Продукт бүттүview
The QA1 TS708 Shock is a high-performance, single-adjustable shock absorber designed for automotive applications, specifically for the rear position. It features a durable anodized finish and is engineered to provide precise control over vehicle suspension. This manual provides essential information for the proper installation, operation, and maintenance of your TS708 shock.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт: SHOCK STOCKER S-ADJ 13.5020.50 STUD/EYE-P.
Орнотуу жана орнотуу
Proper installation is crucial for the performance and longevity of your QA1 TS708 shock. It is recommended that installation be performed by a qualified mechanic.
Image: The QA1 TS708 shock absorber, a silver cylindrical unit with black end fittings and an adjustment dial, shown alongside its associated mounting hardware including black rubber bushings, silver washers, and hexagonal nuts.
Коопсуздук чаралары:
- Ар дайым тиешелүү жеке коргонуу шаймандарын (ЖКК), анын ичинде коргоочу көз айнектерди жана кол каптарды кийиңиз.
- Ensure the vehicle is securely supported on jack stands or a lift before beginning work.
- Домкрат гана таянып турган унаанын астында эч качан иштебеңиз.
- Refer to your vehicle's service manual for specific suspension component removal and installation procedures.
Орнотуу кадамдары (Жалпы көрсөтмөлөр):
- Унааны даярдоо: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the vehicle and support it securely.
- Эски шокту алып салуу: Carefully remove the existing shock absorber by unbolting its upper and lower mounting points. Note the orientation of any bushings or washers.
- Орнотуу чекиттерин текшерүү: Clean and inspect the vehicle's shock mounting points for any damage or wear.
- Жаңы Шокту орнотуу: Install the QA1 TS708 shock, ensuring all bushings, washers, and nuts are correctly positioned. The TS708 features a stud/eye-P mounting configuration.
- бекиткичтерди бекемдөө: Torque all fasteners to the vehicle manufacturer's specifications. Do not overtighten.
- Төмөнкү унаа: Этияттык менен унааны жерге түшүрүңүз.
- Акыркы текшерүү: Bounce the vehicle to settle the suspension and re-check all fasteners for tightness.
Иштетүү жана жөндөө
The QA1 TS708 is a single-adjustable shock, meaning its damping characteristics can be tuned to suit various driving conditions and preferences. The adjustment is typically made via a dial located on the shock body.
Жөнгө салуу көрсөтмөлөрү:
- Understanding Adjustment: The adjustment dial controls the rebound damping. Turning the dial typically increases or decreases the resistance to the shock extending.
- Баштапкы жөндөө: Start with the manufacturer's recommended baseline setting, if available, or a neutral setting (e.g., halfway through the adjustment range).
- Testing and Fine-tuning: Drive the vehicle in various conditions and adjust the shocks incrementally. A firmer setting (more damping) can improve handling and reduce body roll, while a softer setting (less damping) can improve ride comfort.
- Симметрия: Ensure both rear shocks are set to the same adjustment level for balanced performance.
- Эскертүү: Refer to QA1's official documentation or website for specific adjustment procedures and recommended settings for your application.
Техникалык тейлөө
Regular maintenance helps ensure optimal performance and extends the lifespan of your QA1 TS708 shocks.
- Үзгүлтүксүз текшерүү: Periodically inspect the shocks for signs of leaks, damage, or wear on the body, seals, and mounting points.
- Тазалык: Keep the shock bodies clean, especially around the shaft and seals, to prevent dirt and debris from causing premature wear. Use mild soap and water.
- Бекер текшерүү: Жыл сайын бардык монтаждык болттордун жана гайкалардын бекемдигин текшерип туруңуз.
- Bushing Inspection: Inspect the rubber bushings for cracking, hardening, or excessive wear. Replace them if necessary.
Проблемаларды чечүү
If you experience issues with your QA1 TS708 shocks, consider the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Excessive Bouncing/Poor Ride Control | Туура эмес damping setting, worn shock, improper installation. | тууралоо damping setting, inspect for leaks/damage, re-check installation. |
| Clunking/Rattling Noise | Loose mounting hardware, worn bushings, internal shock damage. | Tighten fasteners, replace worn bushings, inspect shock for damage. |
| Суюктуктар | Бузулган пломба, ички тетиктин бузулушу. | Shock requires replacement or professional repair. |
If troubleshooting steps do not resolve the issue, contact QA1 customer support or a certified automotive technician.
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Өндүрүүчү | QA1 Precision Products |
| Бренд | QA1 |
| Модель номери | TS708 |
| Продукциянын өлчөмдөрү | 46.23 x 10.16 x 6.1 см |
| Элемент Салмагы | 1.72 кг |
| Сырткы бүтүрүү | Аноддолгон |
| Позиция | Арткы |
| Стиль | Заманбап |
| Унаа кызматынын түрү | Жүк ташуучу унаа |
| UPC | 806990060495 |
Кепилдик жана колдоо
QA1 Precision Products stands behind the quality of its products. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official QA1 webсайт.
Кардарларды колдоо:
If you have questions regarding the installation, operation, or maintenance of your TS708 shock, or require technical assistance, please contact QA1 customer support directly. Contact information can typically be found on the QA1 official webсайт же продукт таңгак.
Note: Always provide your product model number (TS708) and any relevant purchase details when contacting support.
