Sealey 1025HL 2.25 тонналык бийик көтөргүчтүү троллейбус домкратынын колдонуу боюнча колдонмосу

1. Маанилүү коопсуздук нускамалары

Read and understand all instructions before using this trolley jack. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

• Сыйымдуулугу: Do not exceed the rated capacity of 2.25 tonnes (2250 kg).
• Туруктуу бети: Always use the jack on a hard, level, and stable surface.
• Колдоо: After lifting, always support the vehicle with appropriate jack stands before working underneath. Never rely solely on the jack for support.
• Centering Load: Ensure the load is centered on the saddle and the jack is positioned correctly under the vehicle's lifting points.
• Кыймыл: Do not move the vehicle while it is on the jack.
• Тейлөө: Regularly inspect the jack for damage or wear. Do not use if damaged.
• Персонал: Keep hands and feet clear of moving parts. Ensure no one is in the vehicle during lifting or lowering.

2. Продукт бүтүп калдыview

The Sealey 1025HL is a 2.25-tonne high lift trolley jack designed for lifting vehicles with high ground clearance, such as 4x4s, cars, and light commercial vehicles. It features a Super Rocket Lift system for rapid lifting.

1-сүрөт: Sealey 1025HL 2.25tonne High Lift Trolley Jack. This image displays the complete red trolley jack with its handle, saddle, and wheels. The jack is designed for vehicle lifting and features a robust chassis.

Негизги компоненттер:

• Ээр: The contact point for lifting the vehicle.
• Кол көтөрүү: Raises and lowers the saddle.
• туткасы: Used for pumping the jack and controlling the release valve.
• Чыгаруучу клапан: Controls the lowering speed of the jack.
• Дөңгөлөктөр: For maneuvering the jack.
• Шасси: The main frame of the jack.

3. Орнотуу жана даярдоо

1. Пакеттен чыгаруу: Carefully remove the jack from its packaging. Inspect for any signs of damage during transit.
2. Туткасы Ассамблеясы: Insert the handle into the handle socket. Secure it according to the instructions provided with the jack (typically involves aligning a pin or tightening a screw).
3. Purging Air (Bleeding): Before first use, or if the jack has been stored for a long period, it may be necessary to purge air from the hydraulic system.
   • Turn the release valve counter-clockwise to fully open it.
   • Pump the handle several times to expel any air.
   • Аны жабуу үчүн чыгаруу клапанын сааттын жебеси боюнча буруңуз.
4. Алдын ала текшерүү: Ensure all bolts and fittings are tight. Check for any hydraulic fluid leaks.

4. Иштөө нускамалары

4.1. Lifting a Vehicle

1. Даярдоо:
   • Унааны бекем, түз жерге токтотуңуз.
   • Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual).
   • Place wheel chocks on the wheels that will remain on the ground.
2. Positioning the Jack: Locate the vehicle manufacturer's recommended lifting points. Position the jack so the saddle is directly under the lifting point. Ensure the jack is stable and not on an incline.
3. Closing the Release Valve: Turn the handle clockwise until the release valve is fully closed. Do not overtighten.
4. Көтөрүү: Pump the handle up and down to raise the saddle. The Super Rocket Lift feature will quickly bring the saddle into contact with the lifting point. Continue pumping until the vehicle is raised to the desired height.
5. Secure with Jack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by gently turning the release valve counter-clockwise. Ensure the vehicle is securely resting on the jack stands before performing any work.

4.2. Lowering a Vehicle

1. Бир аз көтөрүү: If the vehicle is on jack stands, pump the jack handle a few times to lift the vehicle slightly off the jack stands.
2. Remove Jack Stands: Carefully remove the jack stands from under the vehicle.
3. Төмөндөтүү: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
4. Full Lowering: Continue to lower the vehicle until it is fully on the ground. Remove the jack from under the vehicle.

5. Техникалык тейлөө

• Майлоо: Periodically lubricate all moving parts with light machine oil.
• Гидравликалык суюктук: Check the hydraulic fluid level regularly. If low, top up with a high-quality hydraulic jack oil. Do not use brake fluid or other fluids.
• Тазалоо: Keep the jack clean and free from dirt, grease, and corrosive materials.
• Сактагыч: Store the jack in a dry, clean area with the ram fully retracted.
• Текшерүү: Before each use, inspect the jack for any signs of damage, wear, or leaks. If any issues are found, do not use the jack and consult a qualified service technician.

6. Кыйынчылыктарды

7. Техникалык шарттар

Note: The listed item weight of 0.5 kg appears to be a data anomaly for a 2.25-tonne trolley jack. Please refer to the product packaging or manufacturer's official documentation for precise weight information.

8. Кепилдик жана колдоо

For warranty information, technical support, or to order replacement parts, please refer to the documentation included with your product or contact Sealey customer service directly. Keep your purchase receipt as proof of purchase.

Өндүрүүчү: Sealey