intermittently. | Бошоң электр байланыштары. Үзгүлтүктүү электр менен камсыздоо. | With power off, check all wiring connections for tightness. Verify stable power supply to the timer. |
If troubleshooting steps do not resolve the issue, it is recommended to contact Intermatic customer support or a qualified electrician.
9. Кепилдик жана Кардарларды колдоо
Кепилдик: The warranty information for the Intermatic WG733-14D Time Clock Motor is provided by the manufacturer. Please refer to the official Intermatic documentation or webатайын кепилдик маалымат үчүн сайт.
Кардарларды колдоо: For technical assistance, replacement parts, or further inquiries, please contact Intermatic customer support directly. Contact information can typically be found on the Intermatic official webсайт же продукт таңгак.
Интерматикалык расмий Webсайт: www.intermatic.com
