1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your Glacier Bay Brushed Nickel Builder Paper Holder, Model 350-587. Designed for durability and ease of use, this wall-mounted accessory features a brushed nickel finish, complementing various bathroom decors. Please read these instructions thoroughly before beginning installation to ensure proper setup and long-lasting performance.

1-сүрөт: Негизги view of the Glacier Bay Brushed Nickel Builder Paper Holder.
2. Пакеттин мазмуну
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer service.
- Даараткана кагазын кармагычтын жыйындысы
- Монтаждоо кронштейндери
- Монтаждоо бурамалар
- Wall Anchors (if applicable)
- Hex Wrench (if applicable for set screws)
3. Орнотуу үчүн зарыл болгон куралдар
- Карандаш
- Өлчөө лентасы
- Деңгээл
- Филлипс баш бурагычы
- Drill with appropriate drill bit (for wall anchors)
- Балка (дубал казыктары үчүн)
4. Орнотуу боюнча нускамалар
The Glacier Bay Builder Paper Holder is designed for wall-mounted installation. Follow these steps carefully:
- Монтаждоо ордун аныктоо: Choose a suitable location on the wall, ensuring it is level and at a comfortable height for use. Use a pencil to mark the desired position.
- Disassemble the Holder: Separate the mounting bracket(s) from the main holder assembly. This usually involves loosening a set screw with a hex wrench or twisting the base.
- Бургулоо тешиктерин белгилөө: Place the mounting bracket(s) against the wall at your marked location. Use a level to ensure it is straight. Mark the positions for the drill holes through the bracket(s) with a pencil.
- Бургулоочу тешиктер: Using a drill with an appropriate drill bit (typically 1/4 inch for drywall anchors), drill pilot holes at the marked locations. If drilling into a wall stud, a smaller pilot hole may be sufficient.
- Insert Wall Anchors (if needed): If drilling into drywall without a stud, gently tap the plastic wall anchors into the pilot holes with a hammer until they are flush with the wall surface.
- Attach Mounting Bracket(s): Position the mounting bracket(s) over the pilot holes/anchors. Secure them to the wall using the provided mounting screws and a Phillips head screwdriver. Ensure the brackets are firmly attached.
- Secure the Paper Holder: Align the main paper holder assembly with the attached mounting bracket(s). Slide or attach the holder onto the bracket(s) and secure it by tightening the set screw(s) (if applicable) or by twisting the base until it locks into place.

Figure 2: Installed paper holder on a tiled wall, ready for use.
5. Иштөө нускамалары
To load or replace a toilet paper roll:
- Remove the Old Roll: If an old roll is present, remove it from the holder.
- Шпинделге кирүү: The holder typically uses a spring-loaded spindle or a removable bar.
- For a spring-loaded spindle: Compress the spindle and remove it from the holder.
- For a removable bar: Lift one end of the bar out of its socket.
- Жаңы рулонду жүктөө: Place a new standard-sized toilet paper roll onto the spindle or bar.
- Reinstall Spindle/Bar:
- For a spring-loaded spindle: Compress it again and insert it back into the holder's arms, releasing it to secure the roll.
- For a removable bar: Insert the bar back into its sockets, ensuring it is securely seated.

Figure 3: Paper holder with a toilet paper roll in place.
6. Техникалык тейлөө жана кам көрүү
To maintain the brushed nickel finish and ensure the longevity of your paper holder, follow these care instructions:
- Тазалоо: жумшак менен үзгүлтүксүз тазалоо, гamp cloth. For stubborn spots, use a mild soap solution and immediately dry with a clean, soft cloth.
- Катуу тазалагычтардан качыңыз: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any cleaners containing bleach, acids, or harsh chemicals, as these can damage the finish.
- Мезгилдүү текшерүүлөр: Periodically check the mounting screws for tightness and re-tighten if necessary to prevent wobbling.
7. Кыйынчылыктарды
If you encounter any issues with your paper holder, refer to the following common solutions:
- Holder is Loose/Wobbly:
- Check if the mounting screws are tight. Re-tighten them with a Phillips head screwdriver.
- Ensure the set screw (if present) securing the holder to the mounting bracket is fully tightened.
- If wall anchors were used, ensure they are properly seated and not stripped. You may need to use larger anchors or relocate the holder if the wall material is compromised.
- Toilet Paper Roll Does Not Fit:
- Ensure you are using a standard-sized toilet paper roll. Oversized or jumbo rolls may not fit all holders.
- Verify the spindle or bar is correctly installed and not obstructed.
8. Техникалык шарттар
| Бренд | Glacier Bay |
| Модель номери | 350-587 |
| Материал | Никель |
| Аяктоо түрү | Brushed |
| Түс | Никель |
| Орнотуу түрү | Дубалга орнотулган |
| Элемент Салмагы | 8 унция |
| Пакеттин өлчөмдөрү | 10.5 x 4.8 x 2.3 дюйм |
| UPC | 019934085663 |
9. Кепилдик жана колдоо
For specific warranty information, please refer to the documentation included with your purchase or visit the official Glacier Bay website. If you require further assistance or have questions not covered in this manual, please contact Glacier Bay customer support.
Note: Product specifications and design are subject to change without notice.





