ABUS 110/155 Hardened Steel Concealed Hinge Pin Hasp (6-1/4 Inch) Instruction Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of the ABUS 110/155 Hardened Steel Concealed Hinge Pin Hasp, 6-1/4 Inch model. This hasp is designed to enhance security by protecting against physical attacks through its hardened steel construction and concealed hinge pins.

Продукт бүттүview

The ABUS 110/155 hasp features staples and hinge pins made from hardened steel, providing robust protection. Its design incorporates concealed screws and internal hardened steel loops to secure the padlock shackle, preventing direct access to vulnerable points.

1-сүрөт: Жогорку view of the ABUS 110/155 Hasp, showing the hardened steel construction and ABUS branding.

2-сүрөт: Бурчтуу view of the ABUS 110/155 Hasp, highlighting the hinge mechanism and overall robust design.

Орнотуу жана орнотуу

1. Жайгашкан жерди тандоо: Choose a suitable surface for installation. The hasp's double and triple hinge design allows for installation around corners, providing flexibility.
2. Бетти даярдоо: Монтаждоо бетинин таза, кургак жана структуралык жактан бекем болушун камсыз кылыңыз.
3. Position Hasp: Place the hasp in the desired position. Mark the locations for the mounting holes on both the hasp side and the shackle side.
4. Бургулоочу тешиктер: Drill pilot holes according to the size of the provided mounting hardware (bolts and screws). Exercise caution when drilling into hardened steel components; specialized drill bits may be required if attempting to enlarge existing holes in the hardened steel sections.
5. Secure Hasp: Attach the hasp using the provided mounting hardware. Ensure all screws and bolts are tightened securely. The design conceals fasteners when the hasp is locked, enhancing security.
6. Padlock Compatibility: Ensure the padlock chosen has a shackle that fits through the hasp's shackle hole (approximately 12.5 mm or 0.49 inches) and that its security rating matches or exceeds that of the hasp.

Figure 3: The ABUS 110/155 Hasp shown installed and secured with a compatible padlock.

Иштөө нускамалары

To operate the ABUS 110/155 hasp:

1. Бекитүү: Close the hasp by aligning the shackle hole of the moving arm with the fixed shackle loop. Insert a compatible padlock through the aligned holes and secure the padlock. This action conceals the mounting screws and the hinge pin, enhancing security.
2. Кулпуну ачуу үчүн: Unlock and remove the padlock. Pivot the moving arm of the hasp away from the fixed shackle loop to open.

Техникалык тейлөө

The ABUS 110/155 hasp is constructed from durable hardened steel and requires minimal maintenance. Regular inspection is recommended to ensure optimal performance:

• Тазалоо: Periodically wipe the hasp with a clean, damp кирди жана калдыктарды тазалоо үчүн кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан алыс болуңуз.
• Майлоо: If the hinge mechanism becomes stiff, apply a small amount of silicone-based lubricant to the hinge pins.
• Текшерүү: Check for any signs of wear, damage, or loose mounting hardware. Tighten any loose fasteners immediately.

Проблемаларды чечүү

• Difficulty Drilling Mounting Holes: The hasp features hardened steel components. If you need to enlarge existing holes or drill new ones in the hardened sections, use appropriate high-quality drill bits (e.g., cobalt or carbide-tipped) and apply steady pressure with a slow drill speed.
• Hasp Does Not Close Properly:
  • Check for obstructions around the hinge or shackle area.
  • Ensure the mounting surfaces are level and the hasp is installed without tension or misalignment.
  • Verify that the padlock shackle is not bent or damaged.
• Кулпу туура келбейт: Confirm the padlock shackle diameter is compatible with the hasp's shackle hole (approximately 12.5 mm / 0.49 inches).

Техникалык шарттар

Кепилдик жана колдоо

ABUS products are warranted for specific periods of time from the date of purchase. If an ABUS product fails to work properly due to a manufacturing defect, return it to ABUS postage prepaid. ABUS will repair or replace the product at its discretion. Specific warranty periods are detailed on the product packaging.

For further assistance or support, please refer to the contact information provided on your product packaging or visit the official ABUS webсайт.