1. Продукт бүтүп калдыview
This manual provides instructions for the Viqua SHO600-QL UV Lamp and Quartz Sleeve Combo Kit. This kit is designed for use with Viqua UV systems including models SPV-12, SPV-600, SP600-HO, and SC/SCM-600. The ultraviolet (UV) lamp and quartz sleeve are critical components for maintaining the effectiveness of your UV water treatment system, ensuring proper disinfection by emitting specific UV intensity.
2. Продукциянын компоненттери
The Viqua SHO600-QL kit includes the following genuine Viqua components:
- One (1) Viqua UV Lamp: A high-output ultraviolet lamp with a proprietary stepped 4-pin configuration and a grey bulb base.
- One (1) Quartz Sleeve: A protective glass sleeve that houses the UV lamp within the UV system chamber.

Image 1: Viqua SHO600-QL UV Lamp and Quartz Sleeve. This image displays the two main components of the kit: the UV lamp with its grey base and 4-pin connector, and the clear quartz sleeve.
3. Коопсуздук боюнча маанилүү маалымат
Please read and understand all safety warnings before handling or installing the UV lamp жана кварц жеңи.
- Электр коркунучу: Always disconnect power to the UV system before performing any maintenance or installation.
- UV нурлануу: Do not look directly at an illuminated UV lamp. Exposure to UV light can cause severe eye and skin damage.
- Морт компоненттери: UV лamp and quartz sleeve are made of glass. Handle with extreme care to prevent breakage.
- Ысык беттер: UV лamp and surrounding components can become hot during operation. Allow the system to cool before handling.
4. Орнотуу боюнча көрсөтмөлөр
These are general guidelines. Refer to your specific Viqua UV system's manual for detailed installation instructions.
- Кубатты өчүрүү: Turn off and unplug the UV system from its power source.
- Сууну өчүрүү: Close the water supply valves to the UV system to prevent water flow.
- Дренаж системасы (зарыл болсо): If replacing the quartz sleeve, drain the UV chamber to avoid water spillage.
- Эски компоненттерди алып салуу: Этияттык менен эски UV л алып салууamp and quartz sleeve according to your system's instructions. Dispose of old lampжоопкерчилик менен.
- Install New Quartz Sleeve: If replacing, gently insert the new quartz sleeve into the UV chamber. Ensure the sleeve is properly seated and sealed with the provided O-rings and retaining nut. Avoid touching the glass directly; use clean gloves or a soft cloth.
- Жаңы UV L орнотууamp: Этияттык менен жаңы UV л киргизиңизamp into the quartz sleeve. Align the 4-pin connector with the lamp connector on the system's power supply. Push firmly until it clicks into place.
- Суу жана электр кубатын калыбына келтирүү: Slowly open the water supply valves. Check for leaks. Once confirmed, plug in and turn on the UV system.
- Ишти текшерүү: Confirm the UV lamp indicator light is on, indicating proper lamp функция.
5. Операция
Once installed and powered, the UV lamp emits ultraviolet light within the quartz sleeve. As water flows through the UV chamber, it is exposed to this UV light, which inactivates bacteria, viruses, and other microorganisms without adding chemicals to the water. The system's ballast or controller typically includes an indicator light or alarm to confirm the lamp is operating correctly or if it requires attention.
6. Техникалык тейлөө
Regular maintenance is crucial for the continuous effectiveness of your UV system.
- УВ Лamp Алмаштыруу: UV лamps have a limited effective life, typically 9,000 hours (approximately 12 months) of continuous operation. Even if the lamp appears to be glowing, its UV output diminishes over time. Replace the UV lamp annually to ensure consistent water disinfection.
- Quartz Sleeve Cleaning: The quartz sleeve should be cleaned periodically (e.g., every 3-6 months, or as water quality dictates) to remove any mineral deposits or fouling that can reduce UV light transmission. If the sleeve cannot be cleaned effectively, it should be replaced.
- Use Genuine Viqua Parts: Always use genuine Viqua replacement lamps and sleeves. Non-genuine or
Тектеш документтер - SHO600-QL

VIQUA UVMAX Lamp жана кварц жеңин алмаштыруу боюнча нускамалар
UV л алмаштыруу боюнча комплекстүү нускама баракчасыamp жана VIQUA UVMAX H, K, H+, K+, PRO10, PRO20, PRO30 жана PRO50 UV суу тазалоо системаларында кварц жеңди тазалоо/алмаштыруу. Толук коопсуздук эскертүүлөрүн, кадам-кадам процедураларын жана тейлөө кеңештерин камтыйт.
VIQUA UV Lamp жана кварц жеңин алмаштыруу боюнча нускама баракчасы
UV лди кантип коопсуз алмаштырууну үйрөнүңүзamp жана VIQUA UV дезинфекциялоо системалары үчүн кварц жеңди тазалаңыз же алмаштырыңыз. Бул нускама баракчасы коопсуздук чараларын, техникалык тейлөө жол-жоболорун жана сымап камтыган заттарды туура утилдештирүүнү камтыйт.amps.
VIQUA UVMAX Lamp and Quartz Sleeve Replacement Guide
This instruction sheet provides detailed guidance for replacing the UV lamp and quartz sleeve in VIQUA UVMAX water purification systems, including models H, K, PRO10, PRO20, PRO30, PRO50, PRO24-186, and PRO24-100. It covers essential safety precautions and maintenance procedures for optimal system performance.
VIQUA D4 UV суу тутумунун ээсинин колдонмосу жана орнотуу боюнча колдонмо
VIQUA D4 UV суу тутумунун коопсуздук, эксплуатация, тейлөө, бузулууларды аныктоо жана спецификацияларды камтыган комплекстүү ээсинин колдонмосу жана орнотуу көрсөтмөсү. Оптималдуу иштөө жана коопсуздук үчүн UV суу тазалоо тутумуңузду кантип орнотууну, иштетүүнү жана тейлөөнү үйрөнүңүз.
VIQUA UV Lamp жана кварц жеңин алмаштыруу жана тейлөө боюнча нускама баракчасы
UV л алмаштыруу жана сактоо боюнча комплекстүү нускама баракчасыampVIQUA UV сууну дезинфекциялоо тутумдарындагы с жана кварц жеңдер, анын ичинде Tap, Home жана Professional серияларынын моделдери. Коопсуздук чаралары, этап-этабы менен жол-жоболор жана техникалык тейлөө боюнча негизги кеңештер жөнүндө билип алыңыз.
VIQUA UV Water System Owner's Manual | Installation, Operation, Maintenance
Comprehensive owner's manual for VIQUA UV water purification systems, including models VH150, VH200, VH410, VP600, VP950, and M-series. Covers safety, installation, operation, maintenance, troubleshooting, and specifications for optimal water treatment.